Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
To:     Rob Herring <robh+dt@kernel.org>,
        Thierry Reding <thierry.reding@gmail.com>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>, Lee Jones <lee.jones@linaro.org>
Cc:     devicetree@vger.kernel.org, linux-pwm@vger.kernel.org,
        punit1.agrawal@toshiba.co.jp, yuji2.ishikawa@toshiba.co.jp,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Subject: [PATCH v2 0/2] pwm: visconti: Add Toshiba Visconti SoC PWM support
Date:   Fri, 12 Feb 2021 22:19:08 +0900
Message-Id: <20210212131910.557581-1-nobuhiro1.iwamatsu@toshiba.co.jp>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series is the PWM driver for Toshiba's ARM SoC, Visconti[0].
This provides DT binding documentation and device driver.

[0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html

Updates:

  dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller
    v1 -> v2:
      - Change SPDX-License-Identifier to GPL-2.0-only OR BSD-2-Clause.
      - Set compatible toshiba,pwm-visconti only.
      - Drop unnecessary comments.

  pwm: visconti: Add Toshiba Visconti SoC PWM support
    v1 -> v2:
      - Change SPDX-License-Identifier to GPL-2.0-only.
      - Add prefix for the register defines.
      - Drop struct device from struct visconti_pwm_chip.
      - Use '>>' instead of '/'.
      - Drop error message by devm_platform_ioremap_resource().
      - Use dev_err_probe instead of dev_err.
      - Change dev_info to dev_dbg.
      - Remove some empty lines.
      - Fix MODULE_ALIAS to platform:pwm-visconti.
      - Add .get_state() function.
      - Use the author name and email address to MODULE_AUTHOR.
      - Add more comment to function of the hardware.
      - Support .get_status() function.
      - Use NSEC_PER_USEC instead of 1000.
      - Alphabetically sorted for Makefile and Kconfig.
      - Added check for set value in visconti_pwm_apply().

Nobuhiro Iwamatsu (2):
  dt-bindings: pwm: Add bindings for Toshiba Visconti PWM Controller
  pwm: visconti: Add Toshiba Visconti SoC PWM support

 .../bindings/pwm/toshiba,pwm-visconti.yaml    |  43 +++++
 drivers/pwm/Kconfig                           |   9 +
 drivers/pwm/Makefile                          |   1 +
 drivers/pwm/pwm-visconti.c                    | 173 ++++++++++++++++++
 4 files changed, 226 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml
 create mode 100644 drivers/pwm/pwm-visconti.c

-- 
2.30.0.rc2