Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: /VfosNVVmtyfg2jHLAEFA+T/PyUpLYFLuFnPvcgjUAxB/oZVA64xJuaG5/dWc7WWbuTcGgsgKC
 IhRvetYF9dKt+TOwCCqyxqWIbHj3IP9eDTbx3pj7F7JbqGC/jRtrRSNjSZPDq473M2Ko0vJfa4
 qwWbwhTLWC4DdPwMOe061QGLg5mu8CEZgTqpjsXBae2QzHiix09smrBdtYTo8zSTsBKaHpUtxa
 xJWNtJM1QweXsWT5j/hGZXhtV3Hnp7sb8UaobJ8qVZseLRrA8stLmg9iVMBWSA1Yy4ARksgMdZ
 AT4=
From:   Can Guo <cang@codeaurora.org>
To:     asutoshd@codeaurora.org, nguyenb@codeaurora.org,
        hongwus@codeaurora.org, linux-scsi@vger.kernel.org,
        kernel-team@android.com, cang@codeaurora.org
Cc:     "Martin K. Petersen" <martin.petersen@oracle.com>,
        Adrian Hunter <adrian.hunter@intel.com>,
        Suzuki K Poulose <suzuki.poulose@arm.com>,
        Tom Rix <trix@redhat.com>, Ilya Dryomov <idryomov@gmail.com>,
        Bean Huo <beanhuo@micron.com>,
        Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
        Lukas Bulwahn <lukas.bulwahn@gmail.com>,
        linux-kernel@vger.kernel.org (open list)
Subject: [PATCH 2/2] scsi: ufs: Add support for hba performance monitor
Date:   Wed, 31 Mar 2021 23:15:03 -0700
Message-Id: <1617257704-1154-3-git-send-email-cang@codeaurora.org>
In-Reply-To: <1617257704-1154-1-git-send-email-cang@codeaurora.org>
References: <1617257704-1154-1-git-send-email-cang@codeaurora.org>
Precedence: bulk

Add a new sysfs group which has nodes to monitor data/request transfer
performance. This sysfs group has nodes showing total sectors/requests
transferred, total busy time spent and max/min/avg/sum latencies.

Signed-off-by: Can Guo <cang@codeaurora.org>

diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs
index d1bc23c..8380866 100644
--- a/Documentation/ABI/testing/sysfs-driver-ufs
+++ b/Documentation/ABI/testing/sysfs-driver-ufs
@@ -995,6 +995,132 @@ Description:	This entry shows the target state of an UFS UIC link
 
 		The file is read only.
 
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_enable
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the status of performance monitor enablement
+		and it can be used to start/stop the monitor. When the monitor
+		is stopped, the performance data collected is also cleared.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/monitor_chunk_size
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file tells the monitor to focus on requests transferring
+		data of specific chunk size (in Bytes). 0 means any chunk size.
+		It can only be changed when monitor is disabled.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_sectors
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many sectors (in 512 Bytes) have been
+		sent from device to host after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_total_busy
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how long (in micro seconds) has been spent
+		sending data from device to host after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_nr_requests
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many read requests have been sent after
+		monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_max
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the maximum latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_min
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the minimum latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_avg
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the average latency (in micro seconds) of
+		read requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/read_req_latency_sum
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the total latency (in micro seconds) of
+		read requests sent after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_sectors
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many sectors (in 512 Bytes) have been sent
+		from host to device after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_total_busy
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how long (in micro seconds) has been spent
+		sending data from host to device after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_nr_requests
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows how many write requests have been sent after
+		monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_max
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the maximum latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_min
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the minimum latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_avg
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the average latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
+What:		/sys/bus/platform/drivers/ufshcd/*/monitor/write_req_latency_sum
+Date:		January 2021
+Contact:	Can Guo <cang@codeaurora.org>
+Description:	This file shows the total latency (in micro seconds) of write
+		requests after monitor gets started.
+
+		The file is read only.
+
 What:		/sys/bus/platform/drivers/ufshcd/*/device_descriptor/wb_presv_us_en
 Date:		June 2020
 Contact:	Asutosh Das <asutoshd@codeaurora.org>
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.