Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Zev Weiss <zev@bewilderbeest.net>
To:     Joel Stanley <joel@jms.id.au>
Cc:     openbmc@lists.ozlabs.org, linux-arm-kernel@lists.infradead.org,
        linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        Andrew Jeffery <andrew@aj.id.au>,
        Zev Weiss <zev@bewilderbeest.net>
Subject: [PATCH v3 0/4] aspeed-vuart: generalized DT properties
Date:   Thu,  1 Apr 2021 19:47:12 -0500
Message-Id: <20210402004716.15961-1-zev@bewilderbeest.net>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This series generalizes the aspeed-vuart driver's device tree
properties to cover all the attributes it currently exposes via sysfs.

The aspeed,sirq-polarity-sense property was a bit of a design mistake
in that it ties Aspeed VUART SIRQ polarity to SCU register bits that
aren't really inherently related to it; the first patch in this series
deprecates it (though we hope to eventually remove it).

The rest of the series adds two new properties, aspeed,lpc-address and
aspeed,sirq.  The latter allows describing the SIRQ polarity (along
with the interrupt number) directly, providing a simpler replacement
for aspeed,sirq-polarity-sense.


Changes since v2 [0]:
 - expanded to also handle sirq number and lpc address in addition to
   sirq polarity
 - added default settings if DT properties not specified
 - refactored existing sysfs code slightly, adding range checks
 - cleaned up 'make dt_binding_check' warnings

Changes since v1 [1]:
 - deprecate and retain aspeed,sirq-polarity-sense instead of removing it
 - drop e3c246d4i dts addition from this series

[0] https://lore.kernel.org/openbmc/20210401005702.28271-1-zev@bewilderbeest.net/
[1] https://lore.kernel.org/openbmc/20210330002338.335-1-zev@bewilderbeest.net/

Zev Weiss (4):
  dt-bindings: serial: 8250: deprecate aspeed,sirq-polarity-sense
  drivers/tty/serial/8250: refactor sirq and lpc address setting code
  drivers/tty/serial/8250: add aspeed,lpc-address and aspeed,sirq DT
    properties
  dt-bindings: serial: 8250: add aspeed,lpc-address and aspeed,sirq

 .../devicetree/bindings/serial/8250.yaml      | 28 +++++-
 drivers/tty/serial/8250/8250_aspeed_vuart.c   | 95 +++++++++++++++----
 2 files changed, 103 insertions(+), 20 deletions(-)

-- 
2.31.1