Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20210214175211.105107-1-jagan@amarulasolutions.com>
In-Reply-To: <20210214175211.105107-1-jagan@amarulasolutions.com>
From:   Robert Foss <robert.foss@linaro.org>
Date:   Mon, 15 Feb 2021 12:58:07 +0100
Message-ID: <CAG3jFysAq0rSVRgjDSu6gF4kHcqOGAZt+b0Rz_reHgQr3Scy6A@mail.gmail.com>
Subject: Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for
 Chipone ICN6211
To:     Jagan Teki <jagan@amarulasolutions.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Andrzej Hajda <a.hajda@samsung.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@siol.net>,
        Sam Ravnborg <sam@ravnborg.org>,
        dri-devel <dri-devel@lists.freedesktop.org>,
        linux-kernel <linux-kernel@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>, linux-amarula@amarulasolutions.com
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hey Jagan,

Thanks for submitting this.

checkpatch.pl threw some typ-o warnings, and I listed them below. I
think either spelling is correct, but 'spelling.txt' does list this as
a typ-o explicitly, so I would suggest conforming to that just to
silence the checkpatch warning.

This patch also passes 'dt_binding_check' and 'dtbs_check', but I
think I'd like to defer to Rob Herring for an actual r-b.

On Sun, 14 Feb 2021 at 18:55, Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
>
> It has a flexible configuration of MIPI DSI signal input and
> produce RGB565, RGB666, RGB888 output format.
>
> Add dt-bingings for it.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
> Changes for v3:
> - updated to new dt-bindings style
>
>  .../display/bridge/chipone,icn6211.yaml       | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> new file mode 100644
> index 000000000000..13764f13fe46
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge

$ scripts/checkpatch.pl --git HEAD~0
WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#7:
ICN6211 is MIPI-DSI to RGB Convertor bridge from Chipone.
                           ^^^^^^^^^

> +
> +maintainers:
> +  - Jagan Teki <jagan@amarulasolutions.com>
> +
> +description: |
> +  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.

WARNING: 'Convertor' may be misspelled - perhaps 'Converter'?
#38: FILE: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml:13:
+  ICN6211 is MIPI-DSI to RGB Convertor bridge from chipone.
                              ^^^^^^^^^


> +
> +  It has a flexible configuration of MIPI DSI signal input and
> +  produce RGB565, RGB666, RGB888 output format.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - chipone,icn6211
> +
> +  reg:
> +    maxItems: 1
> +    description: virtual channel number of a DSI peripheral
> +
> +  reset-gpios:
> +    description: GPIO connected for the reset pin
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DSI input
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Video port for MIPI DPI output (panel or connector).
> +
> +    required:
> +      - port@0
> +      - port@1
> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - ports
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      bridge@0 {
> +        compatible = "chipone,icn6211";
> +        reg = <0>;
> +        reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
> +
> +        ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          bridge_in: port@0 {
> +            reg = <0>;
> +
> +            bridge_out_dsi: endpoint {
> +              remote-endpoint = <&dsi_out_bridge>;
> +            };
> +          };
> +
> +          bridge_out: port@1 {
> +            reg = <1>;
> +
> +            bridge_out_panel: endpoint {
> +              remote-endpoint = <&panel_out_bridge>;
> +            };
> +          };
> +        };
> +      };
> +    };
> --
> 2.25.1
>