Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422853AbWJGBx4 (ORCPT ); Fri, 6 Oct 2006 21:53:56 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1422860AbWJGBxz (ORCPT ); Fri, 6 Oct 2006 21:53:55 -0400 Received: from moci.net4u.de ([217.7.64.195]:11740 "EHLO moci.net4u.de") by vger.kernel.org with ESMTP id S1422853AbWJGBxw (ORCPT ); Fri, 6 Oct 2006 21:53:52 -0400 From: Ernst Herzberg Reply-To: earny@net4u.de To: linux-kernel@vger.kernel.org Subject: 2.6.19-rc1 [ueagle-atm] Oops Date: Sat, 7 Oct 2006 03:53:37 +0200 User-Agent: KMail/1.9.1 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200610070353.38257.list-lkml@net4u.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33348 Lines: 757 Moin. Works without problems on 2.6.18. 2.6.19-rc1: (no, it does not work. The message "usb 2-2: [ueagle-atm] modem operational" below is a lie;) usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) : Eagle I usb 2-2: reset full speed USB device using uhci_hcd and address 3 BUG: unable to handle kernel paging request at virtual address 74617473 printing eip: c018c5ab *pde = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: dvb_bt8xx bt878 dvb_pll cx24110 bttv ir_common compat_ioctl32 btcx_risc tveeprom stv0299 ves1x93 ueagle_atm usbatm atm dvb_ttpci ttpci_eeprom saa7146_vv video_buf videodev v4l1_compat v4l2_common saa7146 dvb_core processor button ohci_hcd uhci_hcd ehci_hcd usbcore iptable_nat ipt_MASQUERADE ip_nat ip_conntrack nfnetlink iptable_filter ip_tables x_tables pppoe pppox ppp_async ppp_generic slhc crc_ccitt tun ebtables ppdev parport_pc lp parport evdev psmouse CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc1 #1) EIP is at sysfs_dirent_exist+0x4b/0x6f eax: f99e9573 ebx: f7e41a04 ecx: 00000004 edx: 00000004 esi: f99e9561 edi: 74617473 ebp: f55593e0 esp: f54b7c68 ds: 007b es: 007b ss: 0068 Process khubd (pid: 4078, ti=f54b7000 task=f54bc540 task.ti=f54b7000) Stack: 74617473 f99e948a f56fc714 00000000 f55593d4 c018bec6 00008124 00000004 00000004 c0117574 0000000f f553ba50 f54b7cc0 f56fc714 f99eae24 00000000 f99ead4c c018dab0 f56fc714 f553ba50 f5432180 00000000 f54d24e0 f99e800c Call Trace: [] sysfs_add_file+0x2e/0x70 [] nr_processes+0x4/0x6 [] sysfs_create_group+0x5b/0xcb [] uea_bind+0x215/0x53c [ueagle_atm] [] uea_kthread+0x0/0xb98 [ueagle_atm] [] uea_bind+0x0/0x53c [ueagle_atm] [] usbatm_usb_probe+0x109/0x7b2 [usbatm] [] uea_probe+0x73/0x17d [ueagle_atm] [] usb_probe_interface+0x56/0x83 [usbcore] [] really_probe+0x2e/0xbf [] driver_probe_device+0x3f/0x93 [] bus_for_each_drv+0x3e/0x5c [] device_attach+0x62/0x66 [] __device_attach+0x0/0x5 [] bus_attach_device+0x1e/0x3f [] device_add+0x3c6/0x476 [] usb_set_configuration+0x394/0x4b1 [usbcore] [] generic_probe+0x15c/0x223 [usbcore] [] usb_probe_device+0x33/0x38 [usbcore] [] really_probe+0x2e/0xbf [] driver_probe_device+0x3f/0x93 [] bus_for_each_drv+0x3e/0x5c [] device_attach+0x62/0x66 [] __device_attach+0x0/0x5 [] bus_attach_device+0x1e/0x3f [] device_add+0x3c6/0x476 [] usb_cache_string+0x7e/0x82 [usbcore] [] usb_new_device+0x5d/0xcb [usbcore] [] hub_thread+0x4d6/0xbc8 [usbcore] [] schedule+0x2b1/0x64a [] autoremove_wake_function+0x0/0x37 [] hub_thread+0x0/0xbc8 [usbcore] [] kthread+0xc9/0xcd [] kthread+0x0/0xcd [] kernel_thread_helper+0x7/0x1c ======================= Code: 16 eb 42 8b 5b 04 83 eb 04 8b 43 04 0f 18 00 90 8d 43 04 39 e8 74 2e 8b 43 14 85 c0 74 e5 89 d8 e8 6b ee ff ff 89 c6 8b 3c 24 ac 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 c5 b8 ef EIP: [] sysfs_dirent_exist+0x4b/0x6f SS:ESP 0068:f54b7c68 ---------------------------------------------------------------------- Full dmesg: Linux version 2.6.19-rc1 (root@oernie) (gcc version 4.1.1 (Gentoo 4.1.1)) #1 PREEMPT Sat Oct 7 02:29:35 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data) BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524208) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524208 early_node_map[1] active PFN ranges 0: 0 -> 524208 On node 0 totalpages: 524208 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292529 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fad80 ACPI: XSDT (v001 A M I OEMXSDT 0x09000507 MSFT 0x00000097) @ 0x7ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x09000507 MSFT 0x00000097) @ 0x7ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x09000507 MSFT 0x00000097) @ 0x7ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x09000507 MSFT 0x00000097) @ 0x7ffc0040 ACPI: DSDT (v001 A0030 A0030011 0x00000011 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7fb80000) Detected 2798.861 MHz processor. Built 1 zonelists. Total pages: 520113 Kernel command line: root=/dev/md2 video=radeonfb:1280x1024-32@60 netconsole=4444@217.7.64.224/eth1,6666@217.7.64.225/00:30:1B:B2:40:0C netconsole: local port 4444 netconsole: local IP 217.7.64.224 netconsole: interface eth1 netconsole: remote port 6666 netconsole: remote IP 217.7.64.225 netconsole: remote ethernet address 00:30:1b:b2:40:0c mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c046d000 soft=c046c000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2074364k/2096832k available (2444k kernel code, 21300k reserved, 850k data, 184k init, 1179328k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0439000 - 0xc0467000 ( 184 kB) .data : 0xc03630db - 0xc04379e8 ( 850 kB) .text : 0xc0100000 - 0xc03630db (2444 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5599.27 BogoMIPS (lpj=2799637) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices intel_rng: FWH not detected SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fe900000-fe9fffff PREFETCH window: b7e00000-f7dfffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: f7e00000-f7efffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 262144 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14a highmem bounce pool size: 64 pages io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 radeonfb: Found Intel x86 BIOS ROM Image radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=325.00 Mhz, System=203.00 MHz radeonfb: PLL min 20000 max 40000 radeonfb: Monitor 1 type CRT found radeonfb: EDID probed radeonfb: Monitor 2 type CRT found radeonfb: EDID probed Console: switching to colour frame buffer device 160x64 radeonfb (0000:01:00.0): ATI Radeon AQ Real Time Clock Driver v1.12ac Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 21 (level, low) -> IRQ 17 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:02:09.0: 3Com PCI 3c905C Tornado at f8804400. ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 18 eth1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 17 eth2: VIA Rhine II at 0x1d000, 00:05:5d:dd:0a:80, IRQ 17. eth2: MII PHY found at address 8, status 0x7809 advertising 01e1 Link 0000. netconsole: device eth1 not up yet, forcing it netconsole: timeout waiting for carrier eth1: -- ERROR -- Class: Hardware failure Nr: 0x270 Msg: 2 Pair Downshift detected eth1: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: disabled tx-checksum: disabled rx-checksum: disabled netconsole: network logging started libata version 2.00 loaded. ata_piix 0000:00:1f.1: version 2.00ac6 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 160086528 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATA-7, max UDMA/100, 156368016 sectors: LBA48 ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080P0 YAR4 PQ: 0 ANSI: 5 SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5 SCSI device sdb: 156368016 512-byte hdwr sectors (80060 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 156368016 512-byte hdwr sectors (80060 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb3 sd 1:0:0:0: Attached scsi disk sdb sd 1:0:0:0: Attached scsi generic sg1 type 0 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata3: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 19 ata4: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 19 scsi2 : ata_piix ata3.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/133 scsi3 : ata_piix ata4.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata4.00: ata4: dev 0 multi count 16 ata4.00: configured for UDMA/133 scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sd 2:0:0:0: Attached scsi disk sdc sd 2:0:0:0: Attached scsi generic sg2 type 0 scsi 3:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sd 3:0:0:0: Attached scsi disk sdd sd 3:0:0:0: Attached scsi generic sg3 type 0 sata_promise 0000:02:04.0: version 1.04 ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 20 ata5: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 20 ata6: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 20 scsi4 : sata_promise ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 scsi5 : sata_promise ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32) ata6.00: configured for UDMA/133 scsi 4:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back sde: sde1 sd 4:0:0:0: Attached scsi disk sde sd 4:0:0:0: Attached scsi generic sg4 type 0 scsi 5:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5 SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back sdf: sdf1 sd 5:0:0:0: Attached scsi disk sdf sd 5:0:0:0: Attached scsi generic sg5 type 0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /class/input/input0 input: AT Translated Set 2 keyboard as /class/input/input1 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 raid6: int32x1 609 MB/s raid6: int32x2 792 MB/s raid6: int32x4 765 MB/s raid6: int32x8 511 MB/s raid6: mmxx1 2191 MB/s raid6: mmxx2 2875 MB/s raid6: sse1x1 1339 MB/s raid6: sse1x2 2519 MB/s raid6: sse2x1 2535 MB/s raid6: sse2x2 3152 MB/s raid6: using algorithm sse2x2 (3152 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 3556.000 MB/sec raid5: using function: pIII_sse (3556.000 MB/sec) TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 15 Bridge firewalling registered 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller Using IPI Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Time: tsc clocksource has been installed. md: Autodetecting RAID arrays. md: autorun ... md: considering sdf1 ... md: adding sdf1 ... md: adding sde1 ... md: adding sdd1 ... md: adding sdc1 ... md: sdb3 has different UUID to sdf1 md: sdb2 has different UUID to sdf1 md: sdb1 has different UUID to sdf1 md: sda3 has different UUID to sdf1 md: sda2 has different UUID to sdf1 md: sda1 has different UUID to sdf1 md: created md3 md: bind md: bind md: bind md: bind md: running: raid5: device sdf1 operational as raid disk 3 raid5: device sde1 operational as raid disk 2 raid5: device sdd1 operational as raid disk 1 raid5: device sdc1 operational as raid disk 0 raid5: allocated 4196kB for md3 raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2 RAID5 conf printout: --- rd:4 wd:4 disk 0, o:1, dev:sdc1 disk 1, o:1, dev:sdd1 disk 2, o:1, dev:sde1 disk 3, o:1, dev:sdf1 md: considering sdb3 ... md: adding sdb3 ... md: sdb2 has different UUID to sdb3 md: sdb1 has different UUID to sdb3 md: adding sda3 ... md: sda2 has different UUID to sdb3 md: sda1 has different UUID to sdb3 md: created md2 md: bind md: bind md: running: md2: setting max_sectors to 32, segment boundary to 8191 raid0: looking at sdb3 raid0: comparing sdb3(76035520) with sdb3(76035520) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda3 raid0: comparing sda3(77894592) with sdb3(76035520) raid0: NOT EQUAL raid0: comparing sda3(77894592) with sda3(77894592) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking sda3 ... contained as device 0 (77894592) is smallest!. raid0: checking sdb3 ... nope. raid0: zone->nb_dev: 1, size: 1859072 raid0: current zone offset: 77894592 raid0: done. raid0 : md_size is 153930112 blocks. raid0 : conf->hash_spacing is 152071040 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: considering sdb2 ... md: adding sdb2 ... md: sdb1 has different UUID to sdb2 md: adding sda2 ... md: sda1 has different UUID to sdb2 md: created md1 md: bind md: bind md: running: md1: setting max_sectors to 32, segment boundary to 8191 raid0: looking at sdb2 raid0: comparing sdb2(1951808) with sdb2(1951808) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda2 raid0: comparing sda2(1952896) with sdb2(1951808) raid0: NOT EQUAL raid0: comparing sda2(1952896) with sda2(1952896) raid0: END raid0: ==> UNIQUE raid0: 2 zones raid0: FINAL 2 zones raid0: zone 1 raid0: checking sda2 ... contained as device 0 (1952896) is smallest!. raid0: checking sdb2 ... nope. raid0: zone->nb_dev: 1, size: 1088 raid0: current zone offset: 1952896 raid0: done. raid0 : md_size is 3904704 blocks. raid0 : conf->hash_spacing is 3903616 blocks. raid0 : nb_zone is 2. raid0 : Allocating 8 bytes for hash. md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. ReiserFS: md2: found reiserfs format "3.6" with standard journal ReiserFS: md2: using ordered data mode ReiserFS: md2: journal params: device md2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md2: checking transaction log (md2) ReiserFS: md2: replayed 206 transactions in 15 seconds ReiserFS: md2: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 184k freed warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call warning: process `touch' used the removed sysctl system call parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] parport0: Printer, Hewlett-Packard OfficeJet T Series lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver Ebtables v2.0 registered tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky PPP generic driver version 2.4.2 NET: Registered protocol family 24 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000ef20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000ef40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Getting cpuindex for acpiid 0x2 Linux video capture interface: v2.00 saa7146: register extension 'dvb'. ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 18 saa7146: found saa7146 @ mem f99b6000 (revision 1, irq 18) (0x13c2,0x0003). NET: Registered protocol family 8 NET: Registered protocol family 20 [ueagle-atm] driver ueagle 1.3 loaded usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) : Eagle I usb 2-2: reset full speed USB device using uhci_hcd and address 2 usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware usb 2-2: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw usbcore: registered new interface driver ueagle-atm DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). adapter has MAC addr = 00:d0:5c:23:85:9b dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 80002622 dvb-ttpci: firmware @ card 0 supports CI link layer interface dvb-ttpci: Crystal audio DAC @ card 0 detected saa7146_vv: saa7146 (0): registered device video0 [v4l2] saa7146_vv: saa7146 (0): registered device vbi0 [v4l2] usb 2-2: [ueagle-atm] firmware uploaded usb 2-2: USB disconnect, address 2 DVB: registering frontend 0 (ST STV0299 DVB-S)... input: DVB on-card IR receiver as /class/input/input2 dvb-ttpci: found av7110-0. bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 22 bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 22, latency: 64, mmio: 0xf7efe000 bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c bttv0: using: Pinnacle PCTV Sat [card=94,autodetected] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init] bttv0: using tuner=-1 bttv0: registered device video1 bttv0: registered device vbi1 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "dvb0" bt878: AUDIO driver version 0.0.0 loaded bt878: Bt878 AUDIO function found (0). ACPI: PCI Interrupt 0000:02:0c.1[A] -> GSI 20 (level, low) -> IRQ 22 bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions. bt878(0): Bt878 (rev 17) at 02:0c.1, irq: 22, latency: 64, memory: 0xf7eff000 DVB: registering new adapter (bttv0). DVB: registering frontend 1 (Conexant CX24110 DVB-S)... usb 2-2: new full speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) : Eagle I usb 2-2: reset full speed USB device using uhci_hcd and address 3 BUG: unable to handle kernel paging request at virtual address 74617473 printing eip: c018c5ab *pde = 00000000 Oops: 0000 [#1] PREEMPT Modules linked in: dvb_bt8xx bt878 dvb_pll cx24110 bttv ir_common compat_ioctl32 btcx_risc tveeprom stv0299 ves1x93 ueagle_atm usbatm atm dvb_ttpci ttpci_eeprom saa7146_vv video_buf videodev v4l1_compat v4l2_common saa7146 dvb_core processor button ohci_hcd uhci_hcd ehci_hcd usbcore iptable_nat ipt_MASQUERADE ip_nat ip_conntrack nfnetlink iptable_filter ip_tables x_tables pppoe pppox ppp_async ppp_generic slhc crc_ccitt tun ebtables ppdev parport_pc lp parport evdev psmouse CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010246 (2.6.19-rc1 #1) EIP is at sysfs_dirent_exist+0x4b/0x6f eax: f99e9573 ebx: f7e41a04 ecx: 00000004 edx: 00000004 esi: f99e9561 edi: 74617473 ebp: f55593e0 esp: f54b7c68 ds: 007b es: 007b ss: 0068 Process khubd (pid: 4078, ti=f54b7000 task=f54bc540 task.ti=f54b7000) Stack: 74617473 f99e948a f56fc714 00000000 f55593d4 c018bec6 00008124 00000004 00000004 c0117574 0000000f f553ba50 f54b7cc0 f56fc714 f99eae24 00000000 f99ead4c c018dab0 f56fc714 f553ba50 f5432180 00000000 f54d24e0 f99e800c Call Trace: [] sysfs_add_file+0x2e/0x70 [] nr_processes+0x4/0x6 [] sysfs_create_group+0x5b/0xcb [] uea_bind+0x215/0x53c [ueagle_atm] [] uea_kthread+0x0/0xb98 [ueagle_atm] [] uea_bind+0x0/0x53c [ueagle_atm] [] usbatm_usb_probe+0x109/0x7b2 [usbatm] [] uea_probe+0x73/0x17d [ueagle_atm] [] usb_probe_interface+0x56/0x83 [usbcore] [] really_probe+0x2e/0xbf [] driver_probe_device+0x3f/0x93 [] bus_for_each_drv+0x3e/0x5c [] device_attach+0x62/0x66 [] __device_attach+0x0/0x5 [] bus_attach_device+0x1e/0x3f [] device_add+0x3c6/0x476 [] usb_set_configuration+0x394/0x4b1 [usbcore] [] generic_probe+0x15c/0x223 [usbcore] [] usb_probe_device+0x33/0x38 [usbcore] [] really_probe+0x2e/0xbf [] driver_probe_device+0x3f/0x93 [] bus_for_each_drv+0x3e/0x5c [] device_attach+0x62/0x66 [] __device_attach+0x0/0x5 [] bus_attach_device+0x1e/0x3f [] device_add+0x3c6/0x476 [] usb_cache_string+0x7e/0x82 [usbcore] [] usb_new_device+0x5d/0xcb [usbcore] [] hub_thread+0x4d6/0xbc8 [usbcore] [] schedule+0x2b1/0x64a [] autoremove_wake_function+0x0/0x37 [] hub_thread+0x0/0xbc8 [usbcore] [] kthread+0xc9/0xcd [] kthread+0x0/0xcd [] kernel_thread_helper+0x7/0x1c ======================= Code: 16 eb 42 8b 5b 04 83 eb 04 8b 43 04 0f 18 00 90 8d 43 04 39 e8 74 2e 8b 43 14 85 c0 74 e5 89 d8 e8 6b ee ff ff 89 c6 8b 3c 24 ac 75 08 84 c0 75 f8 31 c0 eb 04 19 c0 0c 01 85 c0 75 c5 b8 ef EIP: [] sysfs_dirent_exist+0x4b/0x6f SS:ESP 0068:f54b7c68 <6>usb 2-2: [ueagle-atm] (re)booting started kjournald starting. Commit interval 5 seconds EXT3 FS on md0, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: md3: found reiserfs format "3.6" with standard journal ReiserFS: md3: using ordered data mode ReiserFS: md3: journal params: device md3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md3: checking transaction log (md3) ReiserFS: md3: Using r5 hash to sort names Adding 3904696k swap on /dev/md1. Priority:-1 extents:1 across:3904696k warning: process `touch' used the removed sysctl system call ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 50658 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 23 w83627hf 9191-0290: Reading VID from GPIO5 usb 2-2: [ueagle-atm] modem operational usb 2-2: [ueagle-atm] ATU-R firmware version : 40e4be96 usb 2-2: [ueagle-atm] setting new timeout 0 device eth0 entered promiscuous mode eth0: setting full-duplex. device eth1 entered promiscuous mode device eth2 entered promiscuous mode eth2: link down br1: port 2(eth1) entering learning state br1: port 1(eth0) entering learning state NET: Registered protocol family 17 br1: topology change detected, propagating br1: port 2(eth1) entering forwarding state br1: topology change detected, propagating br1: port 1(eth0) entering forwarding state process `named' is using obsolete setsockopt SO_BSDCOMPAT - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/