Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        Ohad Ben-Cohen <ohad@wizery.com>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        Andy Gross <agross@kernel.org>
CC:     <linux-remoteproc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-msm@vger.kernel.org>, <arnaud.pouliquen@foss.st.com>
Subject: [PATCH 0/7] Restructure the rpmsg char and introduce the rpmsg-raw channel
Date:   Tue, 23 Mar 2021 13:27:30 +0100
Message-ID: <20210323122737.23035-1-arnaud.pouliquen@foss.st.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

This series is the second step in the division of the series [1]: 
"Introducing a Generic IOCTL Interface for RPMsg Channel Management".

The purpose of this patchset is to:
- split the control code related to the control
  and the endpoint. 
- define the rpmsg-raw channel, associated with the rpmsg char device to
  allow it to be instantiated using a name service announcement.
    
An important point to keep in mind for this patchset is that the concept of
channel is associated with a default endpoint. To facilitate communication
with the remote side, this default endpoint must have a fixed address.

Consequently, for this series, I made a design choice to fix the endpoint
on the "rpmsg-raw" channel probe, and not allow to create/destroy an endpoint
on FS open/close.

This is only applicable for channels probed by the rpmsg bus. The behavior,
using the RPMSG_CREATE_EPT_IOCTL and RPMSG_DESTROY_EPT_IOCTL controls, is
preserved.
  
The next steps should be to correct this:
Introduce the IOCTLs RPMSG_CREATE_DEV_IOCTL and RPMSG_DESTROY_DEV_IOCTL
to instantiate the rpmsg devices

[1]: https://patchwork.kernel.org/project/linux-remoteproc/list/?series=435523

Arnaud Pouliquen (7):
  rpmsg: char: Export eptdev create an destroy functions
  rpmsg: Move the rpmsg control device from rpmsg_char to rpmsg_ctrl
  rpmsg: Update rpmsg_chrdev_register_device function
  rpmsg: char: Introduce __rpmsg_chrdev_create_eptdev function
  rpmsg: char: Introduce a rpmsg driver for the rpmsg char device
  rpmsg: char: No dynamic endpoint management for the default one
  rpmsg: char: Return error if user try to destroy a default endpoint.

 drivers/rpmsg/Kconfig             |   9 ++
 drivers/rpmsg/Makefile            |   1 +
 drivers/rpmsg/qcom_glink_native.c |   2 +-
 drivers/rpmsg/qcom_smd.c          |   2 +-
 drivers/rpmsg/rpmsg_char.c        | 221 +++++++++-------------------
 drivers/rpmsg/rpmsg_char.h        |  50 +++++++
 drivers/rpmsg/rpmsg_ctrl.c        | 233 ++++++++++++++++++++++++++++++
 drivers/rpmsg/rpmsg_internal.h    |   8 +-
 drivers/rpmsg/virtio_rpmsg_bus.c  |   2 +-
 9 files changed, 368 insertions(+), 160 deletions(-)
 create mode 100644 drivers/rpmsg/rpmsg_char.h
 create mode 100644 drivers/rpmsg/rpmsg_ctrl.c

-- 
2.17.1