Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161546AbWJDSPd (ORCPT ); Wed, 4 Oct 2006 14:15:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1161933AbWJDSPd (ORCPT ); Wed, 4 Oct 2006 14:15:33 -0400 Received: from www.tuxrocks.com ([64.62.190.123]:21267 "EHLO tuxrocks.com") by vger.kernel.org with ESMTP id S1161932AbWJDSPb (ORCPT ); Wed, 4 Oct 2006 14:15:31 -0400 Message-ID: <4523FA41.90805@tuxrocks.com> Date: Wed, 04 Oct 2006 13:15:29 -0500 From: Frank Sorenson User-Agent: Thunderbird 1.5.0.7 (X11/20060913) MIME-Version: 1.0 To: LKML Subject: Keyboard Stuttering Content-Type: multipart/mixed; boundary="------------090806000803040406090803" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33730 Lines: 753 This is a multi-part message in MIME format. --------------090806000803040406090803 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit I'm experiencing some severe keyboard stuttering on my laptop. The problem is particularly bad in X, and I believe it also occurs at the console, though I'm having a difficult time verifying that. The problem shows up as repeated characters (not regular key-repeat-related), and sometimes dropped key presses. I'm running the 2.6.18 x86_64 kernel on a Core 2 Duo. When I get the extra characters, each one shows under interrupt 1 for i8042 in /proc/interrupts, even when only one should show: CPU0 CPU1 0: 4228511 4430136 IO-APIC-edge timer 1: 3666 3713 IO-APIC-edge i8042 8: 0 0 IO-APIC-edge rtc 9: 2 0 IO-APIC-level acpi 12: 89035 77993 IO-APIC-edge i8042 14: 19246 6894 IO-APIC-edge libata 15: 34998 22732 IO-APIC-edge ide1 17: 8456 0 IO-APIC-level eth0 18: 2 0 IO-APIC-level ohci1394 19: 4558 3872 IO-APIC-level HDA Intel, uhci_hcd:usb3 20: 23 0 IO-APIC-level ehci_hcd:usb1, uhci_hcd:usb2 21: 0 0 IO-APIC-level uhci_hcd:usb4 22: 0 0 IO-APIC-level uhci_hcd:usb5 NMI: 1121 815 LOC: 8658522 8658062 ERR: 0 I have found that "nolapic" will make the keyboard work correctly (using XT-PIC), but obviously that has other negative side-effects (such as only one processor, etc.). I've attached a dmesg of boot with a broken keyboard (without nolapic). Has anyone experienced this problem before? Is there a fix for this keyboard stuttering? TThhhaannkss, Frrannk --------------090806000803040406090803 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.6.18 (root@george.sorensonfamily.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #3 SMP PREEMPT Wed Sep 27 13:50:31 CDT 2006 Command line: ro root=/dev/VolGroup00/RootVol vga=794 apic=verbose BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 0000000000100000 - 000000007fed3400 (usable) BIOS-e820: 000000007fed3400 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0007000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI 2.4 present. ACPI: RSDP (v000 DELL ) @ 0x00000000000fc1b0 ACPI: RSDT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000007fed39cd ACPI: FADT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000007fed4800 ACPI: MADT (v001 DELL M07 0x27d6071d ASL 0x00000047) @ 0x000000007fed5000 ACPI: MCFG (v016 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000007fed4fc0 ACPI: BOOT (v001 DELL M07 0x27d6071d ASL 0x00000061) @ 0x000000007fed4bc0 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x000000007fed3a05 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000007fed3000 Bootmem setup node 0 0000000000000000-000000007fed3000 No mptable found. On node 0 totalpages: 515695 DMA zone: 3927 pages, LIFO batch:0 DMA32 zone: 511768 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat Using ACPI (MADT) for SMP configuration information mapped APIC to ffffffffff5fd000 ( fee00000) mapped IOAPIC to ffffffffff5fc000 (00000000fec00000) Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 32384 bytes of per cpu data Built 1 zonelists. Total pages: 515695 Kernel command line: ro root=/dev/VolGroup00/RootVol vga=794 apic=verbose Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Checking aperture... Memory: 2052396k/2095948k available (3179k kernel code, 43164k reserved, 1443k data, 248k init) Calibrating delay using timer specific routine.. 4330.61 BogoMIPS (lpj=2165305) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) SMP alternatives: switching to UP code ACPI: Core revision 20060707 enabled ExtINT on CPU#0 ESR value after enabling vector: 00000000, after 00000040 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Using local APIC timer interrupts. result 10403067 Detected 10.403 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 masked ExtINT on CPU#1 Calibrating delay using timer specific routine.. 4326.95 BogoMIPS (lpj=2163475) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring enabled (TM2) Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 Brought up 2 CPUs testing NMI watchdog ... OK. time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. time.c: Detected 2163.840 MHz processor. migration_cost=26 checking if image is initramfs... it is Freeing initrd memory: 1608k freed PM: Adding info for No Bus:platform NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:acpi ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PM: Adding info for No Bus:pci0000:00 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1c.1 PM: Adding info for pci:0000:00:1c.3 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.3 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:0c:00.0 PM: Adding info for pci:0000:03:00.0 PM: Adding info for pci:0000:03:01.0 PM: Adding info for pci:0000:03:01.1 PM: Adding info for pci:0000:03:01.2 PM: Adding info for pci:0000:03:01.3 PM: Adding info for pci:0000:03:01.4 ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *4 ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7) ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 IOAPIC[0]: Set PCI routing entry (2-12 -> 0x89 -> IRQ 12 Mode:0 Active:0) PM: Adding info for pnp:00:04 IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0) PM: Adding info for pnp:00:05 IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0) PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 PM: Adding info for pnp:00:09 IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0) PM: Adding info for pnp:00:0a pnp: PnP ACPI: found 11 devices Intel 82802 RNG detected SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 .... register #02: 00170020 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 39 02 000 00 0 0 0 0 0 0 0 31 03 000 00 0 0 0 0 0 0 0 41 04 000 00 0 0 0 0 0 0 0 49 05 000 00 0 0 0 0 0 0 0 51 06 000 00 0 0 0 0 0 0 0 59 07 000 00 0 0 0 0 0 0 0 61 08 000 00 1 0 0 0 0 0 0 69 09 000 00 0 1 0 0 0 0 0 71 0a 000 00 0 0 0 0 0 0 0 79 0b 000 00 0 0 0 0 0 0 0 81 0c 000 00 1 0 0 0 0 0 0 89 0d 000 00 1 0 0 0 0 0 0 91 0e 000 00 0 0 0 0 0 0 0 99 0f 000 00 0 0 0 0 0 0 0 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Bluetooth: Core ver 2.10 PM: Adding info for platform:bluetooth NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized PCI-GART: No AMD northbridge found. pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved pnp: 00:02: ioport range 0x1008-0x100f could not be reserved pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved pnp: 00:03: ioport range 0x1006-0x1007 has been reserved pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved pnp: 00:03: ioport range 0x1060-0x107f has been reserved pnp: 00:03: ioport range 0x1080-0x10bf has been reserved pnp: 00:03: ioport range 0x10c0-0x10df has been reserved pnp: 00:08: ioport range 0xc80-0xcff could not be reserved pnp: 00:08: ioport range 0x910-0x91f has been reserved pnp: 00:08: ioport range 0x920-0x92f has been reserved pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved pnp: 00:08: ioport range 0x930-0x97f has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: dd000000-dfefffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: dcf00000-dcffffff PREFETCH window: d0000000-d00fffff PCI: Bridge: 0000:00:1c.3 IO window: d000-dfff MEM window: dcc00000-dcefffff PREFETCH window: d0100000-d03fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: dcb00000-dcbfffff PREFETCH window: disabled. GSI 16 sharing vector 0xA9 and IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 GSI 18 sharing vector 0xB9 and IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 18 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x79 set to 0x1 audit: initializing netlink socket (disabled) audit(1159984368.501:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) fuse init (API version 7.7) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PM: Adding info for pci_express:0000:00:01.0:pcie00 Allocate Port Service[0000:00:01.0:pcie03] PM: Adding info for pci_express:0000:00:01.0:pcie03 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PM: Adding info for pci_express:0000:00:1c.0:pcie00 Allocate Port Service[0000:00:1c.0:pcie02] PM: Adding info for pci_express:0000:00:1c.0:pcie02 Allocate Port Service[0000:00:1c.0:pcie03] PM: Adding info for pci_express:0000:00:1c.0:pcie03 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] PM: Adding info for pci_express:0000:00:1c.1:pcie00 Allocate Port Service[0000:00:1c.1:pcie02] PM: Adding info for pci_express:0000:00:1c.1:pcie02 Allocate Port Service[0000:00:1c.1:pcie03] PM: Adding info for pci_express:0000:00:1c.1:pcie03 PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] PM: Adding info for pci_express:0000:00:1c.3:pcie00 Allocate Port Service[0000:00:1c.3:pcie02] PM: Adding info for pci_express:0000:00:1c.3:pcie02 Allocate Port Service[0000:00:1c.3:pcie03] PM: Adding info for pci_express:0000:00:1c.3:pcie03 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.1 pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0 Evaluate _OSC Set fails. Status = 0x0005 Evaluate _OSC Set fails. Status = 0x0005 pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.3 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 PM: Adding info for platform:vesafb.0 vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010100000, using 5120k, total 262144k vesafb: mode is 1280x1024x16, linelength=2560, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM] (51 C) Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 945GM Chipset. agpgart: AGP aperture is 256M @ 0x0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize b44.c:v1.01 (Jun 16, 2006) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: Broadcom 4400 10/100BaseT Ethernet 00:15:c5:4b:5e:8f Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive PM: Adding info for No Bus:ide1 ide1 at 0x170-0x177,0x376 on irq 15 PM: Adding info for ide:1.0 hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00ac6 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17 ata: 0x170 IDE port busy ata: conflict with ide1 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 ata2: DUMMY scsi0 : ata_piix PM: Adding info for No Bus:host0 ata1.00: ATA-7, max UDMA/100, 192426570 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 8 ata1.00: configured for UDMA/100 scsi1 : ata_piix PM: Adding info for No Bus:host1 PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72101 MCZO PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 192426570 512-byte hdwr sectors (98522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 Losing some ticks... checking if CPU frequency changed. PM: Adding info for platform:i8042 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice md: multipath personality registered for level -4 md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.4 loaded device-mapper: multipath round-robin: version 1.0.0 loaded device-mapper: multipath emc: version 0.0.3 loaded Bluetooth: Virtual HCI driver ver 1.2 Bluetooth: Broadcom Blutonium firmware driver ver 1.0 usbcore: registered new driver bcm203x Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). input: AT Translated Set 2 keyboard as /class/input/input0 GSI 19 sharing vector 0xC1 and IRQ 19 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc1 -> IRQ 19 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xdfffc000 irq 19 TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.1 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 248k freed Write protecting the kernel read-only data: 657k Synaptics Touchpad, model: 1, fw: 6.2, id: 0xfa0b1, caps: 0xa04713/0x200000 input: SynPS/2 Synaptics TouchPad as /class/input/input1 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. security: 3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats security: 58 classes, 43474 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), not configured for labeling SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1159984372.091:2): policy loaded auid=4294967295 SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts GSI 20 sharing vector 0xC9 and IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ 20 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 PM: Adding info for No Bus:usbdev1.1_ep81 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17 PM: Adding info for No Bus:i2c-0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected bcm43xx driver PM: Adding info for No Bus:usbdev2.1_ep81 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000bf60 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 GSI 21 sharing vector 0xD1 and IRQ 21 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd1 -> IRQ 21 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000bf40 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new high speed USB device using ehci_hcd and address 2 ieee1394: Initialized config rom entry `ip1394' PM: Adding info for No Bus:usbdev4.1_ep81 GSI 22 sharing vector 0xD9 and IRQ 22 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xd9 -> IRQ 22 Mode:1 Active:1) ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 22, io base 0x0000bf20 PM: Adding info for usb:usb5 PM: Adding info for No Bus:usbdev5.1_ep00 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PM: Adding info for usb:1-1 PM: Adding info for No Bus:usbdev1.2_ep00 usb 1-1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-1:1.0 hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected PM: Adding info for No Bus:usbdev1.2_ep81 PM: Adding info for No Bus:usbdev5.1_ep81 ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0c:00.0 to 64 bcm43xx: Chip ID 0x4321, rev 0x1 bcm43xx: Number of cores: 5 bcm43xx: Core 0: ID 0x800, rev 0x12, vendor 0x4243, enabled bcm43xx: Core 1: ID 0x812, rev 0xb, vendor 0x4243, disabled bcm43xx: Unsupported 80211 core revision 11 bcm43xx: Core 2: ID 0x820, rev 0x2, vendor 0x4243, enabled bcm43xx: Core 3: ID 0x804, rev 0xd, vendor 0x4243, enabled bcm43xx: Multiple PCI cores found. bcm43xx: Core 4: ID 0x817, rev 0x4, vendor 0x4243, disabled bcm43xx: WARNING: Invalid SPROM checksum (0x01, expected: 0xFF) bcm43xx: Detected PHY: Version: 5, Type 4, Revision 1 bcm43xx: Error: Unknown PHY Type 4 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18 PM: Adding info for ieee1394:fw-host0 kobject_add failed for usbdev1.2_ep81 with -EEXIST, don't try to register things with the same name in the same directory. Call Trace: BUG: using smp_processor_id() in preemptible [00000001] code: khubd/163 caller is dump_trace+0x22/0x297 Call Trace: [] debug_smp_processor_id+0xb4/0xc4 [] dump_trace+0x22/0x297 [] show_trace+0x3c/0x52 [] dump_stack+0x15/0x17 [] kobject_put+0x19/0x1b [] kobject_add+0x180/0x1ae [] device_add+0xad/0x4db [] init_waitqueue_head+0x1f/0x30 [] device_register+0x19/0x1e [] usb_create_ep_files+0x13a/0x1a0 [] usb_create_sysfs_intf_files+0x86/0xa3 [] usb_set_configuration+0x3c5/0x40e [] usb_new_device+0x277/0x2da [] hub_thread+0x76c/0xb75 [] _spin_unlock_irq+0x14/0x2e [] autoremove_wake_function+0x0/0x38 [] _spin_unlock_irqrestore+0x1d/0x39 [] hub_thread+0x0/0xb75 [] kthread+0xd8/0x10e [] schedule_tail+0x46/0xaf [] child_rip+0xa/0x12 [] kthread+0x0/0x10e [] child_rip+0x0/0x12 [] kobject_put+0x19/0x1b [] kobject_add+0x180/0x1ae [] device_add+0xad/0x4db [] init_waitqueue_head+0x1f/0x30 [] device_register+0x19/0x1e [] usb_create_ep_files+0x13a/0x1a0 [] usb_create_sysfs_intf_files+0x86/0xa3 [] usb_set_configuration+0x3c5/0x40e [] usb_new_device+0x277/0x2da [] hub_thread+0x76c/0xb75 [] _spin_unlock_irq+0x14/0x2e [] autoremove_wake_function+0x0/0x38 [] _spin_unlock_irqrestore+0x1d/0x39 [] hub_thread+0x0/0xb75 [] kthread+0xd8/0x10e [] schedule_tail+0x46/0xaf [] child_rip+0xa/0x12 [] kthread+0x0/0x10e [] child_rip+0x0/0x12 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[dcbfd800-dcbfdfff] Max Packet=[2048] IR/IT contexts=[4/4] Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M PM: Adding info for ieee1394:354fc0003d716541 ieee1394: Host added: ID:BUS[0-00:1023] GUID[354fc0003d716541] PM: Adding info for ieee1394:354fc0003d716541-0 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M lp: driver loaded but no devices found ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev dm-1, type ext3), uses xattr Adding 4194296k swap on /dev/VolGroup00/SwapVol. Priority:-1 extents:1 across:4194296k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts floppy0: no floppy controllers found b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts --------------090806000803040406090803-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/