Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965071AbWJJS0P (ORCPT ); Tue, 10 Oct 2006 14:26:15 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965060AbWJJS0P (ORCPT ); Tue, 10 Oct 2006 14:26:15 -0400 Received: from omx1-ext.sgi.com ([192.48.179.11]:37552 "EHLO omx1.americas.sgi.com") by vger.kernel.org with ESMTP id S965058AbWJJS0K (ORCPT ); Tue, 10 Oct 2006 14:26:10 -0400 Date: Tue, 10 Oct 2006 13:26:04 -0500 (CDT) From: Brent Casavant Reply-To: Brent Casavant To: Randy Dunlap cc: linux-kernel@vger.kernel.org, Andrew Morton , Jeremy Higdon , Pat Gefre Subject: Re: [PATCH 2/2] ioc4: Enable build on non-SN2 In-Reply-To: <20061010103915.f412d770.rdunlap@xenotime.net> Message-ID: <20061010132357.Y71367@pkunk.americas.sgi.com> References: <20061010120928.V71367@pkunk.americas.sgi.com> <20061010103915.f412d770.rdunlap@xenotime.net> Organization: Silicon Graphics, Inc. MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 34670 Lines: 1110 The SGI PCI-RT card, based on the SGI IOC4 chip, will be made available on Altix XE (x86_64) platforms in the near future. As such it is now a misnomer for the IOC4 base device driver to live under drivers/sn, and would complicate builds for non-SN2. This patch moves the IOC4 base driver code from drivers/sn to drivers/misc, and updates the associated Makefiles and Kconfig files to allow building on non-SN2 configs. Due to the resulting change in link order, it is now necessary to use late_initcall() for IOC4 subdriver initialization. Acked-by: Pat Gefre Acked-by: Jeremy Higdon Signed-off-by: Brent Casavant --- Fixed indention of new help text in drivers/misc/Kconfig. drivers/sn/ioc4.c | 474 --------------------------------------- drivers/Kconfig | 6 drivers/ide/pci/sgiioc4.c | 2 drivers/misc/Kconfig | 12 drivers/misc/Makefile | 1 drivers/misc/ioc4.c | 474 +++++++++++++++++++++++++++++++++++++++ drivers/serial/ioc4_serial.c | 2 drivers/sn/Kconfig | 12 drivers/sn/Makefile | 1 9 files changed, 493 insertions(+), 491 deletions(-) --- Index: top/drivers/misc/ioc4.c =================================================================== --- /dev/null 1970-01-01 00:00:00.000000000 +0000 +++ top/drivers/misc/ioc4.c 2006-10-09 17:47:50.411607402 -0500 @@ -0,0 +1,474 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2005-2006 Silicon Graphics, Inc. All Rights Reserved. + */ + +/* This file contains the master driver module for use by SGI IOC4 subdrivers. + * + * It allocates any resources shared between multiple subdevices, and + * provides accessor functions (where needed) and the like for those + * resources. It also provides a mechanism for the subdevice modules + * to support loading and unloading. + * + * Non-shared resources (e.g. external interrupt A_INT_OUT register page + * alias, serial port and UART registers) are handled by the subdevice + * modules themselves. + * + * This is all necessary because IOC4 is not implemented as a multi-function + * PCI device, but an amalgamation of disparate registers for several + * types of device (ATA, serial, external interrupts). The normal + * resource management in the kernel doesn't have quite the right interfaces + * to handle this situation (e.g. multiple modules can't claim the same + * PCI ID), thus this IOC4 master module. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/*************** + * Definitions * + ***************/ + +/* Tweakable values */ + +/* PCI bus speed detection/calibration */ +#define IOC4_CALIBRATE_COUNT 63 /* Calibration cycle period */ +#define IOC4_CALIBRATE_CYCLES 256 /* Average over this many cycles */ +#define IOC4_CALIBRATE_DISCARD 2 /* Discard first few cycles */ +#define IOC4_CALIBRATE_LOW_MHZ 25 /* Lower bound on bus speed sanity */ +#define IOC4_CALIBRATE_HIGH_MHZ 75 /* Upper bound on bus speed sanity */ +#define IOC4_CALIBRATE_DEFAULT_MHZ 66 /* Assumed if sanity check fails */ + +/************************ + * Submodule management * + ************************/ + +static DEFINE_MUTEX(ioc4_mutex); + +static LIST_HEAD(ioc4_devices); +static LIST_HEAD(ioc4_submodules); + +/* Register an IOC4 submodule */ +int +ioc4_register_submodule(struct ioc4_submodule *is) +{ + struct ioc4_driver_data *idd; + + mutex_lock(&ioc4_mutex); + list_add(&is->is_list, &ioc4_submodules); + + /* Initialize submodule for each IOC4 */ + if (!is->is_probe) + goto out; + + list_for_each_entry(idd, &ioc4_devices, idd_list) { + if (is->is_probe(idd)) { + printk(KERN_WARNING + "%s: IOC4 submodule %s probe failed " + "for pci_dev %s", + __FUNCTION__, module_name(is->is_owner), + pci_name(idd->idd_pdev)); + } + } + out: + mutex_unlock(&ioc4_mutex); + return 0; +} + +/* Unregister an IOC4 submodule */ +void +ioc4_unregister_submodule(struct ioc4_submodule *is) +{ + struct ioc4_driver_data *idd; + + mutex_lock(&ioc4_mutex); + list_del(&is->is_list); + + /* Remove submodule for each IOC4 */ + if (!is->is_remove) + goto out; + + list_for_each_entry(idd, &ioc4_devices, idd_list) { + if (is->is_remove(idd)) { + printk(KERN_WARNING + "%s: IOC4 submodule %s remove failed " + "for pci_dev %s.\n", + __FUNCTION__, module_name(is->is_owner), + pci_name(idd->idd_pdev)); + } + } + out: + mutex_unlock(&ioc4_mutex); +} + +/********************* + * Device management * + *********************/ + +#define IOC4_CALIBRATE_LOW_LIMIT \ + (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ) +#define IOC4_CALIBRATE_HIGH_LIMIT \ + (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ) +#define IOC4_CALIBRATE_DEFAULT \ + (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ) + +#define IOC4_CALIBRATE_END \ + (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD) + +#define IOC4_INT_OUT_MODE_TOGGLE 0x7 /* Toggle INT_OUT every COUNT+1 ticks */ + +/* Determines external interrupt output clock period of the PCI bus an + * IOC4 is attached to. This value can be used to determine the PCI + * bus speed. + * + * IOC4 has a design feature that various internal timers are derived from + * the PCI bus clock. This causes IOC4 device drivers to need to take the + * bus speed into account when setting various register values (e.g. INT_OUT + * register COUNT field, UART divisors, etc). Since this information is + * needed by several subdrivers, it is determined by the main IOC4 driver, + * even though the following code utilizes external interrupt registers + * to perform the speed calculation. + */ +static void +ioc4_clock_calibrate(struct ioc4_driver_data *idd) +{ + union ioc4_int_out int_out; + union ioc4_gpcr gpcr; + unsigned int state, last_state = 1; + struct timespec start_ts, end_ts; + uint64_t start, end, period; + unsigned int count = 0; + + /* Enable output */ + gpcr.raw = 0; + gpcr.fields.dir = IOC4_GPCR_DIR_0; + gpcr.fields.int_out_en = 1; + writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw); + + /* Reset to power-on state */ + writel(0, &idd->idd_misc_regs->int_out.raw); + mmiowb(); + + /* Set up square wave */ + int_out.raw = 0; + int_out.fields.count = IOC4_CALIBRATE_COUNT; + int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE; + int_out.fields.diag = 0; + writel(int_out.raw, &idd->idd_misc_regs->int_out.raw); + mmiowb(); + + /* Check square wave period averaged over some number of cycles */ + do { + int_out.raw = readl(&idd->idd_misc_regs->int_out.raw); + state = int_out.fields.int_out; + if (!last_state && state) { + count++; + if (count == IOC4_CALIBRATE_END) { + ktime_get_ts(&end_ts); + break; + } else if (count == IOC4_CALIBRATE_DISCARD) + ktime_get_ts(&start_ts); + } + last_state = state; + } while (1); + + /* Calculation rearranged to preserve intermediate precision. + * Logically: + * 1. "end - start" gives us the measurement period over all + * the square wave cycles. + * 2. Divide by number of square wave cycles to get the period + * of a square wave cycle. + * 3. Divide by 2*(int_out.fields.count+1), which is the formula + * by which the IOC4 generates the square wave, to get the + * period of an IOC4 INT_OUT count. + */ + end = end_ts.tv_sec * NSEC_PER_SEC + end_ts.tv_nsec; + start = start_ts.tv_sec * NSEC_PER_SEC + start_ts.tv_nsec; + period = (end - start) / + (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1)); + + /* Bounds check the result. */ + if (period > IOC4_CALIBRATE_LOW_LIMIT || + period < IOC4_CALIBRATE_HIGH_LIMIT) { + printk(KERN_INFO + "IOC4 %s: Clock calibration failed. Assuming" + "PCI clock is %d ns.\n", + pci_name(idd->idd_pdev), + IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); + period = IOC4_CALIBRATE_DEFAULT; + } else { + printk(KERN_DEBUG + "IOC4 %s: PCI clock is %ld ns.\n", + pci_name(idd->idd_pdev), + period / IOC4_EXTINT_COUNT_DIVISOR); + } + + /* Remember results. We store the extint clock period rather + * than the PCI clock period so that greater precision is + * retained. Divide by IOC4_EXTINT_COUNT_DIVISOR to get + * PCI clock period. + */ + idd->count_period = period; +} + +/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT. + * Each brings out different combinations of IOC4 signals, thus. + * the IOC4 subdrivers need to know to which we're attached. + * + * We look for the presence of a SCSI (IO9) or SATA (IO10) controller + * on the same PCI bus at slot number 3 to differentiate IO9 from IO10. + * If neither is present, it's a PCI-RT. + */ +static unsigned int +ioc4_variant(struct ioc4_driver_data *idd) +{ + struct pci_dev *pdev = NULL; + int found = 0; + + /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */ + do { + pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC, + PCI_DEVICE_ID_QLOGIC_ISP12160, pdev); + if (pdev && + idd->idd_pdev->bus->number == pdev->bus->number && + 3 == PCI_SLOT(pdev->devfn)) + found = 1; + pci_dev_put(pdev); + } while (pdev && !found); + if (NULL != pdev) + return IOC4_VARIANT_IO9; + + /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */ + pdev = NULL; + do { + pdev = pci_get_device(PCI_VENDOR_ID_VITESSE, + PCI_DEVICE_ID_VITESSE_VSC7174, pdev); + if (pdev && + idd->idd_pdev->bus->number == pdev->bus->number && + 3 == PCI_SLOT(pdev->devfn)) + found = 1; + pci_dev_put(pdev); + } while (pdev && !found); + if (NULL != pdev) + return IOC4_VARIANT_IO10; + + /* PCI-RT: No SCSI/SATA controller will be present */ + return IOC4_VARIANT_PCI_RT; +} + +/* Adds a new instance of an IOC4 card */ +static int +ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) +{ + struct ioc4_driver_data *idd; + struct ioc4_submodule *is; + uint32_t pcmd; + int ret; + + /* Enable IOC4 and take ownership of it */ + if ((ret = pci_enable_device(pdev))) { + printk(KERN_WARNING + "%s: Failed to enable IOC4 device for pci_dev %s.\n", + __FUNCTION__, pci_name(pdev)); + goto out; + } + pci_set_master(pdev); + + /* Set up per-IOC4 data */ + idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL); + if (!idd) { + printk(KERN_WARNING + "%s: Failed to allocate IOC4 data for pci_dev %s.\n", + __FUNCTION__, pci_name(pdev)); + ret = -ENODEV; + goto out_idd; + } + idd->idd_pdev = pdev; + idd->idd_pci_id = pci_id; + + /* Map IOC4 misc registers. These are shared between subdevices + * so the main IOC4 module manages them. + */ + idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0); + if (!idd->idd_bar0) { + printk(KERN_WARNING + "%s: Unable to find IOC4 misc resource " + "for pci_dev %s.\n", + __FUNCTION__, pci_name(idd->idd_pdev)); + ret = -ENODEV; + goto out_pci; + } + if (!request_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs), + "ioc4_misc")) { + printk(KERN_WARNING + "%s: Unable to request IOC4 misc region " + "for pci_dev %s.\n", + __FUNCTION__, pci_name(idd->idd_pdev)); + ret = -ENODEV; + goto out_pci; + } + idd->idd_misc_regs = ioremap(idd->idd_bar0, + sizeof(struct ioc4_misc_regs)); + if (!idd->idd_misc_regs) { + printk(KERN_WARNING + "%s: Unable to remap IOC4 misc region " + "for pci_dev %s.\n", + __FUNCTION__, pci_name(idd->idd_pdev)); + ret = -ENODEV; + goto out_misc_region; + } + + /* Failsafe portion of per-IOC4 initialization */ + + /* Detect card variant */ + idd->idd_variant = ioc4_variant(idd); + printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev), + idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" : + idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" : + idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown"); + + /* Initialize IOC4 */ + pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd); + pci_write_config_dword(idd->idd_pdev, PCI_COMMAND, + pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); + + /* Determine PCI clock */ + ioc4_clock_calibrate(idd); + + /* Disable/clear all interrupts. Need to do this here lest + * one submodule request the shared IOC4 IRQ, but interrupt + * is generated by a different subdevice. + */ + /* Disable */ + writel(~0, &idd->idd_misc_regs->other_iec.raw); + writel(~0, &idd->idd_misc_regs->sio_iec); + /* Clear (i.e. acknowledge) */ + writel(~0, &idd->idd_misc_regs->other_ir.raw); + writel(~0, &idd->idd_misc_regs->sio_ir); + + /* Track PCI-device specific data */ + idd->idd_serial_data = NULL; + pci_set_drvdata(idd->idd_pdev, idd); + + mutex_lock(&ioc4_mutex); + list_add_tail(&idd->idd_list, &ioc4_devices); + + /* Add this IOC4 to all submodules */ + list_for_each_entry(is, &ioc4_submodules, is_list) { + if (is->is_probe && is->is_probe(idd)) { + printk(KERN_WARNING + "%s: IOC4 submodule 0x%s probe failed " + "for pci_dev %s.\n", + __FUNCTION__, module_name(is->is_owner), + pci_name(idd->idd_pdev)); + } + } + mutex_unlock(&ioc4_mutex); + + return 0; + +out_misc_region: + release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); +out_pci: + kfree(idd); +out_idd: + pci_disable_device(pdev); +out: + return ret; +} + +/* Removes a particular instance of an IOC4 card. */ +static void +ioc4_remove(struct pci_dev *pdev) +{ + struct ioc4_submodule *is; + struct ioc4_driver_data *idd; + + idd = pci_get_drvdata(pdev); + + /* Remove this IOC4 from all submodules */ + mutex_lock(&ioc4_mutex); + list_for_each_entry(is, &ioc4_submodules, is_list) { + if (is->is_remove && is->is_remove(idd)) { + printk(KERN_WARNING + "%s: IOC4 submodule 0x%s remove failed " + "for pci_dev %s.\n", + __FUNCTION__, module_name(is->is_owner), + pci_name(idd->idd_pdev)); + } + } + mutex_unlock(&ioc4_mutex); + + /* Release resources */ + iounmap(idd->idd_misc_regs); + if (!idd->idd_bar0) { + printk(KERN_WARNING + "%s: Unable to get IOC4 misc mapping for pci_dev %s. " + "Device removal may be incomplete.\n", + __FUNCTION__, pci_name(idd->idd_pdev)); + } + release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); + + /* Disable IOC4 and relinquish */ + pci_disable_device(pdev); + + /* Remove and free driver data */ + mutex_lock(&ioc4_mutex); + list_del(&idd->idd_list); + mutex_unlock(&ioc4_mutex); + kfree(idd); +} + +static struct pci_device_id ioc4_id_table[] = { + {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID, + PCI_ANY_ID, 0x0b4000, 0xFFFFFF}, + {0} +}; + +static struct pci_driver ioc4_driver = { + .name = "IOC4", + .id_table = ioc4_id_table, + .probe = ioc4_probe, + .remove = ioc4_remove, +}; + +MODULE_DEVICE_TABLE(pci, ioc4_id_table); + +/********************* + * Module management * + *********************/ + +/* Module load */ +static int __devinit +ioc4_init(void) +{ + return pci_register_driver(&ioc4_driver); +} + +/* Module unload */ +static void __devexit +ioc4_exit(void) +{ + pci_unregister_driver(&ioc4_driver); +} + +module_init(ioc4_init); +module_exit(ioc4_exit); + +MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. "); +MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(ioc4_register_submodule); +EXPORT_SYMBOL(ioc4_unregister_submodule); Index: top/drivers/sn/ioc4.c =================================================================== --- top.orig/drivers/sn/ioc4.c 2006-10-09 17:41:25.000000000 -0500 +++ /dev/null 1970-01-01 00:00:00.000000000 +0000 @@ -1,474 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005-2006 Silicon Graphics, Inc. All Rights Reserved. - */ - -/* This file contains the master driver module for use by SGI IOC4 subdrivers. - * - * It allocates any resources shared between multiple subdevices, and - * provides accessor functions (where needed) and the like for those - * resources. It also provides a mechanism for the subdevice modules - * to support loading and unloading. - * - * Non-shared resources (e.g. external interrupt A_INT_OUT register page - * alias, serial port and UART registers) are handled by the subdevice - * modules themselves. - * - * This is all necessary because IOC4 is not implemented as a multi-function - * PCI device, but an amalgamation of disparate registers for several - * types of device (ATA, serial, external interrupts). The normal - * resource management in the kernel doesn't have quite the right interfaces - * to handle this situation (e.g. multiple modules can't claim the same - * PCI ID), thus this IOC4 master module. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/*************** - * Definitions * - ***************/ - -/* Tweakable values */ - -/* PCI bus speed detection/calibration */ -#define IOC4_CALIBRATE_COUNT 63 /* Calibration cycle period */ -#define IOC4_CALIBRATE_CYCLES 256 /* Average over this many cycles */ -#define IOC4_CALIBRATE_DISCARD 2 /* Discard first few cycles */ -#define IOC4_CALIBRATE_LOW_MHZ 25 /* Lower bound on bus speed sanity */ -#define IOC4_CALIBRATE_HIGH_MHZ 75 /* Upper bound on bus speed sanity */ -#define IOC4_CALIBRATE_DEFAULT_MHZ 66 /* Assumed if sanity check fails */ - -/************************ - * Submodule management * - ************************/ - -static DEFINE_MUTEX(ioc4_mutex); - -static LIST_HEAD(ioc4_devices); -static LIST_HEAD(ioc4_submodules); - -/* Register an IOC4 submodule */ -int -ioc4_register_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_add(&is->is_list, &ioc4_submodules); - - /* Initialize submodule for each IOC4 */ - if (!is->is_probe) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s probe failed " - "for pci_dev %s", - __FUNCTION__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); - return 0; -} - -/* Unregister an IOC4 submodule */ -void -ioc4_unregister_submodule(struct ioc4_submodule *is) -{ - struct ioc4_driver_data *idd; - - mutex_lock(&ioc4_mutex); - list_del(&is->is_list); - - /* Remove submodule for each IOC4 */ - if (!is->is_remove) - goto out; - - list_for_each_entry(idd, &ioc4_devices, idd_list) { - if (is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule %s remove failed " - "for pci_dev %s.\n", - __FUNCTION__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - out: - mutex_unlock(&ioc4_mutex); -} - -/********************* - * Device management * - *********************/ - -#define IOC4_CALIBRATE_LOW_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_LOW_MHZ) -#define IOC4_CALIBRATE_HIGH_LIMIT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_HIGH_MHZ) -#define IOC4_CALIBRATE_DEFAULT \ - (1000*IOC4_EXTINT_COUNT_DIVISOR/IOC4_CALIBRATE_DEFAULT_MHZ) - -#define IOC4_CALIBRATE_END \ - (IOC4_CALIBRATE_CYCLES + IOC4_CALIBRATE_DISCARD) - -#define IOC4_INT_OUT_MODE_TOGGLE 0x7 /* Toggle INT_OUT every COUNT+1 ticks */ - -/* Determines external interrupt output clock period of the PCI bus an - * IOC4 is attached to. This value can be used to determine the PCI - * bus speed. - * - * IOC4 has a design feature that various internal timers are derived from - * the PCI bus clock. This causes IOC4 device drivers to need to take the - * bus speed into account when setting various register values (e.g. INT_OUT - * register COUNT field, UART divisors, etc). Since this information is - * needed by several subdrivers, it is determined by the main IOC4 driver, - * even though the following code utilizes external interrupt registers - * to perform the speed calculation. - */ -static void -ioc4_clock_calibrate(struct ioc4_driver_data *idd) -{ - union ioc4_int_out int_out; - union ioc4_gpcr gpcr; - unsigned int state, last_state = 1; - struct timespec start_ts, end_ts; - uint64_t start, end, period; - unsigned int count = 0; - - /* Enable output */ - gpcr.raw = 0; - gpcr.fields.dir = IOC4_GPCR_DIR_0; - gpcr.fields.int_out_en = 1; - writel(gpcr.raw, &idd->idd_misc_regs->gpcr_s.raw); - - /* Reset to power-on state */ - writel(0, &idd->idd_misc_regs->int_out.raw); - mmiowb(); - - /* Set up square wave */ - int_out.raw = 0; - int_out.fields.count = IOC4_CALIBRATE_COUNT; - int_out.fields.mode = IOC4_INT_OUT_MODE_TOGGLE; - int_out.fields.diag = 0; - writel(int_out.raw, &idd->idd_misc_regs->int_out.raw); - mmiowb(); - - /* Check square wave period averaged over some number of cycles */ - do { - int_out.raw = readl(&idd->idd_misc_regs->int_out.raw); - state = int_out.fields.int_out; - if (!last_state && state) { - count++; - if (count == IOC4_CALIBRATE_END) { - ktime_get_ts(&end_ts); - break; - } else if (count == IOC4_CALIBRATE_DISCARD) - ktime_get_ts(&start_ts); - } - last_state = state; - } while (1); - - /* Calculation rearranged to preserve intermediate precision. - * Logically: - * 1. "end - start" gives us the measurement period over all - * the square wave cycles. - * 2. Divide by number of square wave cycles to get the period - * of a square wave cycle. - * 3. Divide by 2*(int_out.fields.count+1), which is the formula - * by which the IOC4 generates the square wave, to get the - * period of an IOC4 INT_OUT count. - */ - end = end_ts.tv_sec * NSEC_PER_SEC + end_ts.tv_nsec; - start = start_ts.tv_sec * NSEC_PER_SEC + start_ts.tv_nsec; - period = (end - start) / - (IOC4_CALIBRATE_CYCLES * 2 * (IOC4_CALIBRATE_COUNT + 1)); - - /* Bounds check the result. */ - if (period > IOC4_CALIBRATE_LOW_LIMIT || - period < IOC4_CALIBRATE_HIGH_LIMIT) { - printk(KERN_INFO - "IOC4 %s: Clock calibration failed. Assuming" - "PCI clock is %d ns.\n", - pci_name(idd->idd_pdev), - IOC4_CALIBRATE_DEFAULT / IOC4_EXTINT_COUNT_DIVISOR); - period = IOC4_CALIBRATE_DEFAULT; - } else { - printk(KERN_DEBUG - "IOC4 %s: PCI clock is %ld ns.\n", - pci_name(idd->idd_pdev), - period / IOC4_EXTINT_COUNT_DIVISOR); - } - - /* Remember results. We store the extint clock period rather - * than the PCI clock period so that greater precision is - * retained. Divide by IOC4_EXTINT_COUNT_DIVISOR to get - * PCI clock period. - */ - idd->count_period = period; -} - -/* There are three variants of IOC4 cards: IO9, IO10, and PCI-RT. - * Each brings out different combinations of IOC4 signals, thus. - * the IOC4 subdrivers need to know to which we're attached. - * - * We look for the presence of a SCSI (IO9) or SATA (IO10) controller - * on the same PCI bus at slot number 3 to differentiate IO9 from IO10. - * If neither is present, it's a PCI-RT. - */ -static unsigned int -ioc4_variant(struct ioc4_driver_data *idd) -{ - struct pci_dev *pdev = NULL; - int found = 0; - - /* IO9: Look for a QLogic ISP 12160 at the same bus and slot 3. */ - do { - pdev = pci_get_device(PCI_VENDOR_ID_QLOGIC, - PCI_DEVICE_ID_QLOGIC_ISP12160, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - pci_dev_put(pdev); - } while (pdev && !found); - if (NULL != pdev) - return IOC4_VARIANT_IO9; - - /* IO10: Look for a Vitesse VSC 7174 at the same bus and slot 3. */ - pdev = NULL; - do { - pdev = pci_get_device(PCI_VENDOR_ID_VITESSE, - PCI_DEVICE_ID_VITESSE_VSC7174, pdev); - if (pdev && - idd->idd_pdev->bus->number == pdev->bus->number && - 3 == PCI_SLOT(pdev->devfn)) - found = 1; - pci_dev_put(pdev); - } while (pdev && !found); - if (NULL != pdev) - return IOC4_VARIANT_IO10; - - /* PCI-RT: No SCSI/SATA controller will be present */ - return IOC4_VARIANT_PCI_RT; -} - -/* Adds a new instance of an IOC4 card */ -static int -ioc4_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id) -{ - struct ioc4_driver_data *idd; - struct ioc4_submodule *is; - uint32_t pcmd; - int ret; - - /* Enable IOC4 and take ownership of it */ - if ((ret = pci_enable_device(pdev))) { - printk(KERN_WARNING - "%s: Failed to enable IOC4 device for pci_dev %s.\n", - __FUNCTION__, pci_name(pdev)); - goto out; - } - pci_set_master(pdev); - - /* Set up per-IOC4 data */ - idd = kmalloc(sizeof(struct ioc4_driver_data), GFP_KERNEL); - if (!idd) { - printk(KERN_WARNING - "%s: Failed to allocate IOC4 data for pci_dev %s.\n", - __FUNCTION__, pci_name(pdev)); - ret = -ENODEV; - goto out_idd; - } - idd->idd_pdev = pdev; - idd->idd_pci_id = pci_id; - - /* Map IOC4 misc registers. These are shared between subdevices - * so the main IOC4 module manages them. - */ - idd->idd_bar0 = pci_resource_start(idd->idd_pdev, 0); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to find IOC4 misc resource " - "for pci_dev %s.\n", - __FUNCTION__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - if (!request_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs), - "ioc4_misc")) { - printk(KERN_WARNING - "%s: Unable to request IOC4 misc region " - "for pci_dev %s.\n", - __FUNCTION__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_pci; - } - idd->idd_misc_regs = ioremap(idd->idd_bar0, - sizeof(struct ioc4_misc_regs)); - if (!idd->idd_misc_regs) { - printk(KERN_WARNING - "%s: Unable to remap IOC4 misc region " - "for pci_dev %s.\n", - __FUNCTION__, pci_name(idd->idd_pdev)); - ret = -ENODEV; - goto out_misc_region; - } - - /* Failsafe portion of per-IOC4 initialization */ - - /* Detect card variant */ - idd->idd_variant = ioc4_variant(idd); - printk(KERN_INFO "IOC4 %s: %s card detected.\n", pci_name(pdev), - idd->idd_variant == IOC4_VARIANT_IO9 ? "IO9" : - idd->idd_variant == IOC4_VARIANT_PCI_RT ? "PCI-RT" : - idd->idd_variant == IOC4_VARIANT_IO10 ? "IO10" : "unknown"); - - /* Initialize IOC4 */ - pci_read_config_dword(idd->idd_pdev, PCI_COMMAND, &pcmd); - pci_write_config_dword(idd->idd_pdev, PCI_COMMAND, - pcmd | PCI_COMMAND_PARITY | PCI_COMMAND_SERR); - - /* Determine PCI clock */ - ioc4_clock_calibrate(idd); - - /* Disable/clear all interrupts. Need to do this here lest - * one submodule request the shared IOC4 IRQ, but interrupt - * is generated by a different subdevice. - */ - /* Disable */ - writel(~0, &idd->idd_misc_regs->other_iec.raw); - writel(~0, &idd->idd_misc_regs->sio_iec); - /* Clear (i.e. acknowledge) */ - writel(~0, &idd->idd_misc_regs->other_ir.raw); - writel(~0, &idd->idd_misc_regs->sio_ir); - - /* Track PCI-device specific data */ - idd->idd_serial_data = NULL; - pci_set_drvdata(idd->idd_pdev, idd); - - mutex_lock(&ioc4_mutex); - list_add_tail(&idd->idd_list, &ioc4_devices); - - /* Add this IOC4 to all submodules */ - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_probe && is->is_probe(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s probe failed " - "for pci_dev %s.\n", - __FUNCTION__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - return 0; - -out_misc_region: - release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); -out_pci: - kfree(idd); -out_idd: - pci_disable_device(pdev); -out: - return ret; -} - -/* Removes a particular instance of an IOC4 card. */ -static void -ioc4_remove(struct pci_dev *pdev) -{ - struct ioc4_submodule *is; - struct ioc4_driver_data *idd; - - idd = pci_get_drvdata(pdev); - - /* Remove this IOC4 from all submodules */ - mutex_lock(&ioc4_mutex); - list_for_each_entry(is, &ioc4_submodules, is_list) { - if (is->is_remove && is->is_remove(idd)) { - printk(KERN_WARNING - "%s: IOC4 submodule 0x%s remove failed " - "for pci_dev %s.\n", - __FUNCTION__, module_name(is->is_owner), - pci_name(idd->idd_pdev)); - } - } - mutex_unlock(&ioc4_mutex); - - /* Release resources */ - iounmap(idd->idd_misc_regs); - if (!idd->idd_bar0) { - printk(KERN_WARNING - "%s: Unable to get IOC4 misc mapping for pci_dev %s. " - "Device removal may be incomplete.\n", - __FUNCTION__, pci_name(idd->idd_pdev)); - } - release_region(idd->idd_bar0, sizeof(struct ioc4_misc_regs)); - - /* Disable IOC4 and relinquish */ - pci_disable_device(pdev); - - /* Remove and free driver data */ - mutex_lock(&ioc4_mutex); - list_del(&idd->idd_list); - mutex_unlock(&ioc4_mutex); - kfree(idd); -} - -static struct pci_device_id ioc4_id_table[] = { - {PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC4, PCI_ANY_ID, - PCI_ANY_ID, 0x0b4000, 0xFFFFFF}, - {0} -}; - -static struct pci_driver ioc4_driver = { - .name = "IOC4", - .id_table = ioc4_id_table, - .probe = ioc4_probe, - .remove = ioc4_remove, -}; - -MODULE_DEVICE_TABLE(pci, ioc4_id_table); - -/********************* - * Module management * - *********************/ - -/* Module load */ -static int __devinit -ioc4_init(void) -{ - return pci_register_driver(&ioc4_driver); -} - -/* Module unload */ -static void __devexit -ioc4_exit(void) -{ - pci_unregister_driver(&ioc4_driver); -} - -module_init(ioc4_init); -module_exit(ioc4_exit); - -MODULE_AUTHOR("Brent Casavant - Silicon Graphics, Inc. "); -MODULE_DESCRIPTION("PCI driver master module for SGI IOC4 Base-IO Card"); -MODULE_LICENSE("GPL"); - -EXPORT_SYMBOL(ioc4_register_submodule); -EXPORT_SYMBOL(ioc4_unregister_submodule); Index: top/drivers/misc/Makefile =================================================================== --- top.orig/drivers/misc/Makefile 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/misc/Makefile 2006-10-09 17:47:50.415607888 -0500 @@ -8,3 +8,4 @@ obj-$(CONFIG_LKDTM) += lkdtm.o obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o +obj-$(CONFIG_SGI_IOC4) += ioc4.o Index: top/drivers/sn/Makefile =================================================================== --- top.orig/drivers/sn/Makefile 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/sn/Makefile 2006-10-09 17:47:50.415607888 -0500 @@ -3,5 +3,4 @@ # # -obj-$(CONFIG_SGI_IOC4) += ioc4.o obj-$(CONFIG_SGI_IOC3) += ioc3.o Index: top/drivers/Kconfig =================================================================== --- top.orig/drivers/Kconfig 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/Kconfig 2006-10-09 17:47:50.415607888 -0500 @@ -14,6 +14,10 @@ source "drivers/block/Kconfig" +# misc before ide - BLK_DEV_SGIIOC4 depends on SGI_IOC4 + +source "drivers/misc/Kconfig" + source "drivers/ide/Kconfig" source "drivers/scsi/Kconfig" @@ -52,8 +56,6 @@ source "drivers/hwmon/Kconfig" -source "drivers/misc/Kconfig" - source "drivers/mfd/Kconfig" source "drivers/media/Kconfig" Index: top/drivers/ide/pci/sgiioc4.c =================================================================== --- top.orig/drivers/ide/pci/sgiioc4.c 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/ide/pci/sgiioc4.c 2006-10-09 17:47:50.419608373 -0500 @@ -774,7 +774,7 @@ ioc4_unregister_submodule(&ioc4_ide_submodule); } -module_init(ioc4_ide_init); +late_initcall(ioc4_ide_init); /* Call only after IDE init is done */ module_exit(ioc4_ide_exit); MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon"); Index: top/drivers/serial/ioc4_serial.c =================================================================== --- top.orig/drivers/serial/ioc4_serial.c 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/serial/ioc4_serial.c 2006-10-09 17:47:50.419608373 -0500 @@ -2935,7 +2935,7 @@ uart_unregister_driver(&ioc4_uart_rs422); } -module_init(ioc4_serial_init); +late_initcall(ioc4_serial_init); /* Call only after tty init is done */ module_exit(ioc4_serial_exit); MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) "); Index: top/drivers/misc/Kconfig =================================================================== --- top.orig/drivers/misc/Kconfig 2006-10-09 17:41:25.000000000 -0500 +++ top/drivers/misc/Kconfig 2006-10-10 13:22:23.135307792 -0500 @@ -28,6 +28,18 @@ If unsure, say N. +config SGI_IOC4 + tristate "SGI IOC4 Base IO support" + default m + ---help--- + This option enables basic support for the IOC4 chip on certain + SGI IO controller cards (IO9, IO10, and PCI-RT). This option + does not enable any specific functions on such a card, but provides + necessary infrastructure for other drivers to utilize. + + If you have an SGI Altix with an IOC4-based card say Y. + Otherwise say N. + config TIFM_CORE tristate "TI Flash Media interface support (EXPERIMENTAL)" depends on EXPERIMENTAL Index: top/drivers/sn/Kconfig =================================================================== --- top.orig/drivers/sn/Kconfig 2006-10-09 17:46:07.000000000 -0500 +++ top/drivers/sn/Kconfig 2006-10-09 17:48:23.203585091 -0500 @@ -5,18 +5,6 @@ menu "SN Devices" depends on SGI_SN -config SGI_IOC4 - tristate "SGI IOC4 Base IO support" - default m - ---help--- - This option enables basic support for the IOC4 chip on certain - SGI IO controller cards (IO9, IO10, and PCI-RT). This option - does not enable any specific functions on such a card, but provides - necessary infrastructure for other drivers to utilize. - - If you have an SGI Altix with an IOC4-based card say Y. - Otherwise say N. - config SGI_IOC3 tristate "SGI IOC3 Base IO support" default m -- Brent Casavant All music is folk music. I ain't bcasavan@sgi.com never heard a horse sing a song. Silicon Graphics, Inc. -- Louis Armstrong - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/