Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Wed, 31 Mar 2021 17:10:21 +0530
From:   Pratyush Yadav <p.yadav@ti.com>
To:     Vinod Koul <vkoul@kernel.org>
CC:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Peter Ujfalusi <peter.ujfalusi@gmail.com>,
        Maxime Ripard <mripard@kernel.org>,
        Benoit Parrot <bparrot@ti.com>,
        Hans Verkuil <hverkuil-cisco@xs4all.nl>,
        Alexandre Courbot <acourbot@chromium.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Stanimir Varbanov <stanimir.varbanov@linaro.org>,
        Helen Koike <helen.koike@collabora.com>,
        Michael Tretter <m.tretter@pengutronix.de>,
        Peter Chen <peter.chen@nxp.com>,
        Chunfeng Yun <chunfeng.yun@mediatek.com>,
        <linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-phy@lists.infradead.org>,
        <dmaengine@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>,
        Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: Re: [PATCH 00/16] CSI2RX support on J721E
Message-ID: <20210331114019.g4dnuhs2hno5fjdn@ti.com>
References: <20210330173348.30135-1-p.yadav@ti.com>
 <YGRB/42Q6aVBLoAq@vkoul-mobl.Dlink>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <YGRB/42Q6aVBLoAq@vkoul-mobl.Dlink>
User-Agent: NeoMutt/20171215
Precedence: bulk

On 31/03/21 03:03PM, Vinod Koul wrote:
> On 30-03-21, 23:03, Pratyush Yadav wrote:
> > Hi,
> > 
> > This series adds support for CSI2 capture on J721E. It includes some
> > fixes to the Cadence CSI2RX driver, adds Rx support to Cadence DPHY
> > driver, and finally adds the TI CSI2RX wrapper driver.
> > 
> > Tested on TI's J721E with OV5640 sensor.
> > 
> > Paul Kocialkowski (1):
> >   phy: Distinguish between Rx and Tx for MIPI D-PHY with submodes
> > 
> > Pratyush Yadav (15):
> >   phy: cdns-dphy: Prepare for Rx support
> >   phy: cdns-dphy: Allow setting mode
> >   phy: cdns-dphy: Add Rx support
> >   media: cadence: csi2rx: Add external DPHY support
> >   media: cadence: csi2rx: Soft reset the streams before starting capture
> >   media: cadence: csi2rx: Set the STOP bit when stopping a stream
> >   media: cadence: csi2rx: Fix stream data configuration
> >   media: cadence: csi2rx: Turn subdev power on before starting stream
> >   media: cadence: csi2rx: Add wrappers for subdev calls
> >   dmaengine: ti: k3-psil-j721e: Add entry for CSI2RX
> >   dt-bindings: media: Add DT bindings for TI CSI2RX driver
> >   media: ti-vpe: csi2rx: Add CSI2RX support
> >   dt-bindings: phy: Convert Cadence DPHY binding to YAML
> >   dt-bindings: phy: cdns,dphy: make clocks optional
> >   dt-bindings: phy: cdns,dphy: add power-domains property
> 
> Is there any dependency between patches to various subsystems, if not
> please do consider sending a series per subsystem...

Without patch 1, patch 5 and later won't build. Without patch 11, patch 
13 will not work.

> 
> Thanks
> 
> 
> > 
> >  .../devicetree/bindings/media/ti,csi2rx.yaml  |  70 ++
> >  .../devicetree/bindings/phy/cdns,dphy.txt     |  20 -
> >  .../devicetree/bindings/phy/cdns,dphy.yaml    |  52 +
> >  MAINTAINERS                                   |   7 +
> >  drivers/dma/ti/k3-psil-j721e.c                |  10 +
> >  drivers/media/platform/Kconfig                |  11 +
> >  drivers/media/platform/cadence/cdns-csi2rx.c  | 269 ++++-
> >  drivers/media/platform/ti-vpe/Makefile        |   1 +
> >  drivers/media/platform/ti-vpe/ti-csi2rx.c     | 964 ++++++++++++++++++
> >  drivers/phy/cadence/cdns-dphy.c               | 407 +++++++-
> >  include/linux/phy/phy-mipi-dphy.h             |  13 +
> >  11 files changed, 1754 insertions(+), 70 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/media/ti,csi2rx.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.txt
> >  create mode 100644 Documentation/devicetree/bindings/phy/cdns,dphy.yaml
> >  create mode 100644 drivers/media/platform/ti-vpe/ti-csi2rx.c
> > 
> > --
> > 2.30.0
> 
> -- 
> ~Vinod

-- 
Regards,
Pratyush Yadav
Texas Instruments Inc.