Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751304AbWJEB2j (ORCPT ); Wed, 4 Oct 2006 21:28:39 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751307AbWJEB2j (ORCPT ); Wed, 4 Oct 2006 21:28:39 -0400 Received: from nf-out-0910.google.com ([64.233.182.190]:16996 "EHLO nf-out-0910.google.com") by vger.kernel.org with ESMTP id S1751304AbWJEB2i (ORCPT ); Wed, 4 Oct 2006 21:28:38 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type:content-transfer-encoding:content-disposition; b=Q7BwaCWXalMoMuCzOLR0Chuq5QSfgXki9wkUpi4ZaJO6sKUc329Hz+JL4/X/w1j+6L/NGj74kyFhqa4BxW27c/4jyW3HRl6OtYMYBpV15e145vWus3A4pAzae2n3M3M/Okrz/HVceqOMQBbHBf08xe92Q16NVCdMJf4u/VCVl7w= Message-ID: <9a0545880610041828w658d7aaco20348d54e9321d8f@mail.gmail.com> Date: Wed, 4 Oct 2006 18:28:35 -0700 From: "Steve Hindle" To: linux-kernel@vger.kernel.org, jgarzik@pobox.com, linux-ide@vger.kernel.org Subject: PROBLEM: Hardlock with 2.6.1[678] on Abit AI7, ICH5 + XFS, SATA under heavy I/O load MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 21175 Lines: 500 Hello, My machine is hardlocking with recent kernels (including 2.6.18-mm3) under heavy I/O load (for instance, just compiling the kernel is enough to lock the machine). No bug,oops,or panic and nothing in the system logs. Hasn't seemed to cause any fs corruption (which strikes me as odd, since its generally writing files when it hangs..) Steve Environment, dmesg, interrupts, etc: If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux blackie 2.6.16-2-686-smp #1 SMP Sun Jul 16 01:23:04 UTC 2006 i686 GNU/Linux Gnu C 3.3.5 Gnu make 3.81 binutils 2.15 util-linux 2.12p mount 2.12p module-init-tools 3.2.2 e2fsprogs 1.37 reiserfsprogs 3.6.19 xfsprogs 2.6.20 PPP 2.4.3 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.2.1 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.2.1 udev 100 Modules Loaded ipv6 bridge dummy loop sr_mod sbp2 ide_generic snd_intel8x0 snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm mousedev snd_timer ath_pci snd ath_rate_sample wlan ath_hal evdev psmouse i2c_i801 shpchp pci_hotplug soundcore snd_page_alloc tsdev joydev parport_pc serio_raw intel_agp agpgart pcspkr i2c_core parport eth1394 rtc floppy xfs exportfs ide_disk ide_cd cdrom usbhid sd_mod 8139too piix ata_piix libata scsi_mod ehci_hcd 8139cp mii ohci1394 ieee1394 generic uhci_hcd usbcore ide_core thermal processor fan Linux version 2.6.16-2-686-smp (Debian 2.6.16-16bpo1) (nobse@backports.org) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Sun Jul 16 01:23:04 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 1023MB LOWMEM available. found SMP MP-table at 000f5f20 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 258032 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.2 present. ACPI: RSDP (v000 IntelR ) @ 0x000f7ae0 ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff7240 ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs More than 8 CPUs detected and CONFIG_X86_PC cannot handle it. Use CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP. Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelists Kernel command line: root=/dev/sdb4 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3061.173 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) Memory: 1030796k/1048512k available (1568k kernel code, 17056k reserved, 630k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6131.50 BogoMIPS (lpj=12263011) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6121.53 BogoMIPS (lpj=12243064) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000180 0000441d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 Total of 2 processors activated (12253.03 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=8000 checking if image is initramfs... it is Freeing initrd memory: 4307k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfba70, last bus=2 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: f8000000-faffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1e.0 IO window: a000-afff MEM window: fb000000-fb0fffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 audit: initializing netlink socket (disabled) audit(1159985293.348:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 6, 262144 bytes) TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode ACPI wakeup devices: PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 180k freed ACPI: Thermal Zone [THRM] (20 C) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000bc00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ieee1394: Initialized config rom entry `ip1394' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000b000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000b400 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000b800 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-2: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 193 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193] MMIO=[fb015000-fb0157ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 SCSI subsystem initialized ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfb100000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected libata version 1.20 loaded. usb 1-2: device descriptor read/all, error -71 ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xC402 bmdma 0xD000 irq 185 ata2: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD008 irq 185 ata1: dev 0 cfg 49:2f00 82:346b 83:5b01 84:4003 85:3469 86:1801 87:4003 88:207f ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA ata1: dev 0 configured for UDMA/133 scsi0 : ata_piix ata2: dev 0 cfg 49:2f00 82:346b 83:7f61 84:4003 85:3469 86:3c41 87:4003 88:207f ata2: dev 0 ATA-6, max UDMA/133, 312581808 sectors: LBA48 ata2: dev 0 configured for UDMA/133 scsi1 : ata_piix Vendor: ATA Model: WDC WD800JD-00HK Rev: 13.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD1600JD-22H Rev: 08.0 Type: Direct-Access ANSI SCSI revision: 05 8139cp: pci dev 0000:02:02.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... 8139too Fast Ethernet driver 0.9.27 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: Attached scsi disk sdb usb 1-2: new full speed USB device using uhci_hcd and address 4 hda: MAXTOR 6L020J1, ATA DISK drive usb 1-2: configuration #1 chosen from 1 choice hub 1-2:1.0: USB hub found hub 1-2:1.0: 4 ports detected usb 1-2.2: new low speed USB device using uhci_hcd and address 5 ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d4d663] usb 1-2.2: configuration #1 chosen from 1 choice ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... usb 1-2.3: new low speed USB device using uhci_hcd and address 6 usb 1-2.3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input0 input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2.2 input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input1 input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.0-2.2 input: Logitech USB-PS/2 Trackball as /class/input/input2 input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.0-2.3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 185 eth0: RealTek RTL8139 at 0xa000, 00:50:8d:d5:d6:63, IRQ 185 eth0: Identified 8139 chip type 'RTL-8100B/8139D' hda: max request size: 128KiB hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hda: 40132503 sectors (20547 MB) w/1819KiB Cache, CHS=39813/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sdb4 Ending clean XFS mount for filesystem: sdb4 FDC 0 is a post-1991 82077 Real Time Clock Driver v1.12ac eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) input: PC Speaker as /class/input/input3 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: AGP aperture is 128M @ 0xf0000000 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ts: Compaq touchscreen protocol output pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) wlan: 0.8.6.0 (EXPERIMENTAL) ath_rate_sample: 1.2 ath_pci: 0.9.6.0 (EXPERIMENTAL) ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 22 (level, low) -> IRQ 209 Build date: Jul 17 2006 Debugging version (IEEE80211) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 7.9 phy 4.5 radio 5.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0xfb000000, irq=209 mice: PS/2 mouse device common for all mice hw_random: RNG not detected ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 57705 usecs intel8x0: clocking to 48000 ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1) ieee1394: sbp2: Try serialize_io=0 for better performance loop: loaded (max 32 devices) hw_random: RNG not detected eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 Bridge firewalling registered device dummy0 entered promiscuous mode xenbr0: port 1(dummy0) entering learning state NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver xenbr0: topology change detected, propagating xenbr0: port 1(dummy0) entering forwarding state dummy0: no IPv6 routers present xenbr0: no IPv6 routers present eth0: no IPv6 routers present processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 1 cpu MHz : 3061.173 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni monitor ds_cpl cid xtpr bogomips : 6131.50 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) 4 CPU 3.00GHz stepping : 1 cpu MHz : 3061.173 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc pni monitor ds_cpl cid xtpr bogomips : 6121.53 steve@blackie:~$ cat /proc/interrupts CPU0 CPU1 0: 300651 0 IO-APIC-edge timer 7: 0 0 IO-APIC-edge parport0 8: 4 0 IO-APIC-edge rtc 9: 1 0 IO-APIC-level acpi 14: 84 0 IO-APIC-edge ide0 15: 29 0 IO-APIC-edge ide1 169: 20371 0 IO-APIC-level uhci_hcd:usb1, uhci_hcd:usb4 177: 0 0 IO-APIC-level uhci_hcd:usb2 185: 7655 0 IO-APIC-level uhci_hcd:usb3, libata, eth0 193: 3 0 IO-APIC-level ohci1394, Intel ICH5 201: 2 0 IO-APIC-level ehci_hcd:usb5 209: 0 0 IO-APIC-level ath0 NMI: 0 0 LOC: 300588 300587 ERR: 0 MIS: 0 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/