Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: 3PiC3Q1BqzAnX9l+ioYr8f+irSufRX9oZ6iy3WrL3m2jwucqIbZqcq2o4ItIKNby1Hm6kkoWrP
 r0Wi9iiaX+Ug==
IronPort-SDR: dgYBW02VXqY6yw5ZcJrIYtpM4qG804xhzlIqER0n/48rsVw7K0iHOhhaKPKNQkqzRgI7Aqfw7p
 bfoDYFbGX8QQ==
From:   matthew.gerlach@linux.intel.com
To:     hao.wu@intel.com, trix@redhat.com, mdf@kernel.org,
        linux-fpga@vger.kernel.org, linux-kernel@vger.kernel.org,
        yilun.xu@intel.com, jdelvare@suse.com, linux@roeck-us.net,
        lee.jones@linaro.org, linux-hwmon@vger.kernel.org,
        russell.h.weight@linux.intel.com
Cc:     Matthew Gerlach <matthew.gerlach@linux.intel.com>
Subject: [PATCH 0/3] fpga: dfl: add support for Intel D5005 card
Date:   Mon,  5 Apr 2021 16:52:58 -0700
Message-Id: <20210405235301.187542-1-matthew.gerlach@linux.intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Matthew Gerlach <matthew.gerlach@linux.intel.com>

This patch set adds basic support for the Intel D5005 card to the
dfl driver framework.

Patch 1 adds the PCIe device id of the D5005 to the dfl-pci id table.

Patch 2 adds a dfl driver for the Altera SPI Master which is connected
to the board's BMC.

Patch 3 adds hwmon support for the sensors monitored by the board's BMC.

Matthew Gerlach (2):
  fpga: dfl: Add DFL bus driver for Altera SPI Master
  hwmon: intel-m10-bmc-hwmon: add sensor support of Intel D5005 card

Russ Weight (1):
  fpga: dfl: pci: add DID for D5005 PAC cards

 drivers/fpga/Kconfig                |   9 ++
 drivers/fpga/Makefile               |   1 +
 drivers/fpga/dfl-pci.c              |  18 +--
 drivers/fpga/dfl-spi-altera.c       | 221 ++++++++++++++++++++++++++++++++++++
 drivers/hwmon/intel-m10-bmc-hwmon.c | 122 ++++++++++++++++++++
 drivers/mfd/intel-m10-bmc.c         |  10 ++
 6 files changed, 374 insertions(+), 7 deletions(-)
 create mode 100644 drivers/fpga/dfl-spi-altera.c

-- 
1.8.3.1