Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Johan Hovold <johan@kernel.org>
To:     Johan Hovold <johan@kernel.org>
Cc:     Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
        Manivannan Sadhasivam <mani@kernel.org>,
        linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
        Oliver Neukum <oneukum@suse.com>
Subject: [PATCH 12/12] USB: cdc-acm: add more Maxlinear/Exar models to ignore list
Date:   Mon, 12 Apr 2021 11:55:57 +0200
Message-Id: <20210412095557.1213-13-johan@kernel.org>
In-Reply-To: <20210412095557.1213-1-johan@kernel.org>
References: <20210412095557.1213-1-johan@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Now that the xr_serial got support for other models, add their USB IDs
as well.

The Maxlinear/Exar USB UARTs can be used in either ACM mode using the
cdc-acm driver or in "custom driver" mode in which further features such
as hardware and software flow control, GPIO control and in-band
line-status reporting are available.

In ACM mode the device always enables RTS/CTS flow control, something
which could prevent transmission in case the CTS input isn't wired up
correctly.

Ensure that cdc_acm will not bind to these devices if the custom
USB-serial driver is enabled.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5155887a764cbc11f8da0217fe08a24a77d120b4.1616571453.git.mchehab+huawei@kernel.org
[ johan: rewrite commit message, clean up entries ]
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
---
 drivers/usb/class/cdc-acm.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 337ffced9c40..434539b13a70 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1903,9 +1903,17 @@ static const struct usb_device_id acm_ids[] = {
 #endif
 
 #if IS_ENABLED(CONFIG_USB_SERIAL_XR)
-	{ USB_DEVICE(0x04e2, 0x1410),   /* Ignore XR21V141X USB to Serial converter */
-	.driver_info = IGNORE_DEVICE,
-	},
+	{ USB_DEVICE(0x04e2, 0x1400), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1401), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1402), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1403), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1410), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1411), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1412), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1414), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1420), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1422), .driver_info = IGNORE_DEVICE },
+	{ USB_DEVICE(0x04e2, 0x1424), .driver_info = IGNORE_DEVICE },
 #endif
 
 	/*Samsung phone in firmware update mode */
-- 
2.26.3