Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v3 1/2] dt-bindings: display: bridge: Add bindings for
 SN65DSI83/84/85
To:     Jagan Teki <jagan@amarulasolutions.com>,
        Rob Herring <robh+dt@kernel.org>,
        Andrzej Hajda <a.hajda@samsung.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Jernej Skrabec <jernej.skrabec@siol.net>,
        Sam Ravnborg <sam@ravnborg.org>
Cc:     dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-amarula@amarulasolutions.com
References: <20210214174453.104616-1-jagan@amarulasolutions.com>
From:   Marek Vasut <marex@denx.de>
Message-ID: <be0fdd57-507d-0f9b-89db-65891531908c@denx.de>
Date:   Fri, 5 Mar 2021 22:43:40 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101
 Thunderbird/78.8.0
MIME-Version: 1.0
In-Reply-To: <20210214174453.104616-1-jagan@amarulasolutions.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 2/14/21 6:44 PM, Jagan Teki wrote:
> SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge
> controller IC's from Texas Instruments.
> 
> SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
> SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
> SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge

[...]

> +description: |
> +  SN65DSI83/84/85 devices are MIPI DSI to LVDS based bridge controller
> +  IC's from Texas Instruments.
> +
> +  SN65DSI83 - Single Channel DSI to Single-link LVDS bridge
> +  SN65DSI84 - Single Channel DSI to Dual-link LVDS bridge
> +  SN65DSI85 - Dual Channel DSI to Dual-link LVDS bridge

[...]

> +properties:
> +  compatible:
> +    enum:
> +      - ti,sn65dsi83
> +      - ti,sn65dsi84

DSI85 seems missing ?

> +  reg:
> +    const: 0x2c

I have the DSI83 device at 0x2d, so this cannot be const 0x2c ?

> +  enable-gpios:
> +    maxItems: 1
> +    description: GPIO specifier for bridge enable pin (active high).

The bridge can work without this GPIO, so its optional.

[...]

Also, Doug reported that vcc and vcore regulators should likely be 
listed, see feedback on:
[PATCH 1/2] dt-bindings: drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 bindings