Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 2 Apr 2021 12:26:30 -0700
From:   Matthias Kaehlcke <mka@chromium.org>
To:     satya priya <skakit@codeaurora.org>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, kgunda@codeaurora.org
Subject: Re: [PATCH V2 4/5] arm64: dts: qcom: pmr735a: Add PMIC peripherals
 for pmr735a
Message-ID: <YGdv5pKMr7jD32Le@google.com>
References: <1617268396-1837-1-git-send-email-skakit@codeaurora.org>
 <1617268396-1837-5-git-send-email-skakit@codeaurora.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <1617268396-1837-5-git-send-email-skakit@codeaurora.org>
Precedence: bulk

Same comments as '[1/5] arm64: dts: qcom: pm7325: Add PMIC peripherals
for pm7325', plus another nit:

'[3/5] arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350' has
an ADC config for the die temperature of the pmr735a, hence it seems this
patch should be before the 'pmk8350' one in this series.

On Thu, Apr 01, 2021 at 02:43:15PM +0530, satya priya wrote:
> Add temp-alarm and GPIO support for pmr735a.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/pmr735a.dtsi | 53 +++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/pmr735a.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmr735a.dtsi b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
> new file mode 100644
> index 0000000..07077fb
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pmr735a.dtsi
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +// Copyright (c) 2021, The Linux Foundation. All rights reserved.
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +&spmi_bus {
> +	pmr735a: pmic@4 {
> +		compatible = "qcom,pmr735a", "qcom,spmi-pmic";
> +		reg = <0x4 SPMI_USID>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		pmr735a_temp_alarm: temp-alarm@a00 {
> +			compatible = "qcom,spmi-temp-alarm";
> +			reg = <0xa00>;
> +			interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
> +			#thermal-sensor-cells = <0>;
> +		};
> +
> +		pmr735a_gpios: gpios@8800 {
> +			compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio";
> +			reg = <0x8800>;
> +			gpio-controller;
> +			gpio-ranges = <&pmr735a_gpios 0 0 4>;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +		};
> +	};
> +};
> +
> +&thermal_zones {
> +	pmr735a_thermal: pmr735a-thermal {
> +		polling-delay-passive = <100>;
> +		polling-delay = <0>;
> +		thermal-sensors = <&pmr735a_temp_alarm>;
> +
> +		trips {
> +			pmr735a_trip0: trip0 {
> +				temperature = <95000>;
> +				hysteresis = <0>;
> +				type = "passive";
> +			};
> +
> +			pmr735a_trip1: trip1 {
> +				temperature = <115000>;
> +				hysteresis = <0>;
> +				type = "critical";
> +			};
> +		};
> +	};
> +};
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>