Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 24 Feb 2021 15:10:13 +0100
From:   Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>
To:     Jianjun Wang <jianjun.wang@mediatek.com>
Cc:     Bjorn Helgaas <helgaas@kernel.org>,
        Rob Herring <robh+dt@kernel.org>, maz@kernel.org,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Ryder Lee <ryder.lee@mediatek.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        linux-pci@vger.kernel.org, linux-mediatek@lists.infradead.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        Sj Huang <sj.huang@mediatek.com>, youlin.pei@mediatek.com,
        chuanjia.liu@mediatek.com, qizhong.cheng@mediatek.com,
        sin_jieyang@mediatek.com, drinkcat@chromium.org,
        Rex-BC.Chen@mediatek.com, anson.chuang@mediatek.com
Subject: Re: [v8,6/7] PCI: mediatek-gen3: Add system PM support
Message-ID: <YDZeRc6CHV/WzyCm@rocinante>
References: <20210224061132.26526-1-jianjun.wang@mediatek.com>
 <20210224061132.26526-7-jianjun.wang@mediatek.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20210224061132.26526-7-jianjun.wang@mediatek.com>
Precedence: bulk

Hi Jianjun,

> Add suspend_noirq and resume_noirq callback functions to implement
> PM system suspend hooks for MediaTek Gen3 PCIe controller.

So, "systems suspend" and "resume" hooks, correct?

> When system suspend, trigger the PCIe link to L2 state and pull down

It probably would be "the system suspends".

[...]
> When system resum, the PCIe link should be re-established and the
> related control register values should be restored.

Similarly to the above: "the system resumes".

[...]
> +	if (err) {
> +		dev_err(port->dev, "can not enter L2 state\n");
> +		return err;
> +	}

Most likely you want "cannot" or "can't" in the above error message.

> +	/* Pull down the PERST# pin */
> +	val = readl_relaxed(port->base + PCIE_RST_CTRL_REG);
> +	val |= PCIE_PE_RSTB;
> +	writel_relaxed(val, port->base + PCIE_RST_CTRL_REG);
> +
> +	dev_dbg(port->dev, "enter L2 state success");

Just a nitpick.  What about "entered L2 states successfully"?

[...]
> +	if (err) {
> +		dev_err(port->dev, "resume failed\n");
> +		return err;
> +	}

This error message does not quite convey that the mtk_pcie_startup_port()
was the function that failed, which is only a part of what you have to do
to successfully resume.

> +	dev_dbg(port->dev, "resume done\n");

A nitpick.  Probably not needed, as lack of error message would mean
that the device resumed successfully after being suspended.

Krzysztof