Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Steven Lee <steven_lee@aspeedtech.com>
To:     Andrew Jeffery <andrew@aj.id.au>,
        Ulf Hansson <ulf.hansson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Joel Stanley <joel@jms.id.au>,
        "Adrian Hunter" <adrian.hunter@intel.com>,
        Ryan Chen <ryanchen.aspeed@gmail.com>,
        "moderated list:ASPEED SD/MMC DRIVER" <linux-aspeed@lists.ozlabs.org>,
        "moderated list:ASPEED SD/MMC DRIVER" <openbmc@lists.ozlabs.org>,
        "open list:ASPEED SD/MMC DRIVER" <linux-mmc@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        "moderated list:ARM/ASPEED MACHINE SUPPORT" 
        <linux-arm-kernel@lists.infradead.org>,
        open list <linux-kernel@vger.kernel.org>
CC:     <ryan_chen@aspeedtech.com>, <chin-ting_kuo@aspeedtech.com>
Subject: [PATCH v1 0/2] mmc: sdhci-of-aspeed: Support toggling SD bus signal
Date:   Thu, 8 Apr 2021 09:52:16 +0800
Message-ID: <20210408015218.20560-1-steven_lee@aspeedtech.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Hello,

This series implements support for toggling SD bus signal voltage by
GPIO pin.

This series has been tested on AST2600-A2 EVB with APLL and 200MHz HCLK
clock source with sdr104, sdr50, sdr25, sdr12 and high speed mode. 
This series were also be tested on AST2600-A1 EVB and AST2500 EVB that
don't have the design of signal voltage toggling by GPIO.

Please help to review.

Regards,
Steven

Steven Lee (2):
  dt-bindings: mmc: sdhci-of-aspeed: Add power-gpio and
    power-switch-gpio
  mmc: sdhci-of-aspeed: Support toggling SD bus signal voltage by GPIO

 .../devicetree/bindings/mmc/aspeed,sdhci.yaml |  25 +++
 drivers/mmc/host/sdhci-of-aspeed.c            | 155 ++++++++++++++++--
 2 files changed, 162 insertions(+), 18 deletions(-)

-- 
2.17.1