Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1030393AbWI0RCp (ORCPT ); Wed, 27 Sep 2006 13:02:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1030276AbWI0RAd (ORCPT ); Wed, 27 Sep 2006 13:00:33 -0400 Received: from nat-132.atmel.no ([80.232.32.132]:30719 "EHLO relay.atmel.no") by vger.kernel.org with ESMTP id S1030250AbWI0Q7v (ORCPT ); Wed, 27 Sep 2006 12:59:51 -0400 From: Haavard Skinnemoen To: Andrew Victor Cc: Russell King , linux-kernel@vger.kernel.org, hskinnemoen@atmel.com Subject: [PATCH 3/8] at91_serial -> atmel_serial: Kconfig symbols Reply-To: Haavard Skinnemoen Date: Wed, 27 Sep 2006 18:58:00 +0200 Message-Id: <11593762851735-git-send-email-hskinnemoen@atmel.com> X-Mailer: git-send-email 1.4.1.1 In-Reply-To: <11593762852168-git-send-email-hskinnemoen@atmel.com> References: <1159376285670-git-send-email-hskinnemoen@atmel.com> <115937628584-git-send-email-hskinnemoen@atmel.com> <11593762852168-git-send-email-hskinnemoen@atmel.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11078 Lines: 317 Rename the following Kconfig symbols: * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT Signed-off-by: Haavard Skinnemoen --- arch/arm/configs/at91rm9200dk_defconfig | 6 +++--- arch/arm/configs/at91rm9200ek_defconfig | 6 +++--- arch/arm/configs/ateb9200_defconfig | 6 +++--- arch/arm/configs/carmeva_defconfig | 4 ++-- arch/arm/configs/csb337_defconfig | 6 +++--- arch/arm/configs/csb637_defconfig | 6 +++--- arch/arm/configs/kafa_defconfig | 6 +++--- arch/arm/configs/kb9202_defconfig | 4 ++-- arch/arm/configs/onearm_defconfig | 6 +++--- arch/arm/mach-at91rm9200/devices.c | 2 +- arch/avr32/configs/atstk1002_defconfig | 6 +++--- drivers/serial/Kconfig | 14 +++++++------- drivers/serial/Makefile | 2 +- drivers/serial/atmel_serial.c | 6 +++--- include/asm-arm/mach/serial_at91.h | 2 +- include/asm-avr32/mach/serial_at91.h | 2 +- 16 files changed, 42 insertions(+), 42 deletions(-) diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 4f3d8d3..c82e466 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -553,9 +553,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index 08b5dc3..b983fc5 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -534,9 +534,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index bee7813..15e6b0b 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -656,9 +656,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig index 8a075c8..d24ae87 100644 --- a/arch/arm/configs/carmeva_defconfig +++ b/arch/arm/configs/carmeva_defconfig @@ -455,8 +455,8 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index cf3fa5c..a2d6fd3 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 640d70c..2a1ac6c 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -591,9 +591,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 1db633e..54fcd75 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -536,9 +536,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig index 45396e0..b4cd4b4 100644 --- a/arch/arm/configs/kb9202_defconfig +++ b/arch/arm/configs/kb9202_defconfig @@ -418,8 +418,8 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 6a93e3a..cb1d94f 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -583,9 +583,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 4352acb..467ef6d 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -544,7 +544,7 @@ #endif * UART * -------------------------------------------------------------------- */ -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) static struct resource dbgu_resources[] = { [0] = { .start = AT91_VA_BASE_SYS + AT91_DBGU, diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 1d22255..6c2c5e0 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -385,9 +385,9 @@ # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_AT91=y -CONFIG_SERIAL_AT91_CONSOLE=y -# CONFIG_SERIAL_AT91_TTYAT is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 5b48ac2..4f962de 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -299,17 +299,17 @@ config SERIAL_AMBA_PL011_CONSOLE your boot loader (lilo or loadlin) about how to pass options to the kernel at boot time.) -config SERIAL_AT91 - bool "AT91RM9200 / AT91SAM9261 serial port support" +config SERIAL_ATMEL + bool "AT91 / AT32 on-chip serial port support" depends on ARM && (ARCH_AT91RM9200 || ARCH_AT91SAM9261) select SERIAL_CORE help This enables the driver for the on-chip UARTs of the Atmel AT91RM9200 and AT91SAM926 processor. -config SERIAL_AT91_CONSOLE - bool "Support for console on AT91RM9200 / AT91SAM9261 serial port" - depends on SERIAL_AT91=y +config SERIAL_ATMEL_CONSOLE + bool "Support for console on AT91 / AT32 serial port" + depends on SERIAL_ATMEL=y select SERIAL_CORE_CONSOLE help Say Y here if you wish to use a UART on the Atmel AT91RM9200 or @@ -317,9 +317,9 @@ config SERIAL_AT91_CONSOLE which receives all kernel messages and warnings and which allows logins in single user mode). -config SERIAL_AT91_TTYAT +config SERIAL_ATMEL_TTYAT bool "Install as device ttyAT0-4 instead of ttyS0-4" - depends on SERIAL_AT91=y + depends on SERIAL_ATMEL=y help Say Y here if you wish to have the five internal AT91RM9200 UARTs appear as /dev/ttyAT0-4 (major 204, minor 154-158) instead of the diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index e49808a..b4d8a7c 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -54,5 +54,5 @@ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9 obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o -obj-$(CONFIG_SERIAL_AT91) += atmel_serial.o +obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o obj-$(CONFIG_SERIAL_NETX) += netx-serial.o diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 49a3c7c..e33caa9 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -44,13 +44,13 @@ #include #include "atmel_serial.h" -#if defined(CONFIG_SERIAL_AT91_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif #include -#ifdef CONFIG_SERIAL_AT91_TTYAT +#ifdef CONFIG_SERIAL_ATMEL_TTYAT /* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we * should coexist with the 8250 driver, such as if we have an external 16C550 @@ -726,7 +726,7 @@ void __init at91_register_uart_fns(struc } -#ifdef CONFIG_SERIAL_AT91_CONSOLE +#ifdef CONFIG_SERIAL_ATMEL_CONSOLE static void at91_console_putchar(struct uart_port *port, int ch) { while (!(UART_GET_CSR(port) & AT91_US_TXRDY)) diff --git a/include/asm-arm/mach/serial_at91.h b/include/asm-arm/mach/serial_at91.h index 1290bb3..239e1f6 100644 --- a/include/asm-arm/mach/serial_at91.h +++ b/include/asm-arm/mach/serial_at91.h @@ -24,7 +24,7 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) diff --git a/include/asm-avr32/mach/serial_at91.h b/include/asm-avr32/mach/serial_at91.h index 1290bb3..239e1f6 100644 --- a/include/asm-avr32/mach/serial_at91.h +++ b/include/asm-avr32/mach/serial_at91.h @@ -24,7 +24,7 @@ struct at91_port_fns { void (*close)(struct uart_port *); }; -#if defined(CONFIG_SERIAL_AT91) +#if defined(CONFIG_SERIAL_ATMEL) void at91_register_uart_fns(struct at91_port_fns *fns); #else #define at91_register_uart_fns(fns) do { } while (0) -- 1.4.1.1 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/