Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932156AbWI2N57 (ORCPT ); Fri, 29 Sep 2006 09:57:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932160AbWI2N57 (ORCPT ); Fri, 29 Sep 2006 09:57:59 -0400 Received: from smtp.ono.com ([62.42.230.12]:52983 "EHLO resmta03.ono.com") by vger.kernel.org with ESMTP id S932156AbWI2N54 (ORCPT ); Fri, 29 Sep 2006 09:57:56 -0400 Date: Fri, 29 Sep 2006 15:57:38 +0200 From: "J.A. =?UTF-8?B?TWFnYWxsw7Nu?=" To: Andrew Morton , "Linux-Kernel, " , linux-scsi@vger.kernel.org Subject: Re: 2.6.18-mm2 Message-ID: <20060929155738.7076f0c8@werewolf> In-Reply-To: <20060928014623.ccc9b885.akpm@osdl.org> References: <20060928014623.ccc9b885.akpm@osdl.org> X-Mailer: Sylpheed-Claws 2.5.2cvs12 (GTK+ 2.10.3; i686-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15197 Lines: 347 On Thu, 28 Sep 2006 01:46:23 -0700, Andrew Morton wrote: > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.18/2.6.18-mm2/ > > aic7xxx oopses on boot: PCI: Setting latency timer of device 0000:00:0e.0 to 64 IRQ handler type mismatch for IRQ 0 [] setup_irq+0xb7/0x1b0 [] ahc_linux_isr+0x0/0x50 [] request_irq+0xa3/0xc0 [] ahc_pci_map_int+0x2c/0x50 [] ahc_pci_config+0x5ea/0xcf0 [] pci_bus_write_config_byte+0x30/0x70 [] ahc_linux_pci_dev_probe+0xec/0x1e0 [] sysfs_dirent_exist+0x45/0x70 [] sysfs_create_link+0x7b/0x180 [] pci_match_device+0x13/0xd0 [] kobject_get+0xf/0x20 [] pci_device_probe+0x56/0x80 [] really_probe+0x3b/0xe0 [] driver_probe_device+0x3f/0xa0 [] klist_next+0x53/0xa0 [] __driver_attach+0x7a/0x80 [] bus_for_each_dev+0x3a/0x60 [] driver_attach+0x16/0x20 [] __driver_attach+0x0/0x80 [] bus_add_driver+0x7c/0x1a0 [] __pci_register_driver+0x65/0x90 [] ahc_linux_init+0x79/0x90 [] init+0x120/0x330 [] ret_from_fork+0x6/0x1c [] init+0x0/0x330 [] init+0x0/0x330 [] kernel_thread_helper+0x7/0x14 ======================= aic7xxx: probe of 0000:00:0e.0 failed with error -16 lspci: leda:~# lspci 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 00:0d.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) 00:0e.0 SCSI storage controller: Adaptec AHA-2940U2/U2W / 7890/7891 (rev 01) 00:0f.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 64) 00:12.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 00:12.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) (the 2940 is onboard and the U160 is a PCI card). Full dmesg follows: Linux version 2.6.18-jam02 (root@rescue) (gcc version 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP Fri Sep 29 12:31:45 CEST 2006 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000001ff00000 end: 0000000020000000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2 copy_e820_map() start: 00000000fffc0000 size: 0000000000040000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 000fb4c0 Entering add_active_range(0, 0, 131072) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131072 HighMem 131072 -> 131072 early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125984 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.1 present. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: 440BX APIC at: 0xFEE00000 Processor #0 6:7 APIC version 17 Processor #1 6:7 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Detected 501.164 MHz processor. Built 1 zonelists. Total pages: 130048 Kernel command line: vga=6 root=/dev/sda1 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x60 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 515792k/524288k available (2111k kernel code, 8076k reserved, 845k data, 204k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) .init : 0xc03ea000 - 0xc041d000 ( 204 kB) .data : 0xc030fe3a - 0xc03e33a4 ( 845 kB) .text : 0xc0100000 - 0xc030fe3a (2111 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1003.12 BogoMIPS (lpj=5015604) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 16k freed CPU0: Intel Pentium III (Katmai) stepping 03 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1002.31 BogoMIPS (lpj=5011557) CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 512K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 CPU1: Intel Pentium III (Katmai) stepping 03 Total of 2 processors activated (2005.43 BogoMIPS). ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=2850 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. SCSI subsystem initialized PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) * Found PM-Timer Bug on the chipset. Due to workarounds for a bug, * this clock source is slow. Consider trying other clock sources PCI quirk: region 0400-043f claimed by PIIX4 ACPI PCI quirk: region 0440-044f claimed by PIIX4 SMB PIIX4 devres B PIO at 0290-0297 Boot video device is 0000:01:00.0 PCI: Cannot allocate resource region 0 of device 0000:00:0e.0 PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: fca00000-feafffff PREFETCH window: e4800000-f48fffff NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 65536 bind 32768) TCP reno registered Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Limiting direct PCI/PCI transfers. Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi 0:0:0:0: Direct-Access IBM IC35L018UWD210-0 S5BS PQ: 0 ANSI: 3 scsi0:A:0:0: Tagged Queuing enabled. Depth 32 target0:0:0: Beginning Domain Validation target0:0:0: wide asynchronous target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) target0:0:0: Ending Domain Validation scsi 0:0:5:0: CD-ROM TOSHIBA CD-ROM XM-6401TA 1015 PQ: 0 ANSI: 2 target0:0:5: Beginning Domain Validation target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) target0:0:5: Domain Validation skipping write tests target0:0:5: Ending Domain Validation PCI: Enabling device 0000:00:0e.0 (0000 -> 0003) PCI: No IRQ known for interrupt pin A of device 0000:00:0e.0. Probably buggy MP table. PCI: Setting latency timer of device 0000:00:0e.0 to 64 IRQ handler type mismatch for IRQ 0 [] setup_irq+0xb7/0x1b0 [] ahc_linux_isr+0x0/0x50 [] request_irq+0xa3/0xc0 [] ahc_pci_map_int+0x2c/0x50 [] ahc_pci_config+0x5ea/0xcf0 [] pci_bus_write_config_byte+0x30/0x70 [] ahc_linux_pci_dev_probe+0xec/0x1e0 [] sysfs_dirent_exist+0x45/0x70 [] sysfs_create_link+0x7b/0x180 [] pci_match_device+0x13/0xd0 [] kobject_get+0xf/0x20 [] pci_device_probe+0x56/0x80 [] really_probe+0x3b/0xe0 [] driver_probe_device+0x3f/0xa0 [] klist_next+0x53/0xa0 [] __driver_attach+0x7a/0x80 [] bus_for_each_dev+0x3a/0x60 [] driver_attach+0x16/0x20 [] __driver_attach+0x0/0x80 [] bus_add_driver+0x7c/0x1a0 [] __pci_register_driver+0x65/0x90 [] ahc_linux_init+0x79/0x90 [] init+0x120/0x330 [] ret_from_fork+0x6/0x1c [] init+0x0/0x330 [] init+0x0/0x330 [] kernel_thread_helper+0x7/0x14 ======================= aic7xxx: probe of 0000:00:0e.0 failed with error -16 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) sda: Write Protect is off sda: Mode Sense: cb 00 00 08 SCSI device sda: drive cache: write through sda: sda1 sda2 < sda5 > sd 0:0:0:0: Attached scsi disk sda serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 input: AT Translated Set 2 keyboard as /class/input/input0 raid6: int32x1 95 MB/s logips2pp: Detected unknown logitech mouse model 1 raid6: int32x2 98 MB/s raid6: int32x4 114 MB/s raid6: int32x8 117 MB/s input: PS/2 Logitech Mouse as /class/input/input1 raid6: mmxx1 217 MB/s raid6: mmxx2 323 MB/s raid6: sse1x1 245 MB/s raid6: sse1x2 329 MB/s raid6: using algorithm sse1x2 (329 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1014.400 MB/sec raid5: using function: pIII_sse (1014.400 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. Time: tsc clocksource has been installed. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 204k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 9, io base 0x0000ef80 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.18-jam02 uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected sr0: scsi-1 drive Uniform CD-ROM driver Revision: 3.20 sr 0:0:5:0: Attached scsi CD-ROM sr0 EXT3 FS on sda1, internal journal libata version 2.00 loaded. ata_piix 0000:00:07.1: version 2.00ac7 ata1: PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14 ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15 scsi1 : ata_piix scsi2 : ata_piix ATA: abnormal status 0x7F on port 0x177 ATA: abnormal status 0x7F on port 0x177 ata2.00: ATAPI, max MWDMA0, CDB intr ata2.00: configured for PIO3 scsi 2:0:0:0: Direct-Access IOMEGA ZIP 250 51.G PQ: 0 ANSI: 5 sd 2:0:0:0: Attached scsi removable disk sdb Adding 1148608k swap on /dev/sda5. Priority:-1 extents:1 across:1148608k loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0f.0: 3Com PCI 3c905B Cyclone 100baseTx at e0804f80. eth0: setting full-duplex. nfsd: last server has exited nfsd: unexporting all filesystems Linux agpgart interface v0.101 (c) Dave Jones nvidia: module license 'NVIDIA' taints kernel. NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-9625 Thu Sep 14 15:33:21 PDT 2006 -- J.A. Magallon \ Software is like sex: \ It's better when it's free Mandriva Linux release 2007.0 (Cooker) for i586 Linux 2.6.18-jam02 (gcc 4.1.1 20060724 (prerelease) (4.1.1-3mdk)) #1 SMP PREEMPT - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/