Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422660AbWI2XxG (ORCPT ); Fri, 29 Sep 2006 19:53:06 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1422658AbWI2XxG (ORCPT ); Fri, 29 Sep 2006 19:53:06 -0400 Received: from iron.pdx.net ([207.149.241.18]:56277 "EHLO iron.pdx.net") by vger.kernel.org with ESMTP id S932295AbWI2XxC (ORCPT ); Fri, 29 Sep 2006 19:53:02 -0400 Subject: RE: [aacraid] Adaptec 2820SA Crash From: Sean Bruno To: "Salyzyn, Mark" Cc: linux-kernel@vger.kernel.org In-Reply-To: <547AF3BD0F3F0B4CBDC379BAC7E4189F02CE35B6@otce2k03.adaptec.com> References: <547AF3BD0F3F0B4CBDC379BAC7E4189F02CE35B6@otce2k03.adaptec.com> Content-Type: text/plain Date: Fri, 29 Sep 2006 16:53:01 -0700 Message-Id: <1159573981.3889.175.camel@home-desk> Mime-Version: 1.0 X-Mailer: Evolution 2.6.3 (2.6.3-1.fc5.5) Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11210 Lines: 260 Hmmmmmm....I don't seem to be able to post with the attachments. Here is the kernel panic/dump and some other information: The system in question is an ASUS M2N32WS motherboard running an Dual-Core Athlon64. The 2820SA was tested with firmware revisions 9194 and 8832. The running o/s is Fedora Core 6 Test 3 with their latest renditions of 2.6.18. I also compiled and tested vanilla 2.6.18 with the kernel configuration from Fedora's kernels. The driver version of aacraid reports as 1.1-5[2409]-mh2. udevd[541]: add_to_rules: invalid rule '/etc/udev/rules.d/50-udev.rules:153' Unable to handle kernel paging request at ffffc20010084044 RIP: [] :aacraid:aac_rkt_intr+0x1a/0x122 PGD 3fc1a067 PUD 3fc1b067 PMD 3fdf7067 PTE 0 Oops: 0000 [1] SMP last sysfs file: /class/net/lo/type CPU 0 Modules linked in: i2c_nforce2 ohci1394 i2c_core ieee1394 floppy aacraid pcspkrdPid: 743, comm: modprobe Not tainted 2.6.18-1.2693.fc6 #1 RIP: 0010:[] [] :aacraid:aac_rkt_intr+0x1a2RSP: 0018:ffffffff80716ef8 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff81003c61b138 RCX: ffffc20010084000 RDX: ffff81003d4af9e8 RSI: ffff81003bbe26d8 RDI: 00000000000000b1 RBP: ffffffff80716f08 R08: ffffffff80716f28 R09: 0000000000000001 R10: ffffffff802c238e R11: ffffffff806be440 R12: ffff81003bbe26d8 R13: 0000000000000000 R14: 00000000000000b1 R15: ffff81003d4af9e8 FS: 00002aaaaaab6240(0000) GS:ffffffff8069b000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffffc20010084044 CR3: 000000003ce1f000 CR4: 00000000000006e0 Process modprobe (pid: 743, threadinfo ffff81003d4ae000, task ffff81003ee510c0) Stack: ffff81003c61b138 0000000000000000 ffffffff80716f48 ffffffff80211475 ffffffff806be440 ffffffff806be400 000000000000b100 00000000000000b1 ffffffff806be440 ffff81003c61b138 ffffffff80716f88 ffffffff802c23f1 Call Trace: [] handle_IRQ_event+0x2c/0x64 [] __do_IRQ+0xaf/0x114 [] do_IRQ+0xf8/0x107 [] ret_from_intr+0x0/0xf DWARF2 unwinder stuck at ret_from_intr+0x0/0xf Leftover inexact backtrace: [] do_flush_tlb_all+0x0/0x87 [] on_each_cpu+0x2d/0x36 [] flush_tlb_all+0x1c/0x1e [] unmap_vm_area+0x1d4/0x276 [] init_level4_pgt+0xc20/0x1000 [] __remove_vm_area+0x2c/0x44 [] remove_vm_area+0x20/0x36 [] iounmap+0x8e/0xce [] :aacraid:aac_init_adapter+0xcc/0x674 [] :aacraid:aac_rkt_init+0x15d/0x250 [] :aacraid:aac_probe_one+0x209/0x4c6 [] pci_device_probe+0x106/0x186 [] default_wake_function+0x0/0xf [] driver_probe_device+0x5c/0xb1 [] __driver_attach+0x89/0xdb [] __driver_attach+0x0/0xdb [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x89/0x138 [] driver_register+0x8f/0x93 [] __pci_register_driver+0x63/0x85 [] :aacraid:aac_init+0x33/0x6e [] sys_init_module+0x1708/0x18cc [] __kmalloc+0x0/0x134 [] system_call+0x7e/0x83 Code: 8b 59 44 83 fb ff 75 0c 8b 59 44 83 fb ff 0f 84 ed 00 00 00 RIP [] :aacraid:aac_rkt_intr+0x1a/0x122 RSP CR2: ffffc20010084044 <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20 in_atomic():1, irqs_disabled():1 Call Trace: [] show_trace+0xae/0x336 [] dump_stack+0x15/0x17 [] __might_sleep+0xb2/0xb4 [] down_read+0x1d/0x4a [] blocking_notifier_call_chain+0x1b/0x41 [] profile_task_exit+0x15/0x17 [] do_exit+0x24/0x911 [] do_page_fault+0x7ba/0x842 [] error_exit+0x0/0x96 DWARF2 unwinder stuck at error_exit+0x0/0x96 Leftover inexact backtrace: [] __do_IRQ+0x4c/0x114 [] :aacraid:aac_rkt_intr+0x1a/0x122 [] handle_IRQ_event+0x2c/0x64 [] __do_IRQ+0xaf/0x114 [] do_flush_tlb_all+0x0/0x87 [] do_IRQ+0xf8/0x107 [] ret_from_intr+0x0/0xf [] do_flush_tlb_all+0x0/0x87 [] on_each_cpu+0x2d/0x36 [] flush_tlb_all+0x1c/0x1e [] unmap_vm_area+0x1d4/0x276 [] init_level4_pgt+0xc20/0x1000 [] __remove_vm_area+0x2c/0x44 [] remove_vm_area+0x20/0x36 [] iounmap+0x8e/0xce [] :aacraid:aac_init_adapter+0xcc/0x674 [] :aacraid:aac_rkt_init+0x15d/0x250 [] :aacraid:aac_probe_one+0x209/0x4c6 [] pci_device_probe+0x106/0x186 [] default_wake_function+0x0/0xf [] driver_probe_device+0x5c/0xb1 [] __driver_attach+0x89/0xdb [] __driver_attach+0x0/0xdb [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x89/0x138 [] driver_register+0x8f/0x93 [] __pci_register_driver+0x63/0x85 [] :aacraid:aac_init+0x33/0x6e [] sys_init_module+0x1708/0x18cc [] __kmalloc+0x0/0x134 [] system_call+0x7e/0x83 BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted) Call Trace: [] show_trace+0xae/0x336 [] dump_stack+0x15/0x17 [] trace_hardirqs_on+0xbc/0x13d [] _spin_unlock_irq+0x2b/0x31 [] __down_read+0x3d/0xa1 [] down_read+0x46/0x4a [] blocking_notifier_call_chain+0x1b/0x41 [] profile_task_exit+0x15/0x17 [] do_exit+0x24/0x911 [] do_page_fault+0x7ba/0x842 [] error_exit+0x0/0x96 DWARF2 unwinder stuck at error_exit+0x0/0x96 Leftover inexact backtrace: [] __do_IRQ+0x4c/0x114 [] :aacraid:aac_rkt_intr+0x1a/0x122 [] handle_IRQ_event+0x2c/0x64 [] __do_IRQ+0xaf/0x114 [] do_flush_tlb_all+0x0/0x87 [] do_IRQ+0xf8/0x107 [] ret_from_intr+0x0/0xf [] do_flush_tlb_all+0x0/0x87 [] on_each_cpu+0x2d/0x36 [] flush_tlb_all+0x1c/0x1e [] unmap_vm_area+0x1d4/0x276 [] init_level4_pgt+0xc20/0x1000 [] __remove_vm_area+0x2c/0x44 [] remove_vm_area+0x20/0x36 [] iounmap+0x8e/0xce [] :aacraid:aac_init_adapter+0xcc/0x674 [] :aacraid:aac_rkt_init+0x15d/0x250 [] :aacraid:aac_probe_one+0x209/0x4c6 [] pci_device_probe+0x106/0x186 [] default_wake_function+0x0/0xf [] driver_probe_device+0x5c/0xb1 [] __driver_attach+0x89/0xdb [] __driver_attach+0x0/0xdb [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x89/0x138 [] driver_register+0x8f/0x93 [] __pci_register_driver+0x63/0x85 [] :aacraid:aac_init+0x33/0x6e [] sys_init_module+0x1708/0x18cc [] __kmalloc+0x0/0x134 [] system_call+0x7e/0x83 Kernel panic - not syncing: Aiee, killing interrupt handler! BUG: warning at kernel/panic.c:137/panic() (Not tainted) Call Trace: [] show_trace+0xae/0x336 [] dump_stack+0x15/0x17 [] panic+0x202/0x213 [] do_exit+0x95/0x911 [] do_page_fault+0x7ba/0x842 [] error_exit+0x0/0x96 DWARF2 unwinder stuck at error_exit+0x0/0x96 Leftover inexact backtrace: [] __do_IRQ+0x4c/0x114 [] :aacraid:aac_rkt_intr+0x1a/0x122 [] handle_IRQ_event+0x2c/0x64 [] __do_IRQ+0xaf/0x114 [] do_flush_tlb_all+0x0/0x87 [] do_IRQ+0xf8/0x107 [] ret_from_intr+0x0/0xf [] do_flush_tlb_all+0x0/0x87 [] on_each_cpu+0x2d/0x36 [] flush_tlb_all+0x1c/0x1e [] unmap_vm_area+0x1d4/0x276 [] init_level4_pgt+0xc20/0x1000 [] __remove_vm_area+0x2c/0x44 [] remove_vm_area+0x20/0x36 [] iounmap+0x8e/0xce [] :aacraid:aac_init_adapter+0xcc/0x674 [] :aacraid:aac_rkt_init+0x15d/0x250 [] :aacraid:aac_probe_one+0x209/0x4c6 [] pci_device_probe+0x106/0x186 [] default_wake_function+0x0/0xf [] driver_probe_device+0x5c/0xb1 [] __driver_attach+0x89/0xdb [] __driver_attach+0x0/0xdb [] bus_for_each_dev+0x49/0x7a [] driver_attach+0x1c/0x1e [] bus_add_driver+0x89/0x138 [] driver_register+0x8f/0x93 [] __pci_register_driver+0x63/0x85 [] :aacraid:aac_init+0x33/0x6e [] sys_init_module+0x1708/0x18cc [] __kmalloc+0x0/0x134 [] system_call+0x7e/0x83 On Thu, 2006-09-28 at 09:06 -0400, Salyzyn, Mark wrote: > I look forward to seeing them. > > Please report them to the scsi list as well. > > Sincerely -- Mark Salyzyn > > > -----Original Message----- > > From: linux-kernel-owner@vger.kernel.org > > [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Sean Bruno > > Sent: Wednesday, September 27, 2006 10:47 PM > > To: linux-kernel@vger.kernel.org > > Subject: [aacraid] Adaptec 2820SA Crash > > > > > > I noted that the aacraid module under 2.6.18 is crashing pretty hard > > under 2.6.18 > > > > Anyone working on that? I'll send more detail in the AM with serial > > console captures and dump information. > > > > Sean > > > > - > > To unsubscribe from this list: send the line "unsubscribe > > linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/