Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Thu, 11 Feb 2021 14:02:27 +0000
From:   Russell King - ARM Linux admin <linux@armlinux.org.uk>
To:     Kostya Porotchkin <kostap@marvell.com>
Cc:     Jon Nettleton <jon@solid-run.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>,
        "robh+dt@kernel.org" <robh+dt@kernel.org>,
        "sebastian.hesselbarth@gmail.com" <sebastian.hesselbarth@gmail.com>,
        "gregory.clement@bootlin.com" <gregory.clement@bootlin.com>,
        "andrew@lunn.ch" <andrew@lunn.ch>,
        "mw@semihalf.com" <mw@semihalf.com>,
        "jaz@semihalf.com" <jaz@semihalf.com>,
        Nadav Haklai <nadavh@marvell.com>,
        Stefan Chulski <stefanc@marvell.com>,
        Ben Peled <bpeled@marvell.com>
Subject: Re: [EXT] Re: [PATCH v2 01/12] fix: arm64: dts: replace wrong
 regulator on ap emmc
Message-ID: <20210211140227.GL1463@shell.armlinux.org.uk>
References: <20210210140949.32515-1-kostap@marvell.com>
 <20210210140949.32515-2-kostap@marvell.com>
 <20210211105222.GY1463@shell.armlinux.org.uk>
 <DM5PR18MB1452DFBCDCE970384339545BCA8C9@DM5PR18MB1452.namprd18.prod.outlook.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <DM5PR18MB1452DFBCDCE970384339545BCA8C9@DM5PR18MB1452.namprd18.prod.outlook.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Precedence: bulk

On Thu, Feb 11, 2021 at 01:57:25PM +0000, Kostya Porotchkin wrote:
> 
> > ----------------------------------------------------------------------
> > On Wed, Feb 10, 2021 at 04:09:38PM +0200, kostap@marvell.com wrote:
> > > From: Konstantin Porotchkin <kostap@marvell.com>
> > >
> > > Replace wrong regulator in AP0 eMMC definition on MacchiatoBIN board
> > > with 3.3V regulator.
> > > The MacchiatoBIN board has no 1.8V regulator connected to AP0 eMMC
> > > (ap0_sdhci0) interface.
> > 
> > There seems to be some variability between Macchiatobin versions according
> > to the schematics.
> > 
> > The VDDO_H supply is connected to the eMMC VCCQ pins, and is also
> > connected to the AP_VDDO_H pins. It is wired to the 1.8V regulator on rev 1.1
> > schematics, but hard-wired to the 3.3V regulator on rev 1.3 schematics.
> > 
> > This needs clarification from SolidRun before the patch can be accepted - was
> > VDDO_H ever wired to the 1.8V regulator on production hardware?
> > 
> [KP] I will try to find a relevant contact in SolidRun for get this issue clarified.

I've already added Jon Nettleton.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!