Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: GUkXIJM3mkchZDfH9F+RWfBOhp+7E8rwWw6eCe32nyYqv4Zy8eJ6v1fX3GRFOUg+w88IDx2mfG
 YEt8x8QKkZ3db0YYKNCy/xPjf3EdKX7Nja7+24SuI0iUo9PADc46nGVXEEnA1812iyOBHbml0b
 T+2lJ2BjnmMlbymcMGujvwHbqUHNT3mqc3swJ5zVa5vWmTiljZmwv1EkSwcA/YEbbFRsrZy8H/
 teQHRra5nHD0WVRIkNILbxNi93zBOvhyEJPAyQTMfK896IQZTunjZy56M4KMNEcc+jKMSQbwL9
 MVk=
IronPort-SDR: 9GAV4CF6YMvdhypyV/QochEJ/i7wkYujJyWsIPcci1wygSNEUGNyw2WAsstPKE5MBYuPmMgiba
 IXYKNrBy+LVWgaSqWaaPhUy0QroLLKDM4P1EjJSqMxLjfPI+zVxtqchWuSjQNCIj6X6FQrVFNU
 6jsSv1z54bEMHG/fBOHLVOrBCLJS1zlorKS1rc+0o1M1RuT0bt6uWhYd0ttzWMg/s3W4PO1Azj
 t4MZyVYitgLSkjVd+duOMPlyN6jpCvwtsZM9PNw9SOioG/Rg4ONOsw99Htj2w3LziRQSz7WtPi
 t1FEjmwe7hKOd3yCju3c4lh3
IronPort-SDR: fHsyatfGYepCRUdBScKIoHYbCjjPL+0HJ/+9kBJ2Mhqy2IADHy6LuS6Ddbng/+fC+ulMfzuaqz
 XRnTVANAT8EeuKXvP4+rwZUgHgg5meIDaJD4/Hnbyh1zceJPEzzgbBD+sOmA+rDnRKpLbByYj/
 N4LYuWP5DHZmZFhyGOLZtve9m3CGg2Jnic5KI8DNWiXeqZSzigWre0nfD89ynD22IXSfkELefI
 tpu0Qnj8ZSfvPTimwkyyduD+WL5F3cmEt7iJU3DmmKTJdy0SYZ60Q6kD4FdqaOrETfEbOL5ERn
 Ukk=
WDCIronportException: Internal
From:   Avri Altman <avri.altman@wdc.com>
To:     "James E . J . Bottomley" <jejb@linux.vnet.ibm.com>,
        "Martin K . Petersen" <martin.petersen@oracle.com>,
        linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     gregkh@linuxfoundation.org, Bart Van Assche <bvanassche@acm.org>,
        yongmyung lee <ymhungry.lee@samsung.com>,
        Daejun Park <daejun7.park@samsung.com>,
        alim.akhtar@samsung.com, asutoshd@codeaurora.org,
        Zang Leigang <zangleigang@hisilicon.com>,
        Avi Shchislowski <avi.shchislowski@wdc.com>,
        Bean Huo <beanhuo@micron.com>, cang@codeaurora.org,
        stanley.chu@mediatek.com, Avri Altman <avri.altman@wdc.com>
Subject: [PATCH v7 00/11] Add Host control mode to HPB
Date:   Wed, 31 Mar 2021 10:39:41 +0300
Message-Id: <20210331073952.102162-1-avri.altman@wdc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

v6 -> v7:
 - attend CanG's comments
 - add one more patch to transform set_dirty to iterate_rgn
 - rebase on Daejun's v32

v5 -> v6:
 - attend CanG's comments
 - rebase on Daejun's v29

v4 -> v5:
 - attend Daejun's comments
 - Control the number of inflight map requests

v3 -> v4:
 - rebase on Daejun's v25

v2 -> v3:
 - Attend Greg's and Can's comments
 - rebase on Daejun's v21

v1 -> v2:
 - attend Greg's and Daejun's comments
 - add patch 9 making host mode parameters configurable
 - rebase on Daejun's v19


The HPB spec defines 2 control modes - device control mode and host
control mode. In oppose to device control mode, in which the host obey
to whatever recommendation received from the device - In host control
mode, the host uses its own algorithms to decide which regions should
be activated or inactivated.

We kept the host managed heuristic simple and concise.

Aside from adding a by-spec functionality, host control mode entails
some further potential benefits: makes the hpb logic transparent and
readable, while allow tuning / scaling its various parameters, and
utilize system-wide info to optimize HPB potential.

This series is based on Samsung's V32 device-control HPB2.0 driver

This version was tested on Galaxy S20, and Xiaomi Mi10 pro.
Your meticulous review and testing is mostly welcome and appreciated.

Thanks,
Avri


Avri Altman (11):
  scsi: ufshpb: Cache HPB Control mode on init
  scsi: ufshpb: Add host control mode support to rsp_upiu
  scsi: ufshpb: Transform set_dirty to iterate_rgn
  scsi: ufshpb: Add reads counter
  scsi: ufshpb: Make eviction depends on region's reads
  scsi: ufshpb: Region inactivation in host mode
  scsi: ufshpb: Add hpb dev reset response
  scsi: ufshpb: Add "Cold" regions timer
  scsi: ufshpb: Limit the number of inflight map requests
  scsi: ufshpb: Add support for host control mode
  scsi: ufshpb: Make host mode parameters configurable

 Documentation/ABI/testing/sysfs-driver-ufs |  84 ++-
 drivers/scsi/ufs/ufshcd.h                  |   2 +
 drivers/scsi/ufs/ufshpb.c                  | 568 ++++++++++++++++++++-
 drivers/scsi/ufs/ufshpb.h                  |  44 ++
 4 files changed, 663 insertions(+), 35 deletions(-)

-- 
2.25.1