Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Stefan Riedmueller <s.riedmueller@phytec.de>
To:     Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
        Sascha Hauer <s.hauer@pengutronix.de>
Cc:     Pengutronix Kernel Team <kernel@pengutronix.de>,
        Fabio Estevam <festevam@gmail.com>,
        NXP Linux Team <linux-imx@nxp.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org,
        Stefan Riedmueller <s.riedmueller@phytec.de>
Subject: [PATCH v2 2/3] ARM: dts: imx6: pbab01: Set USB OTG port to peripheral
Date:   Mon, 29 Mar 2021 15:01:02 +0200
Message-Id: <20210329130103.65857-2-s.riedmueller@phytec.de>
In-Reply-To: <20210329130103.65857-1-s.riedmueller@phytec.de>
References: <20210329130103.65857-1-s.riedmueller@phytec.de>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Due to a hardware bug preventing the correct detection if the ID pin
the USB OTG port cannot be used in otg mode. It can either be set to
host or peripheral. Set it to peripheral so vbus is disabled by default.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
---
Changes in v2:
 - Added reviewed-by

 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/d=
ts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..b2f78b4362cb 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -164,6 +164,7 @@ &usbh1 {
=20
 &usbotg {
 	status =3D "okay";
+	dr=5Fmode =3D "peripheral";
 };
=20
 &usdhc2 {
--=20
2.25.1