Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>,
        Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Heiner Kallweit <hkallweit1@gmail.com>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, linux-imx@nxp.com,
        Fabio Estevam <festevam@gmail.com>,
        David Jander <david@protonic.nl>,
        Russell King <linux@armlinux.org.uk>,
        Philippe Schenker <philippe.schenker@toradex.com>
Subject: [PATCH v2 6/7] ARM: imx6sx: remove Atheros AR8031 PHY fixup
Date:   Tue,  9 Mar 2021 12:26:14 +0100
Message-Id: <20210309112615.625-7-o.rempel@pengutronix.de>
In-Reply-To: <20210309112615.625-1-o.rempel@pengutronix.de>
References: <20210309112615.625-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

If this patch breaks your system, enable AT803X_PHY driver and add a PHY
node to the board device tree:

	phy-connection-type = "rgmii-txid"; (or rgmii-id)
	ethernet-phy@X {
		reg = <0xX>;

		qca,clk-out-frequency = <125000000>;

		vddio-supply = <&vddh>;

		vddio: vddio-regulator {
			regulator-name = "VDDIO";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
		};

		vddh: vddh-regulator {
			regulator-name = "VDDH";
		};
	};

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-imx/mach-imx6sx.c | 26 --------------------------
 1 file changed, 26 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c
index 781e2a94fdd7..e65ed5218f53 100644
--- a/arch/arm/mach-imx/mach-imx6sx.c
+++ b/arch/arm/mach-imx/mach-imx6sx.c
@@ -15,31 +15,6 @@
 #include "common.h"
 #include "cpuidle.h"
 
-static int ar8031_phy_fixup(struct phy_device *dev)
-{
-	u16 val;
-
-	/* Set RGMII IO voltage to 1.8V */
-	phy_write(dev, 0x1d, 0x1f);
-	phy_write(dev, 0x1e, 0x8);
-
-	/* introduce tx clock delay */
-	phy_write(dev, 0x1d, 0x5);
-	val = phy_read(dev, 0x1e);
-	val |= 0x0100;
-	phy_write(dev, 0x1e, val);
-
-	return 0;
-}
-
-#define PHY_ID_AR8031   0x004dd074
-static void __init imx6sx_enet_phy_init(void)
-{
-	if (IS_BUILTIN(CONFIG_PHYLIB))
-		phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
-					   ar8031_phy_fixup);
-}
-
 static void __init imx6sx_enet_clk_sel(void)
 {
 	struct regmap *gpr;
@@ -57,7 +32,6 @@ static void __init imx6sx_enet_clk_sel(void)
 
 static inline void imx6sx_enet_init(void)
 {
-	imx6sx_enet_phy_init();
 	imx6sx_enet_clk_sel();
 }
 
-- 
2.29.2