Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Stefan Riedmueller <s.riedmueller@phytec.de>
To:     Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>
Cc:     Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org,
        Stefan Riedmueller <s.riedmueller@phytec.de>
Subject: [PATCH 1/3] ARM: dts: imx6: pfla02: Fix USB vbus enable pinmuxing
Date:   Mon, 29 Mar 2021 13:28:17 +0200
Message-Id: <20210329112819.64043-1-s.riedmueller@phytec.de>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

The pinmuxing for the enable pin of the usbh1 node is wrong. It needs to
be muxed as GPIO. While at it, move the pinctrl to the vbus regulator
since it is actually the regulator enable pin.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
---
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/d=
ts/imx6qdl-phytec-pfla02.dtsi
index 7a1e53195785..995e99952aca 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,8 @@ reg=5Fusb=5Fotg=5Fvbus: regulator@0 {
=20
 		reg=5Fusb=5Fh1=5Fvbus: regulator@1 {
 			compatible =3D "regulator-fixed";
+			pinctrl-names =3D "default";
+			pinctrl-0 =3D <&pinctrl=5Fusbh1=5Fvbus>;
 			reg =3D <1>;
 			regulator-name =3D "usb=5Fh1=5Fvbus";
 			regulator-min-microvolt =3D <5000000>;
@@ -328,9 +330,9 @@ MX6QDL=5FPAD=5FKEY=5FROW0=5F=5FUART4=5FRX=5FDATA	0x1b0b1
 			>;
 		};
=20
-		pinctrl=5Fusbh1: usbh1grp {
+		pinctrl=5Fusbh1=5Fvbus: usbh1vbusgrp {
 			fsl,pins =3D <
-				MX6QDL=5FPAD=5FGPIO=5F0=5F=5FUSB=5FH1=5FPWR		0x80000000
+				MX6QDL=5FPAD=5FGPIO=5F0=5F=5FGPIO1=5FIO00		0x80000000
 			>;
 		};
=20
@@ -415,8 +417,6 @@ &uart4 {
=20
 &usbh1 {
 	vbus-supply =3D <&reg=5Fusb=5Fh1=5Fvbus>;
-	pinctrl-names =3D "default";
-	pinctrl-0 =3D <&pinctrl=5Fusbh1>;
 	status =3D "disabled";
 };
=20
--=20
2.25.1