Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965426AbWJBVnL (ORCPT ); Mon, 2 Oct 2006 17:43:11 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965424AbWJBVnL (ORCPT ); Mon, 2 Oct 2006 17:43:11 -0400 Received: from smtp11.poczta.interia.pl ([80.48.65.11]:32684 "EHLO smtp4.poczta.interia.pl") by vger.kernel.org with ESMTP id S965419AbWJBVnG (ORCPT ); Mon, 2 Oct 2006 17:43:06 -0400 Message-ID: <452188DA.6090000@interia.pl> Date: Mon, 02 Oct 2006 23:47:06 +0200 From: =?UTF-8?B?QXJrYWRpdXN6IEphxYJvd2llYw==?= User-Agent: Thunderbird 1.5.0.7 (Windows/20060909) MIME-Version: 1.0 To: Paolo Ornati , linux-kernel@vger.kernel.org, linux-usb-users@lists.sourceforge.net, stern@rowland.harvard.edu Subject: Re: [Linux-usb-users] PROBLEM: Kernel 2.6.x freeze References: <20060930141455.29fdadef@localhost> <20061001161020.20e941c6@localhost> In-Reply-To: <20061001161020.20e941c6@localhost> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit X-EMID: c9fbcacc Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20108 Lines: 432 Paolo Ornati wrote: > Another crazy theory (based on my horrible experience with a > defective memory module): > I don't know, but I think this theory is possibly :( > There is an hard to trigger single bit error not detected by memtest > near (physical) memory address 6b79f00(ESP) (where the EIP has been > retrived causing the Oops). > > In this case the physical address (at Kb 110055) can be skipped with > "memmap=1K$110055K" kernel boot option. > I add to kernel command line this option and I boot my computer. dmesg show me this: Linux version 2.6.18 (root@darkstar) (gcc version 3.3.6) #1 Wed Sep 27 08:19:45 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61424 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 VIAP4X ) @ 0x000f62d0 ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3000 ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x0fff3040 ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 Allocating PCI resources starting at 10000000 (gap: 06b7a000:f9486000) Detected 2200.142 MHz processor. Built 1 zonelists. Total pages: 65520 Kernel command line: root=/dev/hda5 vga=791 memmap=1K$110055K Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 256220k/262080k available (1923k kernel code, 5364k reserved, 806k data, 156k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4403.02 BogoMIPS (lpj=2201512) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Compat vDSO mapped to ffffe000. CPU: Intel(R) Celeron(R) CPU 2.20GHz stepping 07 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0a28) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb290, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by vt8235 PM PCI quirk: region 0500-050f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e4000000-e5ffffff PREFETCH window: d0000000-dfffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered Machine check exception polling timer started. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) fuse init (API version 7.7) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 3072k, total 65536k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:e700 vesafb: pmi: set display start = c00ce745, set palette = c00ce7ca vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 2 throttling states) ACPI: Thermal Zone [THRM] (46 C) ipmi message handler version 39.0 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize loop: loaded (max 8 devices) PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: SAMSUNG SV4012H, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: JLMS XJ-HD165H, ATAPI CD/DVD-ROM drive hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) ide-floppy driver 0.99.newide PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode Time: tsc clocksource has been installed. ACPI: (supports S0 S3 S4<6>Time: acpi_pm clocksource has been installed. S5) input: AT Translated Set 2 keyboard as /class/input/input0 ReiserFS: hda5: found reiserfs format "3.6" with standard journal input: ImPS/2 Generic Wheel Mouse as /class/input/input1 ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: replayed 14 transactions in 0 seconds ReiserFS: hda5: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 156k freed Adding 265032k swap on /dev/hda6. Priority:-1 extents:1 across:265032k ip_tables: (C) 2000-2006 Netfilter Core Team ip_conntrack version 2.4 (2047 buckets, 16376 max) - 224 bytes per conntrack via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 eth0: VIA Rhine II at 0x1ec00, 00:e0:4c:8e:49:95, IRQ 11. eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:11.5 to 64 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: irq 11, io mem 0xe6010000 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3 PCI: setting IRQ 3 as level-triggered ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 3 (level, low) -> IRQ 3 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 3, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 5, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected [ueagle-atm] driver ueagle 1.3 loaded usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9021) : Eagle II usb 2-1: reset full speed USB device using uhci_hcd and address 2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA P4M266x/P4N266 chipset agpgart: AGP aperture is 64M @ 0xe0000000 usb 2-1: [ueagle-atm] using iso mode usbcore: registered new driver ueagle-atm usb 2-1: [ueagle-atm] (re)booting started parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] usb 2-1: [ueagle-atm] modem operational usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17 I was waiting about one hour and I have another oops. I copy oops handy. [ I don't have a digital camera and I don't know person who wont to me lend. Sorry !!!] BUG: unable to handle kernel paging request at virtual address 000f9edf printing epip *pde=00000000 Ops: 0002 [#1] Modules linked in: ppp_deflate zlib_deflate bsd_comp pppoatm ipv6 partport_pc partport snd_pcm_oss snd_mixer_oss via_agp agpgart uagle_atm usbatm uhci_hcd ehci_hcd usbcore i2c_viapro i2c_core snd_via82xx snd_ac97.codec snd_ac97_bus snd_pcm snd_timer snd_page_alloc snd_mpu_401_uart snd_rawmidi ipt_LOG snd_seq_device snd xt_limit soundcore via_rhine mii xt_tcpudp xt_state iptables_filter nls_iso8859-2 nls_cp852 ip_contract_irc ip_contract_ftp xt_contract ip_contract iptables x_tables CPU: 0 EIP: 0060: [] Not tainted VLI EFLAGS: 00010083 (2.6.18 #1) EIP is at uhci_result_isochronous+0x4f/0x131 [uhci_hcd] eax: 000f9edf ebx: cf7b3600 edx:000f9edf edx:ceedfed0 esi:cf7b3600 edi:cba5c2a0 epb:ceedfed0 esp:c03adef8 ds:007b es:007b ss:0068 Process swapper (pid:0,ti=c03ac000 task=c03530a0 task.ti=c03ac000) Stack: cf15e3a0 cba5c330 ce2caac0 ceedfed0 cf7b3600 ce2caac0 00000001 ceedfed0 d0d185d1 c03adfa4 ceedfed0 cf7b3600 00000001 c03adfa4 d0d1884b 00000246 00000000 00000000 ceedfe00 d0d192ad ceedfed0 c03adfa4 ceedfe00 00000000 Call Trace: [] uhci_scan_qh+0x28/0x174 [uhci_hcd] [] uhci_scan_schedule+0x72/0xec [uhci_hcd] [] uhci_hcd_irq+0x27/0x4e [usbcore] [] handle_IRQ_event+0x21/0x47 []_do_IRQ+0x5b/0xa2 [] do_IRQ+0x40/04d [] common_interrupt+0x1a/0x20 [] acpi_processor_idle+0x1c4/0x2c3 [] cpu_idle+0x3f/0x5b [] start_kernel+0x197/0x199 Code 83 ed 14 39 c2 89 6c 24 04 0f 84 f3 00 00 00 8b 46 3c 8b 54 24 0c 3b 42 70 78 0a b8 8d ff ff ff e9 e0 00 00 00 89 c1 8b 6c 24 0c <00> 20 7b 0f 00 00 00 00 69 7f e0 ff 00 00 00 00 00 20 7b 0f 14 EIP:[] uhci_result_isochronous+0x4f/0x131 [uhci_hcd] SS:ESP 0068:c03adef8 <0> Kernel panic - not syncing: Fatal excepition in interrupt I run "objdump -d drivers/usb/host/uhci-hcd.o" and post the portion of the output for: uhci_result_isochronous 000010f1 : 10f1: 55 push %ebp 10f2: 57 push %edi 10f3: 56 push %esi 10f4: 53 push %ebx 10f5: 83 ec 10 sub $0x10,%esp 10f8: 89 44 24 0c mov %eax,0xc(%esp) 10fc: 89 54 24 08 mov %edx,0x8(%esp) 1100: 8b 42 04 mov 0x4(%edx),%eax 1103: 89 04 24 mov %eax,(%esp) 1106: 8b 50 10 mov 0x10(%eax),%edx 1109: 8b 70 0c mov 0xc(%eax),%esi 110c: 83 c0 10 add $0x10,%eax 110f: 8d 7a ec lea 0xffffffec(%edx),%edi 1112: 8b 6f 14 mov 0x14(%edi),%ebp 1115: 83 ed 14 sub $0x14,%ebp 1118: 39 c2 cmp %eax,%edx 111a: 89 6c 24 04 mov %ebp,0x4(%esp) 111e: 0f 84 f3 00 00 00 je 1217 1124: 8b 46 3c mov 0x3c(%esi),%eax 1127: 8b 54 24 0c mov 0xc(%esp),%edx 112b: 3b 42 70 cmp 0x70(%edx),%eax 112e: 78 0a js 113a 1130: b8 8d ff ff ff mov $0xffffff8d,%eax 1135: e9 e0 00 00 00 jmp 121a 113a: 89 c1 mov %eax,%ecx 113c: 8b 6c 24 0c mov 0xc(%esp),%ebp 1140: 81 e1 ff 03 00 00 and $0x3ff,%ecx 1146: 8b 45 58 mov 0x58(%ebp),%eax 1149: 8b 1c 88 mov (%eax,%ecx,4),%ebx 114c: 85 db test %ebx,%ebx 114e: 74 35 je 1185 1150: 8b 43 24 mov 0x24(%ebx),%eax 1153: 8b 55 54 mov 0x54(%ebp),%edx 1156: 8b 40 e0 mov 0xffffffe0(%eax),%eax 1159: 89 04 8a mov %eax,(%edx,%ecx,4) 115c: 8b 45 58 mov 0x58(%ebp),%eax 115f: 8d 6b 20 lea 0x20(%ebx),%ebp 1162: c7 04 88 00 00 00 00 movl $0x0,(%eax,%ecx,4) 1169: 39 6b 20 cmp %ebp,0x20(%ebx) 116c: 74 17 je 1185 116e: 8b 43 24 mov 0x24(%ebx),%eax 1171: 8b 48 04 mov 0x4(%eax),%ecx 1174: 8b 10 mov (%eax),%edx 1176: 89 11 mov %edx,(%ecx) 1178: 89 4a 04 mov %ecx,0x4(%edx) 117b: 89 00 mov %eax,(%eax) 117d: 39 6b 20 cmp %ebp,0x20(%ebx) 1180: 89 40 04 mov %eax,0x4(%eax) 1183: 75 e9 jne 116e 1185: 8b 5f 04 mov 0x4(%edi),%ebx 1188: f7 c3 00 00 80 00 test $0x800000,%ebx 118e: b9 ee ff ff ff mov $0xffffffee,%ecx 1193: 75 3d jne 11d2 1195: 8b 44 24 08 mov 0x8(%esp),%eax 1199: 8b 50 20 mov 0x20(%eax),%edx 119c: 89 d8 mov %ebx,%eax 119e: c1 ea 07 shr $0x7,%edx 11a1: 25 00 00 f6 00 and $0xf60000,%eax 11a6: 83 f2 01 xor $0x1,%edx 11a9: 83 e2 01 and $0x1,%edx 11ac: e8 fc f5 ff ff call 7ad 11b1: 89 c1 mov %eax,%ecx 11b3: 8b 54 24 08 mov 0x8(%esp),%edx 11b7: 8d 43 01 lea 0x1(%ebx),%eax 11ba: 25 ff 07 00 00 and $0x7ff,%eax 11bf: 01 42 38 add %eax,0x38(%edx) 11c2: 85 c9 test %ecx,%ecx 11c4: 8b 56 2c mov 0x2c(%esi),%edx 11c7: 89 42 08 mov %eax,0x8(%edx) 11ca: 8b 46 2c mov 0x2c(%esi),%eax 11cd: 89 48 0c mov %ecx,0xc(%eax) 11d0: 74 0a je 11dc 11d2: 8b 6c 24 08 mov 0x8(%esp),%ebp 11d6: ff 45 50 incl 0x50(%ebp) 11d9: 89 4e 40 mov %ecx,0x40(%esi) 11dc: 89 f8 mov %edi,%eax 11de: e8 71 ef ff ff call 154 11e3: 89 fa mov %edi,%edx 11e5: 8b 44 24 0c mov 0xc(%esp),%eax 11e9: e8 e6 ee ff ff call d4 11ee: 83 46 2c 10 addl $0x10,0x2c(%esi) 11f2: 8b 46 38 mov 0x38(%esi),%eax 11f5: 01 46 3c add %eax,0x3c(%esi) 11f8: 8b 7c 24 04 mov 0x4(%esp),%edi 11fc: 8b 47 14 mov 0x14(%edi),%eax 11ff: 8d 57 14 lea 0x14(%edi),%edx 1202: 83 e8 14 sub $0x14,%eax 1205: 89 44 24 04 mov %eax,0x4(%esp) 1209: 8b 04 24 mov (%esp),%eax 120c: 83 c0 10 add $0x10,%eax 120f: 39 c2 cmp %eax,%edx 1211: 0f 85 0d ff ff ff jne 1124 1217: 8b 46 40 mov 0x40(%esi),%eax 121a: 83 c4 10 add $0x10,%esp 121d: 5b pop %ebx 121e: 5e pop %esi 121f: 5f pop %edi 1220: 5d pop %ebp 1221: c3 ret ---------------------------------------------------------------------- Jestes kierowca? To poczytaj! >>> http://link.interia.pl/f199e - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/