Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Sender: sibis=codeaurora.org@mg.codeaurora.org
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Wed, 24 Mar 2021 12:19:01 +0530
From:   Sibi Sankar <sibis@codeaurora.org>
To:     Stephen Boyd <swboyd@chromium.org>
Cc:     Bjorn Andersson <bjorn.andersson@linaro.org>,
        p.zabel@pengutronix.de, robh+dt@kernel.org, agross@kernel.org,
        mani@kernel.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 6/6] arm64: dts: qcom: sc7280: Add nodes to boot WPSS
In-Reply-To: <161653719350.3012082.12055201782488576903@swboyd.mtv.corp.google.com>
References: <1615269111-25559-1-git-send-email-sibis@codeaurora.org>
 <1615269111-25559-7-git-send-email-sibis@codeaurora.org>
 <161567197220.1478170.12600358804299446135@swboyd.mtv.corp.google.com>
 <YE2OJz1pI81Uj8DA@builder.lan>
 <161653719350.3012082.12055201782488576903@swboyd.mtv.corp.google.com>
Message-ID: <14476306c74356a747473e820d4067a6@codeaurora.org>
User-Agent: Roundcube Webmail/1.3.9
Precedence: bulk

On 2021-03-24 03:36, Stephen Boyd wrote:
> Quoting Bjorn Andersson (2021-03-13 20:16:39)
>> On Sat 13 Mar 15:46 CST 2021, Stephen Boyd wrote:
>> 
>> > Quoting Sibi Sankar (2021-03-08 21:51:51)
>> > > Add miscellaneous nodes to boot the Wireless Processor Subsystem on
>> >
>> > Maybe add (WPSS) after the name so we know they're related.
>> >
>> > > SC7280 SoCs.
>> > >
>> > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> > > ---
>> > >
>> > > https://patchwork.kernel.org/project/linux-arm-msm/list/?series=438217
>> > > Depends on ipcc dt node enablement from ^^
>> > >
>> > >  arch/arm64/boot/dts/qcom/sc7280.dtsi | 143 +++++++++++++++++++++++++++++++++++
>> > >  1 file changed, 143 insertions(+)
>> > >
>> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> > > index 18637c369c1d..4f03c468df51 100644
>> > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> > > @@ -244,12 +251,131 @@
>> > >                 reg = <0 0x80000000 0 0>;
>> > >         };
>> > >
>> > > +       tcsr_mutex: hwlock {
>> > > +               compatible = "qcom,tcsr-mutex";
>> > > +               syscon = <&tcsr_mutex_regs 0 0x1000>;
>> > > +               #hwlock-cells = <1>;
>> > > +       };
>> >
>> > Is this node in the right place? I think the node above it is 'memory'?
>> > In which case 'hwlock' comes before 'memory' alphabetically.
>> >
>> 
>> Thanks for spotting this, as it's no longer acceptable to have a
>> standalone "syscon" node I was asked to rewrite the binding for this a
>> few months ago. So the tcsr_mutex should now be represented with a reg
>> under /soc.
> 
> Oh nice, I wasn't aware.
> 
>> > > +                       #interrupt-cells = <2>;
>> > > +               };
>> > > +       };
>> > > +
>> > > +       smp2p-mpss {
>> > > +               compatible = "qcom,smp2p";
>> > > +               qcom,smem = <435>, <428>;
>> > > +               interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
>> > > +                                            IPCC_MPROC_SIGNAL_SMP2P
>> > > +                                            IRQ_TYPE_EDGE_RISING>;
>> > > +               mboxes = <&ipcc IPCC_CLIENT_MPSS
>> > > +                               IPCC_MPROC_SIGNAL_SMP2P>;
>> > > +
>> > > +               qcom,local-pid = <0>;
>> > > +               qcom,remote-pid = <1>;
>> > > +
>> > > +               modem_smp2p_out: master-kernel {
>> > > +                       qcom,entry-name = "master-kernel";
>> > > +                       #qcom,smem-state-cells = <1>;
>> > > +               };
>> > > +
>> > > +               modem_smp2p_in: slave-kernel {
>> > > +                       qcom,entry-name = "slave-kernel";
>> >
>> > Do these names need to have 'master' and 'slave' in them? We're trying
>> > to avoid these terms. See Documentation/process/coding-style.rst Section
>> > 4 naming.
>> >
>> 
>> They need to match the naming in the firmware, but I would welcome a
>> future change to something in line with the coding style and simply 
>> more
>> descriptive.
>> 
> 
> Sibi can this be done? I think it's still pretty early days for the
> firmware so hopefully the terms can be replaced with something
> different.

I'll discuss the ask with the modem fw team and
get back.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.