Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: qUpi0zZKvC5FoKNmoa3V5m8MSZpe7qKRGaqF5UQfJjE2zJXDT1PIfggQkBEDQW/oIrgSapghX2
 1y91HfUYxB4g==
IronPort-SDR: rDvZwF3246golPewl0O+aInDBwt8buurES4YPGm0Tx5j1HN2Y+HFXejnwAd8JPufiXP/YUTBQA
 NY9CeC2oZJfg==
Date:   Thu, 11 Feb 2021 09:45:02 -0800
From:   Ben Widawsky <ben.widawsky@intel.com>
To:     Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc:     linux-cxl@vger.kernel.org, linux-acpi@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-nvdimm@lists.01.org,
        linux-pci@vger.kernel.org, Bjorn Helgaas <helgaas@kernel.org>,
        Chris Browy <cbrowy@avery-design.com>,
        Christoph Hellwig <hch@infradead.org>,
        Dan Williams <dan.j.williams@intel.com>,
        David Hildenbrand <david@redhat.com>,
        David Rientjes <rientjes@google.com>,
        Ira Weiny <ira.weiny@intel.com>,
        Jon Masters <jcm@jonmasters.org>,
        Rafael Wysocki <rafael.j.wysocki@intel.com>,
        Randy Dunlap <rdunlap@infradead.org>,
        Vishal Verma <vishal.l.verma@intel.com>,
        "John Groves (jgroves)" <jgroves@micron.com>,
        "Kelley, Sean V" <sean.v.kelley@intel.com>
Subject: Re: [PATCH v2 6/8] cxl/mem: Enable commands via CEL
Message-ID: <20210211174502.72thmdqlh2q5tdu3@intel.com>
References: <20210210000259.635748-1-ben.widawsky@intel.com>
 <20210210000259.635748-7-ben.widawsky@intel.com>
 <20210211120215.00007d3d@Huawei.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210211120215.00007d3d@Huawei.com>
Precedence: bulk

On 21-02-11 12:02:15, Jonathan Cameron wrote:
> On Tue, 9 Feb 2021 16:02:57 -0800
> Ben Widawsky <ben.widawsky@intel.com> wrote:
> 
> > CXL devices identified by the memory-device class code must implement
> > the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec).
> > While the driver already maintains a list of commands it supports, there
> > is still a need to be able to distinguish between commands that the
> > driver knows about from commands that are optionally supported by the
> > hardware.
> > 
> > The Command Effects Log (CEL) is specified in the CXL 2.0 specification.
> > The CEL is one of two types of logs, the other being vendor specific.
> 
> I'd say "vendor specific debug" just so that no one thinks it has anything
> to do with the rest of this description (which mentioned vendor specific
> commands).
> 
> > They are distinguished in hardware/spec via UUID. The CEL is useful for
> > 2 things:
> > 1. Determine which optional commands are supported by the CXL device.
> > 2. Enumerate any vendor specific commands
> > 
> > The CEL is used by the driver to determine which commands are available
> > in the hardware and therefore which commands userspace is allowed to
> > execute. The set of enabled commands might be a subset of commands which
> > are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL.
> > 
> > The implementation leaves the statically defined table of commands and
> > supplements it with a bitmap to determine commands that are enabled.
> > This organization was chosen for the following reasons:
> > - Smaller memory footprint. Doesn't need a table per device.
> > - Reduce memory allocation complexity.
> > - Fixed command IDs to opcode mapping for all devices makes development
> >   and debugging easier.
> > - Certain helpers are easily achievable, like cxl_for_each_cmd().
> > 
> > Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
> > Reviewed-by: Dan Williams <dan.j.williams@intel.com>
> > ---
> >  drivers/cxl/cxl.h            |   2 +
> >  drivers/cxl/mem.c            | 216 +++++++++++++++++++++++++++++++++++
> >  include/uapi/linux/cxl_mem.h |   1 +
> >  3 files changed, 219 insertions(+)
> > 
> > diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
> > index b3c56fa6e126..9a5e595abfa4 100644
> > --- a/drivers/cxl/cxl.h
> > +++ b/drivers/cxl/cxl.h
> > @@ -68,6 +68,7 @@ struct cxl_memdev;
> >   *                (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register)
> >   * @mbox_mutex: Mutex to synchronize mailbox access.
> >   * @firmware_version: Firmware version for the memory device.
> > + * @enabled_commands: Hardware commands found enabled in CEL.
> >   * @pmem: Persistent memory capacity information.
> >   * @ram: Volatile memory capacity information.
> >   */
> > @@ -83,6 +84,7 @@ struct cxl_mem {
> >  	size_t payload_size;
> >  	struct mutex mbox_mutex; /* Protects device mailbox and firmware */
> >  	char firmware_version[0x10];
> > +	unsigned long *enabled_cmds;
> >  
> >  	struct {
> >  		struct range range;
> > diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
> > index 6d766a994dce..e9aa6ca18d99 100644
> > --- a/drivers/cxl/mem.c
> > +++ b/drivers/cxl/mem.c
> > @@ -45,6 +45,8 @@ enum opcode {
> >  	CXL_MBOX_OP_INVALID		= 0x0000,
> >  	CXL_MBOX_OP_RAW			= CXL_MBOX_OP_INVALID,
> >  	CXL_MBOX_OP_ACTIVATE_FW		= 0x0202,
> > +	CXL_MBOX_OP_GET_SUPPORTED_LOGS	= 0x0400,
> > +	CXL_MBOX_OP_GET_LOG		= 0x0401,
> >  	CXL_MBOX_OP_IDENTIFY		= 0x4000,
> >  	CXL_MBOX_OP_SET_PARTITION_INFO	= 0x4101,
> >  	CXL_MBOX_OP_SET_LSA		= 0x4103,
> > @@ -103,6 +105,19 @@ static DEFINE_IDA(cxl_memdev_ida);
> >  static struct dentry *cxl_debugfs;
> >  static bool raw_allow_all;
> >  
> > +enum {
> > +	CEL_UUID,
> > +	VENDOR_DEBUG_UUID
> 
> Who wants to take a bet this will get extended at somepoint in the future?
> Add a trailing comma to make that less noisy.
> 
> They would never have used a UUID if this wasn't expected to expand.
> CXL spec calls out that "The following Log Identifier UUIDs are defined in _this_
> specification" rather implying other specs may well define more.
> Fun for the future!
> 
> > +};
> > +
> > +/* See CXL 2.0 Table 170. Get Log Input Payload */
> > +static const uuid_t log_uuid[] = {
> > +	[CEL_UUID] = UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96,
> > +			       0xb1, 0x62, 0x3b, 0x3f, 0x17),
> > +	[VENDOR_DEBUG_UUID] = UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f,
> > +					0xd6, 0x07, 0x19, 0x40, 0x3d, 0x86)
> 
> likewise on trailing comma
> 
> > +};
> > +
> >  /**
> >   * struct cxl_mem_command - Driver representation of a memory device command
> >   * @info: Command information as it exists for the UAPI
> > @@ -111,6 +126,8 @@ static bool raw_allow_all;
> >   *
> >   *  * %CXL_CMD_FLAG_MANDATORY: Hardware must support this command. This flag is
> >   *    only used internally by the driver for sanity checking.
> > + *  * %CXL_CMD_INTERNAL_FLAG_PSEUDO: This is a pseudo command which doesn't have
> > + *    a direct mapping to hardware. They are implicitly always enabled.
> 
> Stale comment?
> 
> >   *
> >   * The cxl_mem_command is the driver's internal representation of commands that
> >   * are supported by the driver. Some of these commands may not be supported by
> > @@ -146,6 +163,7 @@ static struct cxl_mem_command mem_commands[] = {
> >  #ifdef CONFIG_CXL_MEM_RAW_COMMANDS
> >  	CXL_CMD(RAW, NONE, ~0, ~0),
> >  #endif
> > +	CXL_CMD(GET_SUPPORTED_LOGS, NONE, 0, ~0),
> >  };
> >  
> >  /*
> > @@ -627,6 +645,10 @@ static int cxl_validate_cmd_from_user(struct cxl_mem *cxlm,
> >  	c = &mem_commands[send_cmd->id];
> >  	info = &c->info;
> >  
> > +	/* Check that the command is enabled for hardware */
> > +	if (!test_bit(info->id, cxlm->enabled_cmds))
> > +		return -ENOTTY;
> > +
> >  	if (info->flags & CXL_MEM_COMMAND_FLAG_KERNEL)
> >  		return -EPERM;
> >  
> > @@ -869,6 +891,14 @@ static struct cxl_mem *cxl_mem_create(struct pci_dev *pdev, u32 reg_lo,
> >  	mutex_init(&cxlm->mbox_mutex);
> >  	cxlm->pdev = pdev;
> >  	cxlm->regs = regs + offset;
> > +	cxlm->enabled_cmds =
> > +		devm_kmalloc_array(dev, BITS_TO_LONGS(cxl_cmd_count),
> > +				   sizeof(unsigned long),
> > +				   GFP_KERNEL | __GFP_ZERO);
> 
> Hmm. There doesn't seem to be a devm_bitmap_zalloc
> 
> Embarrassingly one of the google hits on the topic is me suggesting
> this in a previous review (that I'd long since forgotten)
> 
> Perhaps one for a refactoring patch after this lands.
> 
> 
> > +	if (!cxlm->enabled_cmds) {
> > +		dev_err(dev, "No memory available for bitmap\n");
> > +		return NULL;
> > +	}
> >  
> >  	dev_dbg(dev, "Mapped CXL Memory Device resource\n");
> >  	return cxlm;
> > @@ -1088,6 +1118,188 @@ static int cxl_mem_add_memdev(struct cxl_mem *cxlm)
> >  	return rc;
> >  }
> >  
> > +struct cxl_mbox_get_log {
> > +	uuid_t uuid;
> > +	__le32 offset;
> > +	__le32 length;
> > +} __packed;
> > +
> > +static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out)
> > +{
> > +	u32 remaining = size;
> > +	u32 offset = 0;
> > +
> > +	while (remaining) {
> > +		u32 xfer_size = min_t(u32, remaining, cxlm->payload_size);
> > +		struct cxl_mbox_get_log log = {
> > +			.uuid = *uuid,
> > +			.offset = cpu_to_le32(offset),
> > +			.length = cpu_to_le32(xfer_size)
> > +		};
> > +		struct mbox_cmd mbox_cmd = {
> > +			.opcode = CXL_MBOX_OP_GET_LOG,
> > +			.payload_in = &log,
> > +			.payload_out = out,
> > +			.size_in = sizeof(log),
> > +		};
> > +		int rc;
> > +
> > +		rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
> > +		if (rc)
> > +			return rc;
> > +
> > +		WARN_ON(mbox_cmd.size_out != xfer_size);
> 
> Just for completeness (as already addressed in one of Ben's replies
> to earlier patch) this is missing handling for the return code.
> 
> > +
> > +		out += xfer_size;
> > +		remaining -= xfer_size;
> > +		offset += xfer_size;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
> > +{
> > +	struct cxl_mem_command *c;
> > +
> > +	cxl_for_each_cmd(c)
> > +		if (c->opcode == opcode)
> > +			return c;
> > +
> > +	return NULL;
> > +}
> > +
> > +static void cxl_enable_cmd(struct cxl_mem *cxlm,
> > +			   const struct cxl_mem_command *cmd)
> > +{
> > +	if (test_and_set_bit(cmd->info.id, cxlm->enabled_cmds))
> > +		dev_WARN_ONCE(&cxlm->pdev->dev, true, "cmd enabled twice\n");
> > +}
> > +
> > +/**
> > + * cxl_walk_cel() - Walk through the Command Effects Log.
> > + * @cxlm: Device.
> > + * @size: Length of the Command Effects Log.
> > + * @cel: CEL
> > + *
> > + * Iterate over each entry in the CEL and determine if the driver supports the
> > + * command. If so, the command is enabled for the device and can be used later.
> > + */
> > +static void cxl_walk_cel(struct cxl_mem *cxlm, size_t size, u8 *cel)
> > +{
> > +	struct cel_entry {
> > +		__le16 opcode;
> > +		__le16 effect;
> > +	} *cel_entry;
> 
> Driver is currently marking a bunch of other structures packed that don't
> need it. Perhaps do this one as well for consistency?
> 

Just for my memory later...
I don't actually recall the history here. I had no intention originally to use
__packed, but they just kind of got in there, and it doesn't really hurt so
we've left them.

There are a few CXL structures which need packed (which is unfortunate), but
this isn't one of them.

> > +	const int cel_entries = size / sizeof(*cel_entry);
> > +	int i;
> > +
> > +	cel_entry = (struct cel_entry *)cel;
> > +
> > +	for (i = 0; i < cel_entries; i++) {
> > +		const struct cel_entry *ce = &cel_entry[i];
> 
> Given ce is only ever used to get the ce->opcode maybe better using that
> as the local variable?
> 
> 		u16 opcode = le16_to_cpu(cel_entry[i].opcode)
> 
> Obviously that might change depending on later patches though.
> 

Thanks. I did this and got rid of the const below and was able to remove the
line split below.

You'll learn I'm a little const-happy.

> 
> > +		const struct cxl_mem_command *cmd =
> > +			cxl_mem_find_command(le16_to_cpu(ce->opcode));
> > +
> > +		if (!cmd) {
> > +			dev_dbg(&cxlm->pdev->dev, "Unsupported opcode 0x%04x",
> 
> Unsupported by who? (driver rather than hardware)
> 
> > +				le16_to_cpu(ce->opcode));
> > +			continue;
> > +		}
> > +
> > +		cxl_enable_cmd(cxlm, cmd);
> > +	}
> > +}
> > +
> > +/**
> > + * cxl_mem_enumerate_cmds() - Enumerate commands for a device.
> > + * @cxlm: The device.
> > + *
> > + * Returns 0 if enumerate completed successfully.
> > + *
> > + * CXL devices have optional support for certain commands. This function will
> > + * determine the set of supported commands for the hardware and update the
> > + * enabled_cmds bitmap in the @cxlm.
> > + */
> > +static int cxl_mem_enumerate_cmds(struct cxl_mem *cxlm)
> > +{
> > +	struct device *dev = &cxlm->pdev->dev;
> > +	struct cxl_mbox_get_supported_logs {
> > +		__le16 entries;
> > +		u8 rsvd[6];
> > +		struct gsl_entry {
> > +			uuid_t uuid;
> > +			__le32 size;
> > +		} __packed entry[2];
> > +	} __packed gsl;
> > +	struct mbox_cmd mbox_cmd = {
> > +		.opcode = CXL_MBOX_OP_GET_SUPPORTED_LOGS,
> > +		.payload_out = &gsl,
> > +		.size_in = 0,
> > +	};
> > +	int i, rc;
> > +
> > +	rc = cxl_mem_mbox_get(cxlm);
> > +	if (rc)
> > +		return rc;
> > +
> > +	rc = cxl_mem_mbox_send_cmd(cxlm, &mbox_cmd);
> > +	if (rc)
> > +		goto out;
> > +
> > +	if (mbox_cmd.return_code != CXL_MBOX_SUCCESS) {
> > +		rc = -ENXIO;
> > +		goto out;
> > +	}
> > +
> > +	if (mbox_cmd.size_out > sizeof(gsl)) {
> > +		dev_warn(dev, "%zu excess logs\n",
> > +			 (mbox_cmd.size_out - sizeof(gsl)) /
> > +				 sizeof(struct gsl_entry));
> 
> This could well happen given spec seems to allow for other
> entries defined by other specs.

Interesting. When I read the spec before (multiple times) I was certain it said
other UUIDs aren't allowed. You're correct though that the way it is worded,
this is a bad check. AIUI, the spec permits any UUID and as such I think we
should remove tainting for unknown UUIDs. Let me put the exact words:

Table 169 & 170
"Log Identifier: UUID representing the log to retrieve data for. The following
 Log Identifier UUIDs are defined in this specification"

To me this implies UUIDs from other (not "this") specifications are permitted.

Dan, I'd like your opinion here. I'm tempted to change the current WARN to a
dev_dbg or somesuch.

> 
> Note that it's this path that I mentioned earlier as requiring we sanity
> check the output size available before calling mempcy_fromio into it
> with the hardware supported size.

Since posting, I've already reworked this somewhat based on the other changes
and it should be safe now.


> 
> 
> > +	}
> > +
> > +	for (i = 0; i < le16_to_cpu(gsl.entries); i++) {
> > +		u32 size = le32_to_cpu(gsl.entry[i].size);
> > +		uuid_t uuid = gsl.entry[i].uuid;
> > +		u8 *log;
> > +
> > +		dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size);
> > +
> > +		if (!uuid_equal(&uuid, &log_uuid[CEL_UUID]))
> > +			continue;
> > +
> > +		/*
> > +		 * It's a hardware bug if the log size is less than the input
> > +		 * payload size because there are many mandatory commands.
> > +		 */
> > +		if (sizeof(struct cxl_mbox_get_log) > size) {
> 
> If you are going to talk about less than in the comment, I'd flip the condition
> around so it lines up. Trivial obviously but nice to tidy up.
> 
> > +			dev_err(dev, "CEL log size reported was too small (%d)",
> > +				size);
> > +			rc = -ENOMEM;
> > +			goto out;
> > +		}
> > +
> > +		log = kvmalloc(size, GFP_KERNEL);
> > +		if (!log) {
> > +			rc = -ENOMEM;
> > +			goto out;
> > +		}
> > +
> > +		rc = cxl_xfer_log(cxlm, &uuid, size, log);
> > +		if (rc) {
> > +			kvfree(log);
> > +			goto out;
> > +		}
> > +
> > +		cxl_walk_cel(cxlm, size, log);
> > +		kvfree(log);
> > +	}
> > +
> > +out:
> > +	cxl_mem_mbox_put(cxlm);
> > +	return rc;
> > +}
> > +
> >  /**
> >   * cxl_mem_identify() - Send the IDENTIFY command to the device.
> >   * @cxlm: The device to identify.
> > @@ -1211,6 +1423,10 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> >  	if (rc)
> >  		return rc;
> >  
> > +	rc = cxl_mem_enumerate_cmds(cxlm);
> > +	if (rc)
> > +		return rc;
> > +
> >  	rc = cxl_mem_identify(cxlm);
> >  	if (rc)
> >  		return rc;
> > diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
> > index 72d1eb601a5d..c5e75b9dad9d 100644
> > --- a/include/uapi/linux/cxl_mem.h
> > +++ b/include/uapi/linux/cxl_mem.h
> > @@ -23,6 +23,7 @@
> >  	___C(INVALID, "Invalid Command"),                                 \
> >  	___C(IDENTIFY, "Identify Command"),                               \
> >  	___C(RAW, "Raw device command"),                                  \
> > +	___C(GET_SUPPORTED_LOGS, "Get Supported Logs"),                   \
> >  	___C(MAX, "Last command")
> >  
> >  #define ___C(a, b) CXL_MEM_COMMAND_ID_##a
>