Message-ID: <4530A613.40007@tungstengraphics.com>
Date: Sat, 14 Oct 2006 09:55:47 +0100
From: Keith Whitwell <keith@tungstengraphics.com>
User-Agent: Thunderbird 1.5.0.7 (X11/20060922)
MIME-Version: 1.0
To: Ryan Richter <ryan@tau.solarneutrino.net>
Cc: dri-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: Re: Intel 965G: i915_dispatch_cmdbuffer failed (2.6.19-rc2)
References: <20061013194516.GB19283@tau.solarneutrino.net>
In-Reply-To: <20061013194516.GB19283@tau.solarneutrino.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 54463
Lines: 1841

Your drm module is out of date.

Keith

Ryan Richter wrote:
> I have a new Intel 965G board, and I'm trying to get DRI working.
> Direct rendering is enabled, but all GL programs crash immediately.
> The message 'DRM_I830_CMDBUFFER: -22' is printed on the tty, and the
> kernel says:
> 
> [drm:i915_cmdbuffer] *ERROR* i915_dispatch_cmdbuffer failed
> 
> Additionally, glxinfo says (in addition to its normal output):
> 
> glxinfo: bufmgr_fake.c:1245: bmReleaseBuffers: Assertion `intel->locked' failed.
> 
> This is with 2.6.19-rc2 (and -rc1). Here's a .config and dmesg:
> 
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.19-rc2
> # Fri Oct 13 13:42:19 2006
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_ZONE_DMA32=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_DMI=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
> 
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> 
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> # CONFIG_IPC_NS is not set
> # CONFIG_POSIX_MQUEUE is not set
> # CONFIG_BSD_PROCESS_ACCT is not set
> # CONFIG_TASKSTATS is not set
> # CONFIG_UTS_NS is not set
> # CONFIG_AUDIT is not set
> # CONFIG_IKCONFIG is not set
> # CONFIG_CPUSETS is not set
> CONFIG_RELAY=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> # CONFIG_SYSCTL_SYSCALL is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_SLAB=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> # CONFIG_SLOB is not set
> 
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> # CONFIG_MODVERSIONS is not set
> # CONFIG_MODULE_SRCVERSION_ALL is not set
> # CONFIG_KMOD is not set
> CONFIG_STOP_MACHINE=y
> 
> #
> # Block layer
> #
> CONFIG_BLOCK=y
> CONFIG_LBD=y
> # CONFIG_BLK_DEV_IO_TRACE is not set
> # CONFIG_LSF is not set
> 
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> CONFIG_DEFAULT_AS=y
> # CONFIG_DEFAULT_DEADLINE is not set
> # CONFIG_DEFAULT_CFQ is not set
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="anticipatory"
> 
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VSMP is not set
> # CONFIG_MK8 is not set
> CONFIG_MPSC=y
> # CONFIG_GENERIC_CPU is not set
> CONFIG_X86_L1_CACHE_BYTES=128
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_INTERNODE_CACHE_BYTES=128
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_MICROCODE=y
> CONFIG_MICROCODE_OLD_INTERFACE=y
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> CONFIG_X86_HT=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> # CONFIG_SCHED_SMT is not set
> CONFIG_SCHED_MC=y
> CONFIG_PREEMPT_NONE=y
> # CONFIG_PREEMPT_VOLUNTARY is not set
> # CONFIG_PREEMPT is not set
> CONFIG_PREEMPT_BKL=y
> # CONFIG_NUMA is not set
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_FLATMEM_ENABLE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> CONFIG_FLATMEM_MANUAL=y
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> # CONFIG_SPARSEMEM_MANUAL is not set
> CONFIG_FLATMEM=y
> CONFIG_FLAT_NODE_MEM_MAP=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_RESOURCES_64BIT=y
> CONFIG_NR_CPUS=8
> # CONFIG_HOTPLUG_CPU is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_IOMMU=y
> # CONFIG_CALGARY_IOMMU is not set
> CONFIG_SWIOTLB=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> # CONFIG_X86_MCE_AMD is not set
> # CONFIG_KEXEC is not set
> # CONFIG_CRASH_DUMP is not set
> CONFIG_PHYSICAL_START=0x200000
> CONFIG_SECCOMP=y
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> # CONFIG_REORDER is not set
> CONFIG_K8_NB=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_ISA_DMA_API=y
> CONFIG_GENERIC_PENDING_IRQ=y
> 
> #
> # Power management options
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
> # CONFIG_PM_SYSFS_DEPRECATED is not set
> 
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> # CONFIG_ACPI_AC is not set
> # CONFIG_ACPI_BATTERY is not set
> CONFIG_ACPI_BUTTON=y
> CONFIG_ACPI_VIDEO=y
> # CONFIG_ACPI_HOTKEY is not set
> CONFIG_ACPI_FAN=y
> # CONFIG_ACPI_DOCK is not set
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_THERMAL=y
> # CONFIG_ACPI_ASUS is not set
> # CONFIG_ACPI_IBM is not set
> # CONFIG_ACPI_TOSHIBA is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> # CONFIG_ACPI_CONTAINER is not set
> # CONFIG_ACPI_SBS is not set
> 
> #
> # CPU Frequency scaling
> #
> # CONFIG_CPU_FREQ is not set
> 
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCI_MMCONFIG is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_PCIEAER=y
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_MULTITHREAD_PROBE is not set
> # CONFIG_PCI_DEBUG is not set
> CONFIG_HT_IRQ=y
> 
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
> 
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
> 
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_MISC is not set
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_SYSVIPC_COMPAT=y
> 
> #
> # Networking
> #
> CONFIG_NET=y
> 
> #
> # Networking options
> #
> # CONFIG_NETDEBUG is not set
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> # CONFIG_XFRM_USER is not set
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_FIB_HASH=y
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> # CONFIG_INET_AH is not set
> # CONFIG_INET_ESP is not set
> # CONFIG_INET_IPCOMP is not set
> # CONFIG_INET_XFRM_TUNNEL is not set
> # CONFIG_INET_TUNNEL is not set
> CONFIG_INET_XFRM_MODE_TRANSPORT=y
> CONFIG_INET_XFRM_MODE_TUNNEL=y
> CONFIG_INET_XFRM_MODE_BEET=y
> CONFIG_INET_DIAG=y
> CONFIG_INET_TCP_DIAG=y
> # CONFIG_TCP_CONG_ADVANCED is not set
> CONFIG_TCP_CONG_CUBIC=y
> CONFIG_DEFAULT_TCP_CONG="cubic"
> # CONFIG_IPV6 is not set
> # CONFIG_INET6_XFRM_TUNNEL is not set
> # CONFIG_INET6_TUNNEL is not set
> # CONFIG_NETWORK_SECMARK is not set
> # CONFIG_NETFILTER is not set
> 
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP is not set
> 
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_SCTP is not set
> 
> #
> # TIPC Configuration (EXPERIMENTAL)
> #
> # CONFIG_TIPC is not set
> # CONFIG_ATM is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_VLAN_8021Q is not set
> # CONFIG_DECNET is not set
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> 
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> 
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> # CONFIG_BT is not set
> # CONFIG_IEEE80211 is not set
> 
> #
> # Device Drivers
> #
> 
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_SYS_HYPERVISOR is not set
> 
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> # CONFIG_CONNECTOR is not set
> 
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> 
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> # CONFIG_PARPORT_SERIAL is not set
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> # CONFIG_PARPORT_1284 is not set
> 
> #
> # Plug and Play support
> #
> # CONFIG_PNP is not set
> 
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_SX8 is not set
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_CDROM_PKTCDVD=y
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> # CONFIG_ATA_OVER_ETH is not set
> 
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
> 
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> 
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_ATIIXP is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT821X is not set
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> # CONFIG_BLK_DEV_VIA82CXXX is not set
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
> 
> #
> # SCSI device support
> #
> # CONFIG_RAID_ATTRS is not set
> CONFIG_SCSI=y
> # CONFIG_SCSI_NETLINK is not set
> CONFIG_SCSI_PROC_FS=y
> 
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> # CONFIG_CHR_DEV_ST is not set
> # CONFIG_CHR_DEV_OSST is not set
> # CONFIG_BLK_DEV_SR is not set
> CONFIG_CHR_DEV_SG=y
> # CONFIG_CHR_DEV_SCH is not set
> 
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> # CONFIG_SCSI_MULTI_LUN is not set
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> 
> #
> # SCSI Transports
> #
> # CONFIG_SCSI_SPI_ATTRS is not set
> # CONFIG_SCSI_FC_ATTRS is not set
> # CONFIG_SCSI_ISCSI_ATTRS is not set
> # CONFIG_SCSI_SAS_ATTRS is not set
> # CONFIG_SCSI_SAS_LIBSAS is not set
> 
> #
> # SCSI low-level drivers
> #
> # CONFIG_ISCSI_TCP is not set
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_3W_9XXX is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> # CONFIG_SCSI_AIC7XXX is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_AIC94XX is not set
> # CONFIG_SCSI_ARCMSR is not set
> # CONFIG_MEGARAID_NEWGEN is not set
> # CONFIG_MEGARAID_LEGACY is not set
> # CONFIG_MEGARAID_SAS is not set
> # CONFIG_SCSI_HPTIOP is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_STEX is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_QLA_FC is not set
> # CONFIG_SCSI_QLA_ISCSI is not set
> # CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
> 
> #
> # Serial ATA (prod) and Parallel ATA (experimental) drivers
> #
> CONFIG_ATA=y
> CONFIG_SATA_AHCI=y
> # CONFIG_SATA_SVW is not set
> CONFIG_ATA_PIIX=y
> # CONFIG_SATA_MV is not set
> # CONFIG_SATA_NV is not set
> # CONFIG_PDC_ADMA is not set
> # CONFIG_SATA_QSTOR is not set
> # CONFIG_SATA_PROMISE is not set
> # CONFIG_SATA_SX4 is not set
> # CONFIG_SATA_SIL is not set
> # CONFIG_SATA_SIL24 is not set
> # CONFIG_SATA_SIS is not set
> # CONFIG_SATA_ULI is not set
> # CONFIG_SATA_VIA is not set
> # CONFIG_SATA_VITESSE is not set
> CONFIG_SATA_INTEL_COMBINED=y
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> CONFIG_PATA_MPIIX=y
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> # CONFIG_PATA_PDC2027X is not set
> # CONFIG_PATA_SIL680 is not set
> # CONFIG_PATA_SIS is not set
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> 
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> 
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_SPI is not set
> # CONFIG_FUSION_FC is not set
> # CONFIG_FUSION_SAS is not set
> 
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
> 
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> 
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> 
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> 
> #
> # PHY device support
> #
> 
> #
> # Ethernet (10 or 100Mbit)
> #
> # CONFIG_NET_ETHERNET is not set
> 
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> CONFIG_E1000=y
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SKGE is not set
> # CONFIG_SKY2 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_BNX2 is not set
> # CONFIG_QLA3XXX is not set
> 
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_CHELSIO_T1 is not set
> # CONFIG_IXGB is not set
> # CONFIG_S2IO is not set
> # CONFIG_MYRI10GE is not set
> 
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> 
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> 
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
> # CONFIG_NET_FC is not set
> # CONFIG_SHAPER is not set
> # CONFIG_NETCONSOLE is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> 
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
> 
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> 
> #
> # Input device support
> #
> CONFIG_INPUT=y
> # CONFIG_INPUT_FF_MEMLESS is not set
> 
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
> 
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_SERIAL is not set
> # CONFIG_MOUSE_VSXXXAA is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
> 
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> # CONFIG_SERIO_SERPORT is not set
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> # CONFIG_SERIO_RAW is not set
> # CONFIG_GAMEPORT is not set
> 
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_VT_HW_CONSOLE_BINDING is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> 
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> # CONFIG_SERIAL_8250_EXTENDED is not set
> 
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> # CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
> 
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
> 
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_INTEL=y
> # CONFIG_HW_RANDOM_AMD is not set
> # CONFIG_HW_RANDOM_GEODE is not set
> # CONFIG_NVRAM is not set
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> 
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_VIA is not set
> CONFIG_DRM=y
> # CONFIG_DRM_TDFX is not set
> # CONFIG_DRM_R128 is not set
> # CONFIG_DRM_RADEON is not set
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> CONFIG_DRM_I915=y
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
> # CONFIG_DRM_VIA is not set
> # CONFIG_DRM_SAVAGE is not set
> # CONFIG_MWAVE is not set
> # CONFIG_PC8736x_GPIO is not set
> # CONFIG_RAW_DRIVER is not set
> CONFIG_HPET=y
> # CONFIG_HPET_RTC_IRQ is not set
> CONFIG_HPET_MMAP=y
> # CONFIG_HANGCHECK_TIMER is not set
> 
> #
> # TPM devices
> #
> # CONFIG_TCG_TPM is not set
> # CONFIG_TELCLOCK is not set
> 
> #
> # I2C support
> #
> CONFIG_I2C=y
> CONFIG_I2C_CHARDEV=y
> 
> #
> # I2C Algorithms
> #
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
> # CONFIG_I2C_ALGOPCA is not set
> 
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> CONFIG_I2C_AMD756=y
> # CONFIG_I2C_AMD756_S4882 is not set
> CONFIG_I2C_AMD8111=y
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_I810 is not set
> # CONFIG_I2C_PIIX4 is not set
> CONFIG_I2C_ISA=y
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_PARPORT is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> # CONFIG_I2C_STUB is not set
> # CONFIG_I2C_VIA is not set
> # CONFIG_I2C_VIAPRO is not set
> # CONFIG_I2C_VOODOO3 is not set
> # CONFIG_I2C_PCA_ISA is not set
> 
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_SENSORS_DS1337 is not set
> # CONFIG_SENSORS_DS1374 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_SENSORS_PCA9539 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_MAX6875 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> 
> #
> # SPI support
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
> 
> #
> # Dallas's 1-wire bus
> #
> 
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=y
> CONFIG_HWMON_VID=y
> # CONFIG_SENSORS_ABITUGURU is not set
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_ADM1025 is not set
> # CONFIG_SENSORS_ADM1026 is not set
> # CONFIG_SENSORS_ADM1031 is not set
> # CONFIG_SENSORS_ADM9240 is not set
> # CONFIG_SENSORS_K8TEMP is not set
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_ATXP1 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_F71805F is not set
> # CONFIG_SENSORS_FSCHER is not set
> # CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_GL518SM is not set
> # CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> # CONFIG_SENSORS_LM77 is not set
> # CONFIG_SENSORS_LM78 is not set
> # CONFIG_SENSORS_LM80 is not set
> # CONFIG_SENSORS_LM83 is not set
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> # CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_SMSC47M192 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_VT1211 is not set
> # CONFIG_SENSORS_VT8231 is not set
> # CONFIG_SENSORS_W83781D is not set
> # CONFIG_SENSORS_W83791D is not set
> # CONFIG_SENSORS_W83792D is not set
> # CONFIG_SENSORS_W83L785TS is not set
> CONFIG_SENSORS_W83627HF=y
> # CONFIG_SENSORS_W83627EHF is not set
> # CONFIG_SENSORS_HDAPS is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> 
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
> # CONFIG_TIFM_CORE is not set
> 
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> 
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> # CONFIG_USB_DABUSB is not set
> 
> #
> # Graphics support
> #
> CONFIG_FIRMWARE_EDID=y
> # CONFIG_FB is not set
> 
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_VGACON_SOFT_SCROLLBACK is not set
> # CONFIG_VIDEO_SELECT is not set
> CONFIG_DUMMY_CONSOLE=y
> # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
> 
> #
> # Sound
> #
> # CONFIG_SOUND is not set
> 
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> 
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
> 
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=y
> # CONFIG_USB_EHCI_SPLIT_ISO is not set
> # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
> # CONFIG_USB_EHCI_TT_NEWSCHED is not set
> # CONFIG_USB_ISP116X_HCD is not set
> CONFIG_USB_OHCI_HCD=y
> # CONFIG_USB_OHCI_BIG_ENDIAN is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=y
> # CONFIG_USB_SL811_HCD is not set
> 
> #
> # USB Device Class drivers
> #
> # CONFIG_USB_ACM is not set
> # CONFIG_USB_PRINTER is not set
> 
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
> 
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=y
> # CONFIG_USB_STORAGE_DEBUG is not set
> # CONFIG_USB_STORAGE_DATAFAB is not set
> # CONFIG_USB_STORAGE_FREECOM is not set
> # CONFIG_USB_STORAGE_ISD200 is not set
> # CONFIG_USB_STORAGE_DPCM is not set
> # CONFIG_USB_STORAGE_USBAT is not set
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_SDDR55 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> # CONFIG_USB_STORAGE_ALAUDA is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_LIBUSUAL is not set
> 
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_USB_HIDINPUT_POWERBOOK is not set
> # CONFIG_HID_FF is not set
> # CONFIG_USB_HIDDEV is not set
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_ACECAD is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_TOUCHSCREEN is not set
> # CONFIG_USB_YEALINK is not set
> # CONFIG_USB_XPAD is not set
> # CONFIG_USB_ATI_REMOTE is not set
> # CONFIG_USB_ATI_REMOTE2 is not set
> # CONFIG_USB_KEYSPAN_REMOTE is not set
> # CONFIG_USB_APPLETOUCH is not set
> # CONFIG_USB_TRANCEVIBRATOR is not set
> 
> #
> # USB Imaging devices
> #
> # CONFIG_USB_MDC800 is not set
> # CONFIG_USB_MICROTEK is not set
> 
> #
> # USB Network Adapters
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
> CONFIG_USB_MON=y
> 
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
> 
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
> 
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI62 is not set
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_LEGOTOWER is not set
> # CONFIG_USB_LCD is not set
> # CONFIG_USB_LED is not set
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> # CONFIG_USB_PHIDGET is not set
> # CONFIG_USB_IDMOUSE is not set
> # CONFIG_USB_FTDI_ELAN is not set
> # CONFIG_USB_APPLEDISPLAY is not set
> # CONFIG_USB_SISUSBVGA is not set
> # CONFIG_USB_LD is not set
> # CONFIG_USB_TEST is not set
> 
> #
> # USB DSL modem support
> #
> 
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
> 
> #
> # MMC/SD Card support
> #
> # CONFIG_MMC is not set
> 
> #
> # LED devices
> #
> # CONFIG_NEW_LEDS is not set
> 
> #
> # LED drivers
> #
> 
> #
> # LED Triggers
> #
> 
> #
> # InfiniBand support
> #
> # CONFIG_INFINIBAND is not set
> 
> #
> # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> #
> CONFIG_EDAC=y
> 
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=y
> # CONFIG_EDAC_E752X is not set
> CONFIG_EDAC_POLL=y
> 
> #
> # Real Time Clock
> #
> CONFIG_RTC_LIB=y
> CONFIG_RTC_CLASS=y
> CONFIG_RTC_HCTOSYS=y
> CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
> # CONFIG_RTC_DEBUG is not set
> 
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> 
> #
> # RTC drivers
> #
> # CONFIG_RTC_DRV_X1205 is not set
> # CONFIG_RTC_DRV_DS1307 is not set
> # CONFIG_RTC_DRV_DS1553 is not set
> # CONFIG_RTC_DRV_ISL1208 is not set
> # CONFIG_RTC_DRV_DS1672 is not set
> # CONFIG_RTC_DRV_DS1742 is not set
> # CONFIG_RTC_DRV_PCF8563 is not set
> # CONFIG_RTC_DRV_PCF8583 is not set
> # CONFIG_RTC_DRV_RS5C372 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_TEST is not set
> # CONFIG_RTC_DRV_V3020 is not set
> 
> #
> # DMA Engine support
> #
> CONFIG_DMA_ENGINE=y
> 
> #
> # DMA Clients
> #
> CONFIG_NET_DMA=y
> 
> #
> # DMA Devices
> #
> CONFIG_INTEL_IOATDMA=y
> 
> #
> # Firmware Drivers
> #
> # CONFIG_EDD is not set
> # CONFIG_DELL_RBU is not set
> # CONFIG_DCDBAS is not set
> 
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> # CONFIG_EXT2_FS_XIP is not set
> CONFIG_EXT3_FS=y
> # CONFIG_EXT3_FS_XATTR is not set
> # CONFIG_EXT4DEV_FS is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> # CONFIG_FS_POSIX_ACL is not set
> # CONFIG_XFS_FS is not set
> # CONFIG_GFS2_FS is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> # CONFIG_QUOTA is not set
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_FUSE_FS is not set
> 
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> # CONFIG_ZISOFS is not set
> # CONFIG_UDF_FS is not set
> 
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
> # CONFIG_NTFS_FS is not set
> 
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_POSIX_ACL is not set
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
> # CONFIG_CONFIGFS_FS is not set
> 
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> 
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=y
> CONFIG_NFS_V3=y
> # CONFIG_NFS_V3_ACL is not set
> # CONFIG_NFS_V4 is not set
> # CONFIG_NFS_DIRECTIO is not set
> # CONFIG_NFSD is not set
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> # CONFIG_SMB_FS is not set
> # CONFIG_CIFS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
> 
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> 
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> # CONFIG_NLS_CODEPAGE_850 is not set
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> # CONFIG_NLS_ASCII is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
> 
> #
> # Instrumentation Support
> #
> # CONFIG_PROFILING is not set
> # CONFIG_KPROBES is not set
> 
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_KERNEL=y
> CONFIG_LOG_BUF_SHIFT=17
> # CONFIG_DETECT_SOFTLOCKUP is not set
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_RWSEMS is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_DEBUG_KOBJECT is not set
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_FS is not set
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_LIST is not set
> # CONFIG_FRAME_POINTER is not set
> # CONFIG_UNWIND_INFO is not set
> CONFIG_FORCED_INLINING=y
> # CONFIG_HEADERS_CHECK is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_DEBUG_RODATA is not set
> # CONFIG_IOMMU_DEBUG is not set
> # CONFIG_DEBUG_STACKOVERFLOW is not set
> # CONFIG_DEBUG_STACK_USAGE is not set
> 
> #
> # Security options
> #
> # CONFIG_KEYS is not set
> # CONFIG_SECURITY is not set
> 
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
> 
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> # CONFIG_CRC16 is not set
> # CONFIG_CRC32 is not set
> # CONFIG_LIBCRC32C is not set
> CONFIG_PLIST=y
> 
> 
> 
> Linux version 2.6.19-rc2 (root@xarello) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Fri Oct 13 13:49:46 EDT 2006
> Command line: root=/dev/ram0 initrd=image.gz BOOT_IMAGE=bzimage 
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
>  BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000007e599000 (usable)
>  BIOS-e820: 000000007e599000 - 000000007e5a6000 (reserved)
>  BIOS-e820: 000000007e5a6000 - 000000007e658000 (usable)
>  BIOS-e820: 000000007e658000 - 000000007e6a8000 (ACPI NVS)
>  BIOS-e820: 000000007e6a8000 - 000000007e6ac000 (ACPI data)
>  BIOS-e820: 000000007e6ac000 - 000000007e6f2000 (ACPI NVS)
>  BIOS-e820: 000000007e6f2000 - 000000007e6ff000 (ACPI data)
>  BIOS-e820: 000000007e6ff000 - 000000007e700000 (usable)
>  BIOS-e820: 000000007e700000 - 000000007f000000 (reserved)
>  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 143) 0 entries of 256 used
> Entering add_active_range(0, 256, 517529) 1 entries of 256 used
> Entering add_active_range(0, 517542, 517720) 2 entries of 256 used
> Entering add_active_range(0, 517887, 517888) 3 entries of 256 used
> end_pfn_map = 1048576
> DMI 2.4 present.
> ACPI: RSDP (v000 INTEL                                 ) @ 0x00000000000fe020
> ACPI: RSDT (v001 INTEL  DG965RY  0x000004d1      0x01000013) @ 0x000000007e6fd038
> ACPI: FADT (v001 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x000000007e6fc000
> ACPI: MADT (v001 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x000000007e6f6000
> ACPI: WDDT (v001 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x000000007e6f5000
> ACPI: MCFG (v001 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x000000007e6f4000
> ACPI: ASF! (v032 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x000000007e6f3000
> ACPI: SSDT (v001 INTEL     CpuPm 0x000004d1 MSFT 0x01000013) @ 0x000000007e6f2000
> ACPI: SSDT (v001 INTEL   Cpu0Ist 0x000004d1 MSFT 0x01000013) @ 0x000000007e6ab000
> ACPI: SSDT (v001 INTEL   Cpu1Ist 0x000004d1 MSFT 0x01000013) @ 0x000000007e6aa000
> ACPI: SSDT (v001 INTEL   Cpu2Ist 0x000004d1 MSFT 0x01000013) @ 0x000000007e6a9000
> ACPI: SSDT (v001 INTEL   Cpu3Ist 0x000004d1 MSFT 0x01000013) @ 0x000000007e6a8000
> ACPI: DSDT (v001 INTEL  DG965RY  0x000004d1 MSFT 0x01000013) @ 0x0000000000000000
> Entering add_active_range(0, 0, 143) 0 entries of 256 used
> Entering add_active_range(0, 256, 517529) 1 entries of 256 used
> Entering add_active_range(0, 517542, 517720) 2 entries of 256 used
> Entering add_active_range(0, 517887, 517888) 3 entries of 256 used
> Zone PFN ranges:
>   DMA             0 ->     4096
>   DMA32        4096 ->  1048576
>   Normal    1048576 ->  1048576
> early_node_map[4] active PFN ranges
>     0:        0 ->      143
>     0:      256 ->   517529
>     0:   517542 ->   517720
>     0:   517887 ->   517888
> On node 0 totalpages: 517595
>   DMA zone: 56 pages used for memmap
>   DMA zone: 1088 pages reserved
>   DMA zone: 2839 pages, LIFO batch:0
>   DMA32 zone: 7024 pages used for memmap
>   DMA32 zone: 506588 pages, LIFO batch:31
>   Normal zone: 0 pages used for memmap
> ACPI: PM-Timer IO Port: 0x408
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
> ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Nosave address range: 000000000008f000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e0000
> Nosave address range: 00000000000e0000 - 0000000000100000
> Nosave address range: 000000007e599000 - 000000007e5a6000
> Nosave address range: 000000007e658000 - 000000007e6a8000
> Nosave address range: 000000007e6a8000 - 000000007e6ac000
> Nosave address range: 000000007e6ac000 - 000000007e6f2000
> Nosave address range: 000000007e6f2000 - 000000007e6ff000
> Allocating PCI resources starting at 80000000 (gap: 7f000000:80f00000)
> PERCPU: Allocating 33536 bytes of per cpu data
> Built 1 zonelists.  Total pages: 509427
> Kernel command line: root=/dev/ram0 initrd=image.gz BOOT_IMAGE=bzimage 
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Checking aperture...
> Memory: 2032960k/2071552k available (2411k kernel code, 36808k reserved, 1191k data, 220k init)
> Calibrating delay using timer specific routine.. 5863.02 BogoMIPS (lpj=2931512)
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> using mwait in idle threads.
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> Freeing SMP alternatives: 28k freed
> ACPI: Core revision 20060707
> Using local APIC timer interrupts.
> result 16650261
> Detected 16.650 MHz APIC timer.
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5859.92 BogoMIPS (lpj=2929960)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 4096K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> Intel(R) Core(TM)2 CPU         X6800  @ 2.93GHz stepping 06
> Brought up 2 CPUs
> testing NMI watchdog ... OK.
> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
> time.c: Detected 2930.446 MHz processor.
> migration_cost=16
> checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
> Freeing initrd memory: 886k freed
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
> Boot video device is 0000:00:02.0
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> PCI-GART: No AMD northbridge found.
> PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
> PCI: Bridge: 0000:00:1c.0
>   IO window: disabled.
>   MEM window: 90500000-905fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.1
>   IO window: 1000-1fff
>   MEM window: 90100000-901fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.2
>   IO window: disabled.
>   MEM window: 90600000-906fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.3
>   IO window: disabled.
>   MEM window: 90700000-907fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1c.4
>   IO window: disabled.
>   MEM window: 90800000-908fffff
>   PREFETCH window: disabled.
> PCI: Bridge: 0000:00:1e.0
>   IO window: disabled.
>   MEM window: 90000000-900fffff
>   PREFETCH window: disabled.
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1c.3 to 64
> ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
> io scheduler noop registered
> io scheduler anticipatory registered (default)
> io scheduler deadline registered
> io scheduler cfq registered
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.0:pcie00]
> Allocate Port Service[0000:00:1c.0:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.1:pcie00]
> Allocate Port Service[0000:00:1c.1:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.2 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.2:pcie00]
> Allocate Port Service[0000:00:1c.2:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.3 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.3:pcie00]
> Allocate Port Service[0000:00:1c.3:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.4 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.4:pcie00]
> Allocate Port Service[0000:00:1c.4:pcie02]
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: Getting cpuindex for acpiid 0x3
> ACPI: Getting cpuindex for acpiid 0x4
> lp: driver loaded but no devices found
> Real Time Clock Driver v1.12ac
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected an Intel 965G Chipset.
> agpgart: Detected 7676K stolen memory.
> agpgart: AGP aperture is 256M @ 0x80000000
> [drm] Initialized drm 1.0.1 20051102
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
> [drm] Initialized i915 1.5.0 20060119 on minor 0
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> parport0: PC-style at 0x378 (0x778) [PCSPP(,...)]
> parport0: irq 7 detected
> lp0: using parport0 (polling).
> floppy0: no floppy controllers found
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> Intel(R) PRO/1000 Network Driver - version 7.2.9-k2-NAPI
> Copyright (c) 1999-2006 Intel Corporation.
> ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
> PCI: Setting latency timer of device 0000:00:19.0 to 64
> e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:76:ba:e9:17
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Probing IDE interface ide0...
> Probing IDE interface ide1...
> libata version 2.00 loaded.
> ata_piix 0000:00:1f.2: version 2.00ac6
> ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x2138 ctl 0x2156 bmdma 0x2110 irq 19
> ata2: SATA max UDMA/133 cmd 0x2130 ctl 0x2152 bmdma 0x2118 irq 19
> scsi0 : ata_piix
> ATA: abnormal status 0x7F on port 0x213F
> scsi1 : ata_piix
> ATA: abnormal status 0x7F on port 0x2137
> ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> ACPI: PCI Interrupt 0000:00:1f.5[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> ata3: SATA max UDMA/133 cmd 0x2128 ctl 0x214E bmdma 0x20F0 irq 19
> ata4: SATA max UDMA/133 cmd 0x2120 ctl 0x214A bmdma 0x20F8 irq 19
> scsi2 : ata_piix
> ATA: abnormal status 0x7F on port 0x212F
> scsi3 : ata_piix
> ATA: abnormal status 0x7F on port 0x2127
> usbmon: debugfs is not available
> ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1a.7 to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1a.7
> ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90425400
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90425000
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:1a.0 to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020a0
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
> PCI: Setting latency timer of device 0000:00:1a.1 to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1a.1: irq 21, io base 0x00002080
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002060
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb 2-6: new high speed USB device using ehci_hcd and address 2
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002040
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> usb 2-6: configuration #1 chosen from 1 choice
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002020
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> Initializing USB Mass Storage driver...
> scsi4 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new interface driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> i2c /dev entries driver
> EDAC MC: Ver: 2.0.1 Oct 13 2006
> TCP cubic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
> RAMDISK: Compressed image found at block 0
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 220k freed
> scsi 4:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  2.18 PQ: 0 ANSI: 2
> SCSI device sda: 990865 512-byte hdwr sectors (507 MB)
> sda: Write Protect is off
> sda: Mode Sense: 03 00 00 00
> sda: assuming drive cache: write through
> SCSI device sda: 990865 512-byte hdwr sectors (507 MB)
> sda: Write Protect is off
> sda: Mode Sense: 03 00 00 00
> sda: assuming drive cache: write through
>  sda: sda1 sda2
> sd 4:0:0:0: Attached scsi removable disk sda
> sd 4:0:0:0: Attached scsi generic sg0 type 0
> usb-storage: device scan complete
> e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
> process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
> wmint[3196]: segfault at 0000000000000000 rip 00002b309a797e34 rsp 00007fff1081cb60 error 4
> wmpager[3197]: segfault at 0000000000000000 rip 0000000000404171 rsp 00007fff4efc0270 error 4
> wmpager[3492]: segfault at 0000000000000000 rip 0000000000404171 rsp 00007fff7c9bb190 error 4
> wmint[3491]: segfault at 0000000000000000 rip 00002b44ed0bde34 rsp 00007fffbdef7e40 error 4
> [drm:i915_cmdbuffer] *ERROR* i915_dispatch_cmdbuffer failed
> [drm:i915_cmdbuffer] *ERROR* i915_dispatch_cmdbuffer failed
> SysRq : Keyboard mode set to XLATE
> SysRq : Keyboard mode set to XLATE
> 
> 
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> --
> _______________________________________________
> Dri-devel mailing list
> Dri-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/dri-devel
> 

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/