Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Roja Rani Yarubandi <rojay@codeaurora.org>
To:     agross@kernel.org, bjorn.andersson@linaro.org,
        gregkh@linuxfoundation.org, mka@chromium.org, robh+dt@kernel.org
Cc:     linux-serial@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Rajendra Nayak <rnayak@codeaurora.org>,
        akashast@codeaurora.org, msavaliy@qti.qualcomm.com,
        Roja Rani Yarubandi <rojay@codeaurora.org>
Subject: [RESEND PATCH V3 2/2] arm64: dts: qcom: sc7180: Remove QUP-CORE ICC path
Date:   Wed, 24 Mar 2021 15:48:36 +0530
Message-Id: <20210324101836.25272-3-rojay@codeaurora.org>
In-Reply-To: <20210324101836.25272-1-rojay@codeaurora.org>
References: <20210324101836.25272-1-rojay@codeaurora.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

We had introduced the QUP-CORE ICC path to put proxy votes from
QUP wrapper on behalf of earlycon, if other users of QUP-CORE turn
off this clock before the real console is probed, unclocked access
to HW was seen from earlycon.

With ICC sync state support proxy votes are no longer need as ICC
will ensure that the default bootloader votes are not removed until
all it's consumer are probed.

We can safely remove ICC path for QUP-CORE clock from QUP wrapper
device.

Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Signed-off-by: Akash Asthana <akashast@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in V3:
 - No change

Changes in V2:
 - No change

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 83fbb481cae5..2709051740d1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -768,8 +768,6 @@ qupv3_id_0: geniqup@8c0000 {
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x43 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>;
-			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c0: i2c@880000 {
@@ -1059,8 +1057,6 @@ qupv3_id_1: geniqup@ac0000 {
 			#size-cells = <2>;
 			ranges;
 			iommus = <&apps_smmu 0x4c3 0x0>;
-			interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>;
-			interconnect-names = "qup-core";
 			status = "disabled";
 
 			i2c6: i2c@a80000 {
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation