Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Sun, 14 Feb 2021 08:23:25 +0200
From:   Leon Romanovsky <leon@kernel.org>
To:     Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc:     "David S . Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Giuseppe Cavallaro <peppe.cavallaro@st.com>,
        Alexandre Torgue <alexandre.torgue@st.com>,
        Jose Abreu <joabreu@synopsys.com>, devicetree@vger.kernel.org,
        netdev@vger.kernel.org, punit1.agrawal@toshiba.co.jp,
        yuji2.ishikawa@toshiba.co.jp, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/4] net: stmmac: Add Toshiba Visconti SoCs glue driver
Message-ID: <YCjB3btP5+h4pISJ@unreal>
References: <20210212025806.556217-1-nobuhiro1.iwamatsu@toshiba.co.jp>
 <20210212025806.556217-3-nobuhiro1.iwamatsu@toshiba.co.jp>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210212025806.556217-3-nobuhiro1.iwamatsu@toshiba.co.jp>
Precedence: bulk

On Fri, Feb 12, 2021 at 11:58:04AM +0900, Nobuhiro Iwamatsu wrote:
> Add dwmac-visconti to the stmmac driver in Toshiba Visconti ARM SoCs.
> This patch contains only the basic function of the device. There is no
> clock control, PM, etc. yet. These will be added in the future.
>
> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
> ---
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |   8 +
>  drivers/net/ethernet/stmicro/stmmac/Makefile  |   1 +
>  .../ethernet/stmicro/stmmac/dwmac-visconti.c  | 288 ++++++++++++++++++
>  3 files changed, 297 insertions(+)
>  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 53f14c5a9e02..55ba67a550b9 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -219,6 +219,14 @@ config DWMAC_INTEL_PLAT
>  	  This selects the Intel platform specific glue layer support for
>  	  the stmmac device driver. This driver is used for the Intel Keem Bay
>  	  SoC.
> +
> +config DWMAC_VISCONTI
> +	bool "Toshiba Visconti DWMAC support"
> +	def_bool y

Doesn't it need to be "default y"?

Thanks

> +	depends on OF && COMMON_CLK && (ARCH_VISCONTI || COMPILE_TEST)
> +	help
> +	  Support for ethernet controller on Visconti SoCs.
> +
>  endif