Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH 1/8] gpio: Add Elba SoC gpio driver for spi cs control
To:     Brad Larson <brad@pensando.io>,
        linux-arm-kernel@lists.infradead.org
Cc:     arnd@arndb.de, linus.walleij@linaro.org, bgolaszewski@baylibre.com,
        broonie@kernel.org, fancer.lancer@gmail.com,
        adrian.hunter@intel.com, ulf.hansson@linaro.org, olof@lixom.net,
        linux-gpio@vger.kernel.org, linux-spi@vger.kernel.org,
        linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20210304034141.7062-1-brad@pensando.io>
 <20210304034141.7062-2-brad@pensando.io>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Message-ID: <605880ad-6c12-bf1d-45f8-ef70181e4eec@canonical.com>
Date:   Fri, 5 Mar 2021 12:25:39 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.7.1
MIME-Version: 1.0
In-Reply-To: <20210304034141.7062-2-brad@pensando.io>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 04/03/2021 04:41, Brad Larson wrote:
> This GPIO driver is for the Pensando Elba SoC which
> provides control of four chip selects on two SPI busses.
> 
> Signed-off-by: Brad Larson <brad@pensando.io>
> ---
>  drivers/gpio/Kconfig           |   6 ++
>  drivers/gpio/Makefile          |   1 +
>  drivers/gpio/gpio-elba-spics.c | 120 +++++++++++++++++++++++++++++++++
>  3 files changed, 127 insertions(+)
>  create mode 100644 drivers/gpio/gpio-elba-spics.c

(...)

> +static int elba_spics_probe(struct platform_device *pdev)
> +{
> +	struct elba_spics_priv *p;
> +	struct resource *res;
> +	int ret;
> +
> +	p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
> +	if (!p)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	p->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(p->base)) {
> +		dev_err(&pdev->dev, "failed to remap I/O memory\n");
> +		return PTR_ERR(p->base);
> +	}
> +	spin_lock_init(&p->lock);
> +	platform_set_drvdata(pdev, p);
> +
> +	p->chip.ngpio = 4;	/* 2 cs pins for spi0, and 2 for spi1 */
> +	p->chip.base = -1;
> +	p->chip.direction_input = elba_spics_direction_input;
> +	p->chip.direction_output = elba_spics_direction_output;
> +	p->chip.get = elba_spics_get_value;
> +	p->chip.set = elba_spics_set_value;
> +	p->chip.label = dev_name(&pdev->dev);
> +	p->chip.parent = &pdev->dev;
> +	p->chip.owner = THIS_MODULE;
> +
> +	ret = devm_gpiochip_add_data(&pdev->dev, &p->chip, p);
> +	if (ret) {
> +		dev_err(&pdev->dev, "unable to add gpio chip\n");
> +		return ret;
> +	}
> +
> +	dev_info(&pdev->dev, "elba spics registered\n");

Don't print trivial probe results, unless you print here something
useful. If you need it for debugging, keep it dev_dbg.

Best regards,
Krzysztof