Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751291AbWJHSGd (ORCPT ); Sun, 8 Oct 2006 14:06:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751306AbWJHSGd (ORCPT ); Sun, 8 Oct 2006 14:06:33 -0400 Received: from 70-91-206-233-BusName-SFBA.hfc.comcastbusiness.net ([70.91.206.233]:41112 "EHLO saville.com") by vger.kernel.org with ESMTP id S1751291AbWJHSGb (ORCPT ); Sun, 8 Oct 2006 14:06:31 -0400 Message-ID: <45293E26.9020104@saville.com> Date: Sun, 08 Oct 2006 11:06:30 -0700 From: Wink Saville User-Agent: Thunderbird 1.5.0.7 (Windows/20060909) MIME-Version: 1.0 To: Andrew Morton CC: Arjan van de Ven , Matthias Hentges , linux-kernel@vger.kernel.org, linux-fbdev-devel@lists.sourceforge.net Subject: Re: Hang in fb_notifier_call_chain with nvidia framebuffer References: <45206777.7020405@saville.com> <1159808447.4652.6.camel@mhcln03> <4521E326.2000406@saville.com> <1159882225.2891.525.camel@laptopd505.fenrus.org> <4523E09C.9000609@saville.com> <20061007230129.323ac807.akpm@osdl.org> <4528B377.2050104@saville.com> <20061008020711.1e7b77c4.akpm@osdl.org> In-Reply-To: <20061008020711.1e7b77c4.akpm@osdl.org> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 61052 Lines: 2075 Andrew, No change, as you can see MB is still 0. nvGetClocks: arch=64 p4020=0xa4301000 p4024=0x00005303 M=3 N=83 MB=0 NB=0 P=0 Here is my log, config & diff. Maybe my configuration is wrong? This diff is against 2.6.19-rc1 as checked out this morning. Thanks, Wink [ 0.000000] Linux version 2.6.19-rc1-w8 (wink@winkc2d1) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #4 SMP Sun Oct 8 10:13:36 PDT 2006 [ 0.000000] Command line: root=/dev/sda2 ro splash initcall_debug console=tty0 console=ttyS0,115200n8 loglevel=7 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable) [ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524160 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000 [ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000 [ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000) [ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515368 [ 0.000000] Kernel command line: root=/dev/sda2 ro splash initcall_debug console=tty0 console=ttyS0,115200n8 loglevel=7 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 38.700028] Console: colour VGA+ 80x25 [ 38.965705] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 38.973543] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 38.981260] Checking aperture... [ 39.006736] Memory: 2058136k/2096640k available (3833k kernel code, 38088k reserved, 1431k data, 232k init) [ 39.093936] Calibrating delay using timer specific routine.. 4811.84 BogoMIPS (lpj=9623690) [ 39.102578] Mount-cache hash table entries: 256 [ 39.107335] CPU: L1 I cache: 32K, L1 D cache: 32K [ 39.112197] CPU: L2 cache: 4096K [ 39.115543] using mwait in idle threads. [ 39.119581] CPU: Physical Processor ID: 0 [ 39.123705] CPU: Processor Core ID: 0 [ 39.127489] CPU0: Thermal monitoring enabled (TM2) [ 39.132403] Freeing SMP alternatives: 40k freed [ 39.137065] ACPI: Core revision 20060707 [ 39.198053] Using local APIC timer interrupts. [ 39.255587] result 10208419 [ 39.258499] Detected 10.208 MHz APIC timer. [ 39.265635] Booting processor 1/2 APIC 0x1 [ 39.280372] Initializing CPU#1 [ 39.357366] Calibrating delay using timer specific routine.. 4808.57 BogoMIPS (lpj=9617148) [ 39.357371] CPU: L1 I cache: 32K, L1 D cache: 32K [ 39.357373] CPU: L2 cache: 4096K [ 39.357375] CPU: Physical Processor ID: 0 [ 39.357376] CPU: Processor Core ID: 1 [ 39.357380] CPU1: Thermal monitoring enabled (TM2) [ 39.357382] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 39.361374] Brought up 2 CPUs [ 39.403894] testing NMI watchdog ... OK. [ 39.447916] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. [ 39.454208] time.c: Detected 2404.211 MHz processor. [ 39.498905] migration_cost=19 [ 39.502329] Calling initcall 0xffffffff80748822: cpufreq_tsc+0x0/0x6a() [ 39.509142] Calling initcall 0xffffffff8074cbb7: init_smp_flush+0x0/0x53() [ 39.516215] Calling initcall 0xffffffff80752fa1: init_elf32_binfmt+0x0/0xc() [ 39.523460] Calling initcall 0xffffffff807546fa: helper_init+0x0/0x2e() [ 39.530281] Calling initcall 0xffffffff807549c2: pm_init+0x0/0x27() [ 39.536746] Calling initcall 0xffffffff80754de9: ksysfs_init+0x0/0x27() [ 39.543560] Calling initcall 0xffffffff80756f88: filelock_init+0x0/0x2e() [ 39.550551] Calling initcall 0xffffffff807579a5: init_misc_binfmt+0x0/0x35() [ 39.557800] Calling initcall 0xffffffff807579da: init_script_binfmt+0x0/0xc() [ 39.565124] Calling initcall 0xffffffff807579e6: init_elf_binfmt+0x0/0xc() [ 39.572190] Calling initcall 0xffffffff80761e95: init_cpufreq_transition_notifier_list+0x0/0x11() [ 39.581356] Calling initcall 0xffffffff80763a90: sock_init+0x0/0x57() [ 39.588003] Calling initcall 0xffffffff80764160: netlink_proto_init+0x0/0x164() [ 39.595611] NET: Registered protocol family 16 [ 39.600173] Calling initcall 0xffffffff8075a0d7: kobject_uevent_init+0x0/0x39() [ 39.607776] Calling initcall 0xffffffff8075a204: pcibus_class_init+0x0/0xc() [ 39.615023] Calling initcall 0xffffffff8075a9e7: pci_driver_init+0x0/0xc() [ 39.622100] Calling initcall 0xffffffff8075c277: dock_init+0x0/0x46() [ 39.628787] Calling initcall 0xffffffff8075d288: tty_class_init+0x0/0x27() [ 39.635857] Calling initcall 0xffffffff8075db59: vtconsole_class_init+0x0/0xb5() [ 39.643588] Calling initcall 0xffffffff8075ab27: acpi_pci_init+0x0/0x2d() [ 39.650580] ACPI: bus type pci registered [ 39.654700] Calling initcall 0xffffffff8075bb21: init_acpi_device_notify+0x0/0x48() [ 39.662653] Calling initcall 0xffffffff80762a75: pci_access_init+0x0/0x3c() [ 39.669826] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved [ 39.676374] PCI: Not using MMCONFIG. [ 39.680063] PCI: Using configuration type 1 [ 39.684362] Calling initcall 0xffffffff80751790: topology_init+0x0/0x2f() [ 39.691381] Calling initcall 0xffffffff807544ea: param_sysfs_init+0x0/0x187() [ 39.699744] Calling initcall 0xffffffff80245a51: pm_sysrq_init+0x0/0x17() [ 39.706739] Calling initcall 0xffffffff80757604: init_bio+0x0/0xff() [ 39.713338] Calling initcall 0xffffffff80759fc9: genhd_device_init+0x0/0x4d() [ 39.720700] Calling initcall 0xffffffff8075ab54: fbmem_init+0x0/0x92() [ 39.727435] Calling initcall 0xffffffff8075b93d: acpi_init+0x0/0x1e4() [ 39.742465] ACPI: Interpreter enabled [ 39.746617] ACPI: Using IOAPIC for interrupt routing [ 39.751736] Calling initcall 0xffffffff8075bc4c: acpi_ec_init+0x0/0x60() [ 39.758634] Calling initcall 0xffffffff8075c536: acpi_pci_root_init+0x0/0x27() [ 39.766155] Calling initcall 0xffffffff8075c622: acpi_pci_link_init+0x0/0x46() [ 39.773671] Calling initcall 0xffffffff8075c702: acpi_power_init+0x0/0x76() [ 39.780832] Calling initcall 0xffffffff8075c899: acpi_system_init+0x0/0xbd() [ 39.788079] Calling initcall 0xffffffff8075c956: acpi_event_init+0x0/0x3c() [ 39.795247] Calling initcall 0xffffffff8075c992: acpi_scan_init+0x0/0x1a5() [ 39.803211] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 39.809750] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 [ 39.816340] PCI: Transparent bridge - 0000:00:1e.0 [ 39.828402] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 39.836278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 39.844147] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 39.852014] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 39.859882] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 39.867752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 39.875621] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 39.887412] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15) [ 39.895159] Calling initcall 0xffffffff8075cca4: acpi_cm_sbs_init+0x0/0x3() [ 39.902311] Calling initcall 0xffffffff8075cca7: pnp_init+0x0/0x1e() [ 39.908858] Linux Plug and Play Support v0.97 (c) Adam Belay [ 39.914628] Calling initcall 0xffffffff8075ce08: pnpacpi_init+0x0/0x69() [ 39.921536] pnp: PnP ACPI init [ 39.927003] pnp: PnP ACPI: found 13 devices [ 39.931304] Calling initcall 0xffffffff8075d89f: misc_init+0x0/0x7d() [ 39.937954] Calling initcall 0xffffffff804988d0: cn_init+0x0/0xc8() [ 39.944441] Calling initcall 0xffffffff80760a72: init_scsi+0x0/0x82() [ 39.951173] SCSI subsystem initialized [ 39.955040] Calling initcall 0xffffffff807610f9: usb_init+0x0/0x103() [ 39.961716] usbcore: registered new interface driver usbfs [ 39.967338] usbcore: registered new interface driver hub [ 39.972789] usbcore: registered new device driver usb [ 39.977949] Calling initcall 0xffffffff80761437: serio_init+0x0/0xbc() [ 39.984694] Calling initcall 0xffffffff80761982: input_init+0x0/0x11b() [ 39.991508] Calling initcall 0xffffffff80761d69: rtc_init+0x0/0x3f() [ 39.998061] Calling initcall 0xffffffff80761da8: rtc_sysfs_init+0x0/0xc() [ 40.005434] Calling initcall 0xffffffff80761db4: rtc_proc_init+0x0/0xc() [ 40.012328] Calling initcall 0xffffffff80761dc0: rtc_dev_init+0x0/0xa4() [ 40.019229] Calling initcall 0xffffffff80761e64: i2c_init+0x0/0x31() [ 40.025815] Calling initcall 0xffffffff80762509: dma_bus_init+0x0/0x2a() [ 40.032712] Calling initcall 0xffffffff80762ab1: pci_acpi_init+0x0/0xa4() [ 40.039695] PCI: Using ACPI for IRQ routing [ 40.043991] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 40.052454] Calling initcall 0xffffffff80762b55: pci_legacy_init+0x0/0x120() [ 40.059698] Calling initcall 0xffffffff80762fe4: pcibios_irq_init+0x0/0x49b() [ 40.067024] Calling initcall 0xffffffff8076347f: pcibios_init+0x0/0x66() [ 40.073981] Calling initcall 0xffffffff80763b3c: proto_init+0x0/0x33() [ 40.080705] Calling initcall 0xffffffff80763c81: net_dev_init+0x0/0x22b() [ 40.087696] Calling initcall 0xffffffff807642c4: genl_init+0x0/0xa6() [ 40.094335] Calling initcall 0xffffffff8074890a: late_hpet_init+0x0/0xb2() [ 40.101415] Calling initcall 0xffffffff8074b411: pci_iommu_init+0x0/0xf() [ 40.108407] PCI-GART: No AMD northbridge found. [ 40.113050] Calling initcall 0xffffffff80756f1e: init_pipe_fs+0x0/0x40() [ 40.119951] Calling initcall 0xffffffff8075cb71: acpi_motherboard_init+0x0/0x133() [ 40.128392] Calling initcall 0xffffffff8075cda9: pnp_system_init+0x0/0xc() [ 40.135482] pnp: 00:06: ioport range 0x290-0x297 has been reserved [ 40.141784] Calling initcall 0xffffffff8075d1a2: chr_dev_init+0x0/0x82() [ 40.148847] Calling initcall 0xffffffff8075f813: firmware_class_init+0x0/0x68() [ 40.156460] Calling initcall 0xffffffff80761f39: cpufreq_gov_performance_init+0x0/0xc() [ 40.164758] Calling initcall 0xffffffff80761f51: cpufreq_gov_userspace_init+0x0/0x1c() [ 40.172965] Calling initcall 0xffffffff80762541: pcibios_assign_resources+0x0/0x81() [ 40.181014] PCI: Bridge: 0000:00:01.0 [ 40.184791] IO window: c000-cfff [ 40.188312] MEM window: faa00000-feafffff [ 40.192609] PREFETCH window: cff00000-efefffff [ 40.197339] PCI: Bridge: 0000:00:1c.0 [ 40.201116] IO window: disabled. [ 40.204637] MEM window: disabled. [ 40.208244] PREFETCH window: cfe00000-cfefffff [ 40.212976] PCI: Bridge: 0000:00:1c.3 [ 40.216752] IO window: b000-bfff [ 40.220274] MEM window: fa900000-fa9fffff [ 40.224572] PREFETCH window: disabled. [ 40.228610] PCI: Bridge: 0000:00:1c.4 [ 40.232387] IO window: a000-afff [ 40.235909] MEM window: fa800000-fa8fffff [ 40.240205] PREFETCH window: disabled. [ 40.244245] PCI: Bridge: 0000:00:1e.0 [ 40.248022] IO window: disabled. [ 40.251544] MEM window: fa700000-fa7fffff [ 40.255842] PREFETCH window: disabled. [ 40.260277] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.267936] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.275598] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19 [ 40.283258] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 40.290917] Calling initcall 0xffffffff80764bad: inet_init+0x0/0x3cb() [ 40.297652] NET: Registered protocol family 2 [ 40.325140] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 40.332523] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 40.341765] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 40.349185] TCP: Hash tables configured (established 262144 bind 65536) [ 40.355903] TCP reno registered [ 40.359204] Calling initcall 0xffffffff8020cd31: time_init_device+0x0/0x22() [ 40.366529] Calling initcall 0xffffffff80749b41: init_timer_sysfs+0x0/0x22() [ 40.373802] Calling initcall 0xffffffff80749b21: i8259A_init_sysfs+0x0/0x20() [ 40.381157] Calling initcall 0xffffffff8074a039: vsyscall_init+0x0/0x98() [ 40.388150] Calling initcall 0xffffffff8074a605: sbf_init+0x0/0xd0() [ 40.394698] Calling initcall 0xffffffff8074b1a4: i8237A_init_sysfs+0x0/0x20() [ 40.402053] Calling initcall 0xffffffff8074b611: mce_init_device+0x0/0x148() [ 40.409367] Calling initcall 0xffffffff8074b52f: periodic_mcheck_init+0x0/0x24() [ 40.417061] Calling initcall 0xffffffff8074b7ca: thermal_throttle_init_device+0x0/0x49() [ 40.425449] Calling initcall 0xffffffff8074bbfa: threshold_init_device+0x0/0x30c() [ 40.433309] Calling initcall 0xffffffff8074c99f: msr_init+0x0/0x10c() [ 40.439987] Calling initcall 0xffffffff8074caab: cpuid_init+0x0/0x10c() [ 40.446838] Calling initcall 0xffffffff8074dcae: init_lapic_sysfs+0x0/0x31() [ 40.454101] Calling initcall 0xffffffff8074e870: ioapic_init_sysfs+0x0/0xa7() [ 40.461457] Calling initcall 0xffffffff80751649: audit_classes_init+0x0/0x8a() [ 40.468974] Calling initcall 0xffffffff80752139: cache_sysfs_init+0x0/0x46() [ 40.476386] Calling initcall 0xffffffff807523cd: x8664_sysctl_init+0x0/0x16() [ 40.483727] Calling initcall 0xffffffff80752c81: aes_init+0x0/0x320() [ 40.490384] Calling initcall 0xffffffff80752fad: ia32_binfmt_init+0x0/0x18() [ 40.497633] Calling initcall 0xffffffff80752fc5: init_syscall32+0x0/0x59() [ 40.504707] Calling initcall 0xffffffff8075301e: init_aout_binfmt+0x0/0xc() [ 40.511864] Calling initcall 0xffffffff80753a91: create_proc_profile+0x0/0x258() [ 40.519958] Calling initcall 0xffffffff80753e4d: ioresources_init+0x0/0x40() [ 40.527207] Calling initcall 0xffffffff80753f7b: timekeeping_init_device+0x0/0x20() [ 40.535179] Calling initcall 0xffffffff807541b8: uid_cache_init+0x0/0x88() [ 40.542269] Calling initcall 0xffffffff80754671: init_posix_timers+0x0/0x89() [ 40.549605] Calling initcall 0xffffffff80754728: init_posix_cpu_timers+0x0/0x5e() [ 40.557386] Calling initcall 0xffffffff807547f6: latency_init+0x0/0x22() [ 40.564286] Calling initcall 0xffffffff80754825: init_clocksource_sysfs+0x0/0x50() [ 40.572168] Calling initcall 0xffffffff807548fd: init_jiffies_clocksource+0x0/0xc() [ 40.580120] Calling initcall 0xffffffff80754909: init+0x0/0x63() [ 40.586330] Calling initcall 0xffffffff8075496c: proc_dma_init+0x0/0x22() [ 40.593317] Calling initcall 0xffffffff80241fb3: percpu_modinit+0x0/0x73() [ 40.600389] Calling initcall 0xffffffff8075499d: kallsyms_init+0x0/0x25() [ 40.607368] Calling initcall 0xffffffff807549e9: crash_notes_memory_init+0x0/0x3c() [ 40.615317] Calling initcall 0xffffffff80754b57: ikconfig_init+0x0/0x3b() [ 40.622304] Calling initcall 0xffffffff80754c01: audit_init+0x0/0x116() [ 40.629117] audit: initializing netlink socket (disabled) [ 40.634631] audit(1160327843.480:1): initialized [ 40.639362] Calling initcall 0xffffffff80754d96: init_kprobes+0x0/0x53() [ 40.646266] Calling initcall 0xffffffff80755e81: init_per_zone_pages_min+0x0/0x3e() [ 40.654222] Calling initcall 0xffffffff80756767: pdflush_init+0x0/0x13() [ 40.661141] Calling initcall 0xffffffff80756795: kswapd_init+0x0/0x1a() [ 40.667970] Calling initcall 0xffffffff807567af: setup_vmstat+0x0/0x16() [ 40.674865] Calling initcall 0xffffffff80756823: procswaps_init+0x0/0x23() [ 40.681937] Calling initcall 0xffffffff80756846: init_tmpfs+0x0/0xc0() [ 40.688666] Calling initcall 0xffffffff80756906: cpucache_init+0x0/0x2f() [ 40.695653] Calling initcall 0xffffffff80756f5e: fasync_init+0x0/0x2a() [ 40.702469] Calling initcall 0xffffffff80757553: aio_setup+0x0/0x64() [ 40.709131] Calling initcall 0xffffffff8075777b: inotify_setup+0x0/0xd() [ 40.716027] Calling initcall 0xffffffff80757788: inotify_user_setup+0x0/0xbb() [ 40.723558] Calling initcall 0xffffffff80757843: eventpoll_init+0x0/0xd0() [ 40.730639] Calling initcall 0xffffffff80757913: init_sys32_ioctl+0x0/0x92() [ 40.737893] Calling initcall 0xffffffff807579f2: init_mbcache+0x0/0x1d() [ 40.744788] Calling initcall 0xffffffff80757a0f: dquot_init+0x0/0xe9() [ 40.751507] VFS: Disk quotas dquot_6.5.1 [ 40.755558] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 40.762107] Calling initcall 0xffffffff80757af8: dnotify_init+0x0/0x2a() [ 40.769443] Calling initcall 0xffffffff80757f71: configfs_init+0x0/0x91() [ 40.776436] Calling initcall 0xffffffff80758002: init_devpts_fs+0x0/0x33() [ 40.783507] Calling initcall 0xffffffff80758035: init_reiserfs_fs+0x0/0x8e() [ 40.790755] Calling initcall 0xffffffff807581d9: init_ext3_fs+0x0/0x63() [ 40.797660] Calling initcall 0xffffffff807582e8: journal_init+0x0/0xbb() [ 40.804573] Calling initcall 0xffffffff807583a3: init_ext2_fs+0x0/0x63() [ 40.811480] Calling initcall 0xffffffff80758438: init_cramfs_fs+0x0/0x27() [ 40.818556] Calling initcall 0xffffffff8075845f: init_ramfs_fs+0x0/0xc() [ 40.825452] Calling initcall 0xffffffff807584ac: init_fat_fs+0x0/0x48() [ 40.832265] Calling initcall 0xffffffff807584f4: init_msdos_fs+0x0/0xc() [ 40.839159] Calling initcall 0xffffffff80758500: init_vfat_fs+0x0/0xc() [ 40.845966] Calling initcall 0xffffffff8075850c: init_iso9660_fs+0x0/0x65() [ 40.853130] Calling initcall 0xffffffff80758695: init_nfs_fs+0x0/0xbe() [ 40.859973] Calling initcall 0xffffffff807588ff: init_nfsd+0x0/0xa3() [ 40.866607] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 40.873189] Calling initcall 0xffffffff807589a2: init_nlm+0x0/0x21() [ 40.879747] Calling initcall 0xffffffff807589c3: init_nls_ascii+0x0/0xc() [ 40.886729] Calling initcall 0xffffffff807589cf: init_nls_utf8+0x0/0x1f() [ 40.893708] Calling initcall 0xffffffff807589ee: init_smb_fs+0x0/0x65() [ 40.900522] Calling initcall 0xffffffff80758a53: init_cifs+0x0/0x4f8() [ 40.907301] Calling initcall 0xffffffff80758f4b: init_romfs_fs+0x0/0x53() [ 40.914286] Calling initcall 0xffffffff80758f9e: init_autofs_fs+0x0/0xc() [ 40.921270] Calling initcall 0xffffffff80758faa: init_autofs4_fs+0x0/0xc() [ 40.928342] initcall at 0xffffffff80758faa: init_autofs4_fs+0x0/0xc(): returned with error code -16 [ 40.940275] Calling initcall 0xffffffff80759005: fuse_init+0x0/0x10a() [ 40.946994] fuse init (API version 7.7) [ 40.950983] Calling initcall 0xffffffff8075911b: init_udf_fs+0x0/0x53() [ 40.957801] Calling initcall 0xffffffff8075916e: init_jfs_fs+0x0/0x1c7() [ 40.964708] JFS: nTxBlock = 8192, nTxLock = 65536 [ 40.972792] Calling initcall 0xffffffff8075948e: init_xfs_fs+0x0/0x115() [ 40.979691] SGI XFS with ACLs, large block/inode numbers, no debug enabled [ 40.986819] SGI XFS Quota Management subsystem [ 40.991383] Calling initcall 0xffffffff807595a3: ipc_init+0x0/0x14() [ 40.997934] Calling initcall 0xffffffff807597e7: init_mqueue_fs+0x0/0xcd() [ 41.005030] Calling initcall 0xffffffff80759a0e: key_proc_init+0x0/0x52() [ 41.012016] Calling initcall 0xffffffff80759a60: crypto_algapi_init+0x0/0xa() [ 41.019349] Calling initcall 0xffffffff80759a8a: cryptomgr_init+0x0/0xc() [ 41.026751] Calling initcall 0xffffffff80759a96: hmac_module_init+0x0/0xc() [ 41.033903] Calling initcall 0xffffffff80759aa2: init+0x0/0x53() [ 41.040105] Calling initcall 0xffffffff80759af5: init+0x0/0xc() [ 41.046225] Calling initcall 0xffffffff80759b01: init+0x0/0xc() [ 41.052339] Calling initcall 0xffffffff80759b0d: init+0x0/0xc() [ 41.058454] Calling initcall 0xffffffff80759b19: init+0x0/0x35() [ 41.064664] Calling initcall 0xffffffff80759b4e: aes_init+0x0/0x322() [ 41.071319] Calling initcall 0xffffffff80759e70: init+0x0/0xc() [ 41.077436] Calling initcall 0xffffffff8075a016: noop_init+0x0/0xc() [ 41.083990] io scheduler noop registered [ 41.088072] Calling initcall 0xffffffff8075a022: as_init+0x0/0xc() [ 41.094452] io scheduler anticipatory registered (default) [ 41.100136] Calling initcall 0xffffffff8075a02e: deadline_init+0x0/0xc() [ 41.107035] io scheduler deadline registered [ 41.111462] Calling initcall 0xffffffff8075a03a: cfq_init+0x0/0x9d() [ 41.118017] io scheduler cfq registered [ 41.122004] Calling initcall 0xffffffff80429db3: pci_init+0x0/0x2b() [ 41.130429] Calling initcall 0xffffffff8075a9f3: pci_sysfs_init+0x0/0x34() [ 41.137551] Calling initcall 0xffffffff8075aa27: pci_proc_init+0x0/0x68() [ 41.144550] Calling initcall 0xffffffff8075aa8f: pcie_portdrv_init+0x0/0x3b() [ 41.151969] assign_interrupt_mode Found MSI capability [ 41.157341] assign_interrupt_mode Found MSI capability [ 41.162744] assign_interrupt_mode Found MSI capability [ 41.168121] assign_interrupt_mode Found MSI capability [ 41.173464] Calling initcall 0xffffffff8075aaca: aer_service_init+0x0/0xc() [ 41.180636] Calling initcall 0xffffffff8075aeb0: fb_console_init+0x0/0x110() [ 41.187894] Calling initcall 0xffffffff80440aea: nvidiafb_init+0x0/0x22a() [ 41.194995] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 41.202657] nvidiafb: Device ID: 10de0391 [ 41.221616] nvidiafb: CRTC0 analog found [ 41.241421] nvidiafb: CRTC1 analog not found [ 41.261958] nvidiafb: EDID found from BUS1 [ 41.380769] nvidiafb: EDID found from BUS2 [ 41.384985] nvidiafb: CRTC 0 appears to have a CRT attached [ 41.390665] nvidiafb: Using CRT on CRTC 0 nvGetClocks: arch=64 p4020=0xa4301000 p4024=0x00005303 M=3 N=83 MB=0 NB=0 P=0 # # Automatically generated make config: don't edit # Linux kernel version: 2.6.19-rc1 # Sun Oct 8 09:20:42 2006 # CONFIG_X86_64=y CONFIG_64BIT=y CONFIG_X86=y CONFIG_ZONE_DMA32=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_X86_CMPXCHG=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_DMI=y CONFIG_AUDIT_ARCH=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="-w8" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y CONFIG_STOP_MACHINE=y # # Block layer # CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VSMP is not set # CONFIG_MK8 is not set CONFIG_MPSC=y # CONFIG_GENERIC_CPU is not set CONFIG_X86_L1_CACHE_BYTES=128 CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_INTERNODE_CACHE_BYTES=128 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y # CONFIG_MICROCODE is not set CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_X86_HT=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y # CONFIG_MTRR is not set CONFIG_SMP=y # CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_PREEMPT_BKL=y # CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_NR_CPUS=4 # CONFIG_HOTPLUG_CPU is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_HPET_TIMER=y # CONFIG_HPET_EMULATE_RTC is not set CONFIG_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x200000 CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_REORDER is not set CONFIG_K8_NB=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ISA_DMA_API=y CONFIG_GENERIC_PENDING_IRQ=y # # Power management options # CONFIG_PM=y CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set # CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=y CONFIG_ACPI_HOTKEY=y CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_IBM is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_CUSTOM_DSDT is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_SBS is not set # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # CPUFreq processor drivers # # CONFIG_X86_POWERNOW_K8 is not set CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y CONFIG_X86_ACPI_CPUFREQ=y # # shared options # # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set # CONFIG_X86_SPEEDSTEP_LIB is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y CONFIG_PCI_MSI=y # CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set CONFIG_HT_IRQ=y # # PCCARD (PCMCIA/CardBus) support # # CONFIG_PCCARD is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y # # Networking # CONFIG_NET=y # # Networking options # # CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set CONFIG_XFRM_SUB_POLICY=y CONFIG_NET_KEY=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # # DCCP Configuration (EXPERIMENTAL) # # CONFIG_IP_DCCP is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IP_SCTP=y # CONFIG_SCTP_DBG_MSG is not set # CONFIG_SCTP_DBG_OBJCNT is not set # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y # # TIPC Configuration (EXPERIMENTAL) # # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set # # Device Drivers # # # Generic Driver Options # # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_PNPACPI=y # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=y CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set # CONFIG_ATA_OVER_ETH is not set # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_ATIIXP is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_RAID_ATTRS=y CONFIG_SCSI=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set CONFIG_SCSI_EATA=y CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # # Serial ATA (prod) and Parallel ATA (experimental) drivers # CONFIG_ATA=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SVW is not set CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set CONFIG_SATA_PROMISE=y # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set CONFIG_SATA_INTEL_COMBINED=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_JMICRON=y # CONFIG_PATA_TRIFLEX is not set CONFIG_PATA_MPIIX=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Network device support # CONFIG_NETDEVICES=y CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # ARCnet devices # # CONFIG_ARCNET is not set # # PHY device support # # # Ethernet (10 or 100Mbit) # # CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set CONFIG_SKY2=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # # Token Ring devices # # CONFIG_TR is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Wan interfaces # # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # # CONFIG_ISDN is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_XTKBD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_CT82C710=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_PCIPS2=y CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=y # CONFIG_TIPAR is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_MWAVE is not set # CONFIG_PC8736x_GPIO is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y # CONFIG_HPET_RTC_IRQ is not set CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y # # TPM devices # # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set # # I2C support # CONFIG_I2C=y # CONFIG_I2C_CHARDEV is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # # CONFIG_W1 is not set # # Hardware Monitoring support # # CONFIG_HWMON is not set # CONFIG_HWMON_VID is not set # # Misc devices # # CONFIG_IBM_ASM is not set # CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # CONFIG_USB_DABUSB is not set # # Graphics support # CONFIG_FIRMWARE_EDID=y CONFIG_FB=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set # CONFIG_FB_VESA is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y # CONFIG_FB_RIVA is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # # CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # # USB Input Devices # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_MON is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # # USB DSL modem support # # # USB Gadget Support # # CONFIG_USB_GADGET is not set # # MMC/SD Card support # # CONFIG_MMC is not set # # LED devices # # CONFIG_NEW_LEDS is not set # # LED drivers # # # LED Triggers # # # InfiniBand support # # CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # CONFIG_EDAC is not set # # Real Time Clock # CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # # RTC drivers # # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_TEST is not set # CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support # CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y # # DMA Devices # CONFIG_INTEL_IOATDMA=y # # Firmware Drivers # # CONFIG_EDD is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y CONFIG_JFS_FS=y CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_DIRECTIO=y CONFIG_NFSD=y CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=y # CONFIG_CIFS_STATS is not set # CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set # CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y # CONFIG_ACORN_PARTITION_ADFS is not set # CONFIG_ACORN_PARTITION_POWERTEC is not set CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Distributed Lock Manager # # CONFIG_DLM is not set # # Instrumentation Support # CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_KPROBES=y # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=15 # CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set # CONFIG_DEBUG_RODATA is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=y CONFIG_CRYPTO_CAST5=y # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_TEST is not set # # Hardware crypto devices # # # Library routines # CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e34bd03..60df916 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -2247,6 +2247,22 @@ static void serial8250_console_putchar(s serial_out(up, UART_TX, ch); } +void lldb_wrch(int port_idx, char ch) +{ + serial8250_console_putchar((struct uart_port *)&serial8250_ports[port_idx], ch); +} +EXPORT_SYMBOL(lldb_wrch); + +void lldb_wrstr(int port_idx, const char *str) +{ + int ch; + + while((ch = *str++)) { + lldb_wrch(port_idx, ch); + } +} +EXPORT_SYMBOL(lldb_wrstr); + /* * Print a string to the serial port trying not to disturb * any possible real use of the port... diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index daaa486..7a43020 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -701,7 +701,6 @@ config FB_NVIDIA depends on FB && PCI select I2C_ALGOBIT if FB_NVIDIA_I2C select I2C if FB_NVIDIA_I2C - select FB_DDC if FB_NVIDIA_I2C select FB_MODE_HELPERS select FB_CFB_FILLRECT select FB_CFB_COPYAREA diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c index 9ed640d..c075516 100644 --- a/drivers/video/nvidia/nv_hw.c +++ b/drivers/video/nvidia/nv_hw.c @@ -54,6 +54,8 @@ #include "nv_type.h" #include "nv_local.h" #include "nv_proto.h" +#include + void NVLockUnlock(struct nvidia_par *par, int Lock) { u8 cr11; @@ -141,16 +143,21 @@ typedef struct { static void nvGetClocks(struct nvidia_par *par, unsigned int *MClk, unsigned int *NVClk) { - unsigned int pll, N, M, MB, NB, P; + unsigned int pll, N, M, MB, NB, P, p4020; + char buf[200]; if (par->Architecture >= NV_ARCH_40) { pll = NV_RD32(par->PMC, 0x4020); + p4020 = pll; P = (pll >> 16) & 0x03; pll = NV_RD32(par->PMC, 0x4024); M = pll & 0xFF; N = (pll >> 8) & 0xFF; MB = (pll >> 16) & 0xFF; NB = (pll >> 24) & 0xFF; + snprintf(buf, sizeof(buf), "\r\nnvGetClocks: arch=%d p4020=0x%08x p4024=0x%08x M=%d N=%d MB=%d NB=%d P=%d", + par->Architecture, p4020, pll, M, N, MB, NB, P); + LLDB_WRSTR(buf); *MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P; pll = NV_RD32(par->PMC, 0x4000); diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index e48de3c..19eef3a 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -160,12 +160,51 @@ void nvidia_delete_i2c_busses(struct nvi } +static u8 *nvidia_do_probe_i2c_edid(struct nvidia_i2c_chan *chan) +{ + u8 start = 0x0; + struct i2c_msg msgs[] = { + { + .addr = 0x50, + .len = 1, + .buf = &start, + }, { + .addr = 0x50, + .flags = I2C_M_RD, + .len = EDID_LENGTH, + }, + }; + u8 *buf; + + if (!chan->par) + return NULL; + + buf = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!buf) { + dev_warn(&chan->par->pci_dev->dev, "Out of memory!\n"); + return NULL; + } + msgs[1].buf = buf; + + if (i2c_transfer(&chan->adapter, msgs, 2) == 2) + return buf; + dev_dbg(&chan->par->pci_dev->dev, "Unable to read EDID block.\n"); + kfree(buf); + return NULL; +} + int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid) { struct nvidia_par *par = info->par; - u8 *edid; - - edid = fb_ddc_read(&par->chan[conn - 1].adapter); + u8 *edid = NULL; + int i; + + for (i = 0; i < 3; i++) { + /* Do the real work */ + edid = nvidia_do_probe_i2c_edid(&par->chan[conn - 1]); + if (edid) + break; + } if (!edid && conn == 1) { /* try to get from firmware */ diff --git a/include/linux/lldb.h b/include/linux/lldb.h new file mode 100644 index 0000000..728b990 --- /dev/null +++ b/include/linux/lldb.h @@ -0,0 +1,19 @@ +/* + * include/linux/lldb.h + * + * Low Level Debug capability. + * An implementation is in 8250.c which writes directly to a serial port. + * + * (C) Copyright 2006 Wink Saville + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 + */ + +extern void lldb_wrch(int port_idx, char ch); +extern void lldb_wrstr(int port_idx, const char * str); + +#define LLDB_WRCH(ch) lldb_wrch(0, ch) +#define LLDB_WRSTR(str) lldb_wrstr(0, str) + - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/