Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Received-SPF: Pass (protection.outlook.com: domain of leica-geosystems.com.cn
 designates 193.8.40.99 as permitted sender) receiver=protection.outlook.com;
 client-ip=193.8.40.99; helo=aherlnxbspsrv01.lgs-net.com;
From:   LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
To:     sre@kernel.org, robh+dt@kernel.org, pali@kernel.org,
        krzk@kernel.org, afd@ti.com, linux-pm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        sebastian.reichel@collabora.com
Cc:     grygorii.tertychnyi@leica-geosystems.com,
        andrey.zhizhikin@leica-geosystems.com,
        LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Subject: [PATCH V5 2/2] power: supply: bq27xxx: Add support for BQ78Z100
Date:   Fri,  5 Mar 2021 06:49:49 +0000
Message-Id: <20210305064949.2680-3-Qing-wu.Li@leica-geosystems.com.cn>
In-Reply-To: <20210305064949.2680-1-Qing-wu.Li@leica-geosystems.com.cn>
References: <20210305064949.2680-1-Qing-wu.Li@leica-geosystems.com.cn>
MIME-Version: 1.0
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 05 Mar 2021 06:50:00.0123
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 09903a6d-6e0d-46b6-9f7c-08d8dfa2e5bd
X-MS-Exchange-CrossTenant-Id: 1b16ab3e-b8f6-4fe3-9f3e-2db7fe549f6a
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=1b16ab3e-b8f6-4fe3-9f3e-2db7fe549f6a;Ip=[193.8.40.99];Helo=[aherlnxbspsrv01.lgs-net.com]
X-MS-Exchange-CrossTenant-AuthSource: HE1EUR02FT024.eop-EUR02.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: AM0PR06MB5906
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add support for TI BQ78Z100, I2C interface gas gauge.
It provides a fully integrated safety protection
and authentication for 1 to 2-series cell Li-Ion and
Li-Polymer battery packs.

The patch was tested with BQ78Z100 equipment.

Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
---
 drivers/power/supply/bq27xxx_battery.c     | 44 ++++++++++++++++++++++
 drivers/power/supply/bq27xxx_battery_i2c.c |  2 +
 include/linux/power/bq27xxx_battery.h      |  1 +
 3 files changed, 47 insertions(+)

diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
index 4c4a7b1c64c5..05a4f9190160 100644
--- a/drivers/power/supply/bq27xxx_battery.c
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -39,6 +39,7 @@
  * https://www.ti.com/product/bq27z561
  * https://www.ti.com/product/bq28z610
  * https://www.ti.com/product/bq34z100-g1
+ * https://www.ti.com/product/bq78z100
  */
 
 #include <linux/device.h>
@@ -515,6 +516,27 @@ static u8
 		[BQ27XXX_REG_DCAP] = 0x3c,
 		[BQ27XXX_REG_AP] = 0x22,
 		BQ27XXX_DM_REG_ROWS,
+	},
+	bq78z100_regs[BQ27XXX_REG_MAX] = {
+		[BQ27XXX_REG_CTRL] = 0x00,
+		[BQ27XXX_REG_TEMP] = 0x06,
+		[BQ27XXX_REG_INT_TEMP] = 0x28,
+		[BQ27XXX_REG_VOLT] = 0x08,
+		[BQ27XXX_REG_AI] = 0x14,
+		[BQ27XXX_REG_FLAGS] = 0x0a,
+		[BQ27XXX_REG_TTE] = 0x16,
+		[BQ27XXX_REG_TTF] = 0x18,
+		[BQ27XXX_REG_TTES] = 0x1c,
+		[BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_RC] = 0x10,
+		[BQ27XXX_REG_FCC] = 0x12,
+		[BQ27XXX_REG_CYCT] = 0x2a,
+		[BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+		[BQ27XXX_REG_SOC] = 0x2c,
+		[BQ27XXX_REG_DCAP] = 0x3c,
+		[BQ27XXX_REG_AP] = 0x22,
+		BQ27XXX_DM_REG_ROWS,
 	};
 
 static enum power_supply_property bq27000_props[] = {
@@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = {
 	POWER_SUPPLY_PROP_MANUFACTURER,
 };
 
+static enum power_supply_property bq78z100_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+	POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_CHARGE_FULL,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+	POWER_SUPPLY_PROP_CYCLE_COUNT,
+	POWER_SUPPLY_PROP_ENERGY_NOW,
+	POWER_SUPPLY_PROP_POWER_AVG,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
 struct bq27xxx_dm_reg {
 	u8 subclass_id;
 	u8 offset;
@@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
 #define bq27z561_dm_regs 0
 #define bq28z610_dm_regs 0
 #define bq34z100_dm_regs 0
+#define bq78z100_dm_regs 0
 
 #define BQ27XXX_O_ZERO		BIT(0)
 #define BQ27XXX_O_OTDC		BIT(1) /* has OTC/OTD overtemperature flags */
@@ -969,6 +1012,7 @@ static struct {
 	[BQ28Z610]  = BQ27XXX_DATA(bq28z610,  0         , BQ27Z561_O_BITS),
 	[BQ34Z100]  = BQ27XXX_DATA(bq34z100,  0         , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
 							  BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
+	[BQ78Z100]  = BQ27XXX_DATA(bq78z100,  0x00000000, BQ27Z561_O_BITS),
 };
 
 static DEFINE_MUTEX(bq27xxx_list_lock);
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
index eb4f4284982f..46f078350fd3 100644
--- a/drivers/power/supply/bq27xxx_battery_i2c.c
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27z561", BQ27Z561 },
 	{ "bq28z610", BQ28Z610 },
 	{ "bq34z100", BQ34Z100 },
+	{ "bq78z100", BQ78Z100 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
@@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
 	{ .compatible = "ti,bq27z561" },
 	{ .compatible = "ti,bq28z610" },
 	{ .compatible = "ti,bq34z100" },
+	{ .compatible = "ti,bq78z100" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 111a40d0d3d5..ac17618043b1 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -33,6 +33,7 @@ enum bq27xxx_chip {
 	BQ27Z561,
 	BQ28Z610,
 	BQ34Z100,
+	BQ78Z100,
 };
 
 struct bq27xxx_device_info;
-- 
2.17.1