Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Stefan Riedmueller <s.riedmueller@phytec.de>
To:     Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>
Cc:     Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org,
        Stefan Riedmueller <s.riedmueller@phytec.de>
Subject: [PATCH v2 3/3] ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
Date:   Mon, 29 Mar 2021 15:01:03 +0200
Message-Id: <20210329130103.65857-3-s.riedmueller@phytec.de>
In-Reply-To: <20210329130103.65857-1-s.riedmueller@phytec.de>
References: <20210329130103.65857-1-s.riedmueller@phytec.de>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Setting the vmmc supplies is crucial since otherwise the supplying
regulators get disabled and the SD interfaces are no longer powered
which leads to system failures if the system is booted from that SD
interface.

Fixes: 1e44d3f880d5 ("ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on =
Phytec phyFLEX-i.MX6 Ouad module")

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
Changes in v2:
 - Added fixes tag
 - Added reviewed-by

 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/d=
ts/imx6qdl-phytec-pfla02.dtsi
index 9f39c926cc08..cafbd3d1064d 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -433,6 +433,7 @@ &usdhc2 {
 	pinctrl-0 =3D <&pinctrl=5Fusdhc2>;
 	cd-gpios =3D <&gpio1 4 GPIO=5FACTIVE=5FLOW>;
 	wp-gpios =3D <&gpio1 2 GPIO=5FACTIVE=5FHIGH>;
+	vmmc-supply =3D <&vdd=5Fsd1=5Freg>;
 	status =3D "disabled";
 };
=20
@@ -442,5 +443,6 @@ &usdhc3 {
 		     &pinctrl=5Fusdhc3=5Fcdwp>;
 	cd-gpios =3D <&gpio1 27 GPIO=5FACTIVE=5FLOW>;
 	wp-gpios =3D <&gpio1 29 GPIO=5FACTIVE=5FHIGH>;
+	vmmc-supply =3D <&vdd=5Fsd0=5Freg>;
 	status =3D "disabled";
 };
--=20
2.25.1