Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 26 Mar 2021 08:19:07 +0100
From:   Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>
To:     Kishon Vijay Abraham I <kishon@ti.com>
Cc:     Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Marc Zyngier <maz@kernel.org>, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org,
        Lokesh Vutla <lokeshvutla@ti.com>
Subject: Re: [PATCH 6/6] PCI: keystone: Add workaround for Errata #i2037
 (AM65x SR 1.0)
Message-ID: <YF2K6+R1P3SNUoo5@rocinante>
References: <20210325090026.8843-1-kishon@ti.com>
 <20210325090026.8843-7-kishon@ti.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20210325090026.8843-7-kishon@ti.com>
Precedence: bulk

Hi Kishon,

A few small nitpicks.

> Errata #i2037 in AM65x/DRA80xM Processors Silicon Revision 1.0
> (SPRZ452D–July 2018–Revised December 2019 [1]) mentions when an
> inbound PCIe TLP spans more than two internal AXI 128-byte bursts,
> the bus may corrupt the packet payload and the corrupt data may
> cause associated applications or the processor to hang.
> 
> The workaround for Errata #i2037 is to limit the maximum read
> request size and maximum payload size to 128 Bytes. Add workaround
> for Errata #i2037 here. The errata and workaround is applicable
> only to AM65x SR 1.0 and later versions of the silicon will have
> this fixed.

I think it would be either "128 B" or "128 bytes", there is no need to
capitalise bytes.

[...]
> +	/*
> +	 * Memory transactions fail with PCI controller in AM654 PG1.0
> +	 * when MRRS is set to more than 128 Bytes. Force the MRRS to
> +	 * 128 Bytes in all downstream devices.
> +	 */

Same here, it would be "128 bytes" in the comment above.

[...]
> +		if (pcie_get_readrq(dev) > 128) {
> +			dev_info(&dev->dev, "limiting MRRS to 128\n");
> +			pcie_set_readrq(dev, 128);
> +		}
[...]

Might be nice to add unit here, so "128 bytes".

Krzysztof