Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 11 Feb 2021 18:35:42 +0530
From:   karthik alapati <mail@karthek.com>
To:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Stephen Rothwell <sfr@canb.auug.org.au>
Cc:     devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 1/2] staging: rtl8723bs: fix function comments to follow
 kernel-doc
Message-ID: <ca8feff68a247c54b67d9c19555d1d8c1f16ebfe.1613048573.git.mail@karthek.com>
References: <cover.1613048573.git.mail@karthek.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <cover.1613048573.git.mail@karthek.com>
Precedence: bulk

there are some good function comments not following
kernel-doc. Make them follow kernel-doc style

Signed-off-by: karthik alapati <mail@karthek.com>
---
 .../staging/rtl8723bs/hal/rtl8723b_phycfg.c   | 185 +++++++-----------
 1 file changed, 73 insertions(+), 112 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
index cf23414d7..77132e4ee 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_phycfg.c
@@ -20,16 +20,11 @@
 #define MAX_DOZE_WAITING_TIMES_9x 64
 
 /**
-* Function:	phy_CalculateBitShift
-*
-* OverView:	Get shifted position of the BitMask
-*
-* Input:
-*		u32 	BitMask,
-*
-* Output:	none
-* Return:		u32 	Return the shift bit bit position of the mask
-*/
+ * phy_CalculateBitShift - Get shifted position of the BitMask.
+ * @BitMask: Bitmask.
+ *
+ * Return:	Return the shift bit position of the mask
+ */
 static	u32 phy_CalculateBitShift(u32 BitMask)
 {
 	u32 i;
@@ -43,19 +38,17 @@ static	u32 phy_CalculateBitShift(u32 BitMask)
 
 
 /**
-* Function:	PHY_QueryBBReg
-*
-* OverView:	Read "specific bits" from BB register
-*
-* Input:
-*		struct adapter *	Adapter,
-*		u32 		RegAddr,	The target address to be readback
-*		u32 		BitMask		The target bit position in the target address
-*							to be readback
-* Output:	None
-* Return:		u32 		Data		The readback register value
-* Note:		This function is equal to "GetRegSetting" in PHY programming guide
-*/
+ * PHY_QueryBBReg - Read "specific bits" from BB register.
+ * @Adapter:
+ * @RegAddr:	The target address to be readback
+ * @BitMask:	The target bit position in the target address
+ *				to be readback
+ *
+ * Return:	The readback register value
+ *
+ * .. Note::	This function is equal to "GetRegSetting" in PHY programming
+ *			guide
+ */
 u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
 {
 	u32 OriginalValue, BitShift;
@@ -75,22 +68,17 @@ u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask)
 
 
 /**
-* Function:	PHY_SetBBReg
-*
-* OverView:	Write "Specific bits" to BB register (page 8~)
-*
-* Input:
-*		struct adapter *	Adapter,
-*		u32 		RegAddr,	The target address to be modified
-*		u32 		BitMask		The target bit position in the target address
-*								to be modified
-*		u32 		Data		The new register value in the target bit position
-*								of the target address
-*
-* Output:	None
-* Return:		None
-* Note:		This function is equal to "PutRegSetting" in PHY programming guide
-*/
+ * PHY_SetBBReg - Write "Specific bits" to BB register (page 8~).
+ * @Adapter:
+ * @RegAddr:	The target address to be modified
+ * @BitMask:	The target bit position in the target address
+ *				to be modified
+ * @Data:		The new register value in the target bit position
+ *				of the target address
+ *
+ * .. Note::	This function is equal to "PutRegSetting" in PHY programming
+ *			guide
+ */
 
 void PHY_SetBBReg_8723B(
 	struct adapter *Adapter,
@@ -184,27 +172,21 @@ static u32 phy_RFSerialRead_8723B(
 }
 
 /**
-* Function:	phy_RFSerialWrite_8723B
-*
-* OverView:	Write data to RF register (page 8~)
-*
-* Input:
-*		struct adapter *	Adapter,
-*		RF_PATH			eRFPath,	Radio path of A/B/C/D
-*		u32 		Offset,		The target address to be read
-*		u32 		Data		The new register Data in the target bit position
-*								of the target to be read
-*
-* Output:	None
-* Return:		None
-* Note:		Threre are three types of serial operations:
-*		1. Software serial write
-*		2. Hardware LSSI-Low Speed Serial Interface
-*		3. Hardware HSSI-High speed
-*		serial write. Driver need to implement (1) and (2).
-*		This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
+ * phy_RFSerialWrite_8723B - Write data to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath:	Radio path of A/B/C/D
+ * @Offset:	The target address to be read
+ * @Data:	The new register Data in the target bit position
+ *			of the target to be read
+ *
+ * .. Note::	Threre are three types of serial operations:
+ *		1. Software serial write
+ *		2. Hardware LSSI-Low Speed Serial Interface
+ *		3. Hardware HSSI-High speed
+ *		serial write. Driver need to implement (1) and (2).
+ *		This function is equal to the combination of RF_ReadReg() and  RFLSSIRead()
  *
- * Note:		  For RF8256 only
+ * .. Note::		  For RF8256 only
  *		 The total count of RTL8256(Zebra4) register is around 36 bit it only employs
  *		 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10])
  *		 to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration
@@ -225,7 +207,7 @@ static u32 phy_RFSerialRead_8723B(
  *
  *
  *
-*/
+ */
 static void phy_RFSerialWrite_8723B(
 	struct adapter *Adapter,
 	enum RF_PATH eRFPath,
@@ -261,21 +243,18 @@ static void phy_RFSerialWrite_8723B(
 
 
 /**
-* Function:	PHY_QueryRFReg
-*
-* OverView:	Query "Specific bits" to RF register (page 8~)
-*
-* Input:
-*		struct adapter *	Adapter,
-*		RF_PATH			eRFPath,	Radio path of A/B/C/D
-*		u32 		RegAddr,	The target address to be read
-*		u32 		BitMask		The target bit position in the target address
-*								to be read
-*
-* Output:	None
-* Return:		u32 		Readback value
-* Note:		This function is equal to "GetRFRegSetting" in PHY programming guide
-*/
+ * PHY_QueryRFReg - Query "Specific bits" to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath:	Radio path of A/B/C/D
+ * @RegAdd:	The target address to be read
+ * @BitMask:	The target bit position in the target address
+ *				to be read
+ *
+ * Return:	Readback value
+ *
+ * .. Note::	This function is equal to "GetRFRegSetting" in PHY
+ *			programming guide
+ */
 u32 PHY_QueryRFReg_8723B(
 	struct adapter *Adapter,
 	u8 eRFPath,
@@ -296,23 +275,18 @@ u32 PHY_QueryRFReg_8723B(
 }
 
 /**
-* Function:	PHY_SetRFReg
-*
-* OverView:	Write "Specific bits" to RF register (page 8~)
-*
-* Input:
-*		struct adapter *	Adapter,
-*		RF_PATH			eRFPath,	Radio path of A/B/C/D
-*		u32 		RegAddr,	The target address to be modified
-*		u32 		BitMask		The target bit position in the target address
-*								to be modified
-*		u32 		Data		The new register Data in the target bit position
-*								of the target address
-*
-* Output:	None
-* Return:		None
-* Note:		This function is equal to "PutRFRegSetting" in PHY programming guide
-*/
+ * PHY_SetRFReg - Write "Specific bits" to RF register (page 8~).
+ * @Adapter:
+ * @eRFPath:	Radio path of A/B/C/D
+ * @RegAddr:	The target address to be modified
+ * @BitMask:	The target bit position in the target address
+ *				to be modified
+ * @Data:	The new register Data in the target bit position
+ *								of the target address
+ *
+ * .. Note::	This function is equal to "PutRFRegSetting" in PHY
+ *			programming guide.
+ */
 void PHY_SetRFReg_8723B(
 	struct adapter *Adapter,
 	u8 eRFPath,
@@ -344,15 +318,7 @@ void PHY_SetRFReg_8723B(
 
 
 /*-----------------------------------------------------------------------------
- * Function:    PHY_MACConfig8192C
- *
- * Overview:	Condig MAC by header file or parameter file.
- *
- * Input:       NONE
- *
- * Output:      NONE
- *
- * Return:      NONE
+ * PHY_MACConfig8192C - Condig MAC by header file or parameter file.
  *
  * Revised History:
  *  When		Who		Remark
@@ -369,17 +335,12 @@ s32 PHY_MACConfig8723B(struct adapter *Adapter)
 }
 
 /**
-* Function:	phy_InitBBRFRegisterDefinition
-*
-* OverView:	Initialize Register definition offset for Radio Path A/B/C/D
-*
-* Input:
-*		struct adapter *	Adapter,
-*
-* Output:	None
-* Return:		None
-* Note:		The initialization value is constant and it should never be changes
-*/
+ * phy_InitBBRFRegisterDefinition - Initialize Register definition offset for
+ *									Radio Path A/B/C/D
+ * @Adapter:
+ *
+ * .. Note::		The initialization value is constant and it should never be changes
+ */
 static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter)
 {
 	struct hal_com_data		*pHalData = GET_HAL_DATA(Adapter);
-- 
2.30.0