Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Message-Id: <ab0fd4477964cdbf99e3dd2965a455aa3e738e4b.1617375802.git.christophe.leroy@csgroup.eu>
In-Reply-To: <cover.1617375802.git.christophe.leroy@csgroup.eu>
References: <cover.1617375802.git.christophe.leroy@csgroup.eu>
From:   Christophe Leroy <christophe.leroy@csgroup.eu>
Subject: [PATCH v4 18/20] x86: Convert to GENERIC_CMDLINE
To:     will@kernel.org, danielwa@cisco.com, robh@kernel.org,
        daniel@gimpelevich.san-francisco.ca.us, arnd@kernel.org,
        akpm@linux-foundation.org
Cc:     linux-arch@vger.kernel.org, devicetree@vger.kernel.org,
        linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
        linuxppc-dev@lists.ozlabs.org,
        linux-arm-kernel@lists.infradead.org,
        microblaze <monstr@monstr.eu>, linux-mips@vger.kernel.org,
        nios2 <ley.foon.tan@intel.com>, openrisc@lists.librecores.org,
        linux-hexagon@vger.kernel.org, linux-riscv@lists.infradead.org,
        x86@kernel.org, linux-xtensa@linux-xtensa.org,
        linux-sh@vger.kernel.org, sparclinux@vger.kernel.org,
        linux-mm@kvack.org
Date:   Fri,  2 Apr 2021 15:18:20 +0000 (UTC)
Precedence: bulk

This converts the architecture to GENERIC_CMDLINE.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/x86/Kconfig        | 45 ++---------------------------------------
 arch/x86/kernel/setup.c | 17 ++--------------
 2 files changed, 4 insertions(+), 58 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a20684d56b4b..66b384228ca3 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -104,6 +104,7 @@ config X86
 	select ARCH_USE_QUEUED_SPINLOCKS
 	select ARCH_USE_SYM_ANNOTATIONS
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
+	select ARCH_WANT_CMDLINE_PREPEND_BY_DEFAULT
 	select ARCH_WANT_DEFAULT_BPF_JIT	if X86_64
 	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANT_HUGE_PMD_SHARE
@@ -118,6 +119,7 @@ config X86
 	select EDAC_SUPPORT
 	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST
+	select GENERIC_CMDLINE
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_CPU_VULNERABILITIES
@@ -2358,49 +2360,6 @@ choice
 
 endchoice
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
-	help
-	  Allow for specifying boot arguments to the kernel at
-	  build time.  On some systems (e.g. embedded ones), it is
-	  necessary or convenient to provide some or all of the
-	  kernel boot arguments with the kernel itself (that is,
-	  to not rely on the boot loader to provide them.)
-
-	  To compile command line arguments into the kernel,
-	  set this option to 'Y', then fill in the
-	  boot arguments in CONFIG_CMDLINE.
-
-	  Systems with fully functional boot loaders (i.e. non-embedded)
-	  should leave this option set to 'N'.
-
-config CMDLINE
-	string "Built-in kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
-	help
-	  Enter arguments here that should be compiled into the kernel
-	  image and used at boot time.  If the boot loader provides a
-	  command line at boot time, it is appended to this string to
-	  form the full kernel command line, when the system boots.
-
-	  However, you can use the CONFIG_CMDLINE_FORCE option to
-	  change this behavior.
-
-	  In most cases, the command line (whether built-in or provided
-	  by the boot loader) should specify the device for the root
-	  file system.
-
-config CMDLINE_FORCE
-	bool "Built-in command line overrides boot loader arguments"
-	depends on CMDLINE_BOOL && CMDLINE != ""
-	help
-	  Set this option to 'Y' to have the kernel ignore the boot loader
-	  command line, and use ONLY the built-in command line.
-
-	  This is used to work around broken boot loaders.  This should
-	  be set to 'N' under normal conditions.
-
 config MODIFY_LDT_SYSCALL
 	bool "Enable the LDT (local descriptor table)" if EXPERT
 	default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 6f2de58eeb54..3f274b02e51c 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -5,6 +5,7 @@
  * This file contains the setup_arch() code, which handles the architecture-dependent
  * parts of early kernel initialization.
  */
+#include <linux/cmdline.h>
 #include <linux/console.h>
 #include <linux/crash_dump.h>
 #include <linux/dma-map-ops.h>
@@ -161,9 +162,6 @@ unsigned long saved_video_mode;
 #define RAMDISK_LOAD_FLAG		0x4000
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
 
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 struct edd edd;
@@ -883,18 +881,7 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = __pa_symbol(__bss_start);
 	bss_resource.end = __pa_symbol(__bss_stop)-1;
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_FORCE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		/* append boot loader cmdline to builtin */
-		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-#endif
-#endif
+	cmdline_build(boot_command_line, boot_command_line);
 
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
-- 
2.25.0