Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
IronPort-SDR: 2e/AUsNAPQr7mJD+5DSsCm5keX4mMKfwTKyCUPt60W/Kob4p3cOY+jffhMGTQj1YHWGKT9jcra
 mtcJ84kfN5UTe7pdj4bWzmL0PV6QcgDw0nfZRaxkO4If0U9sOMejk86Q0G6EqcS2vobYbR1bXF
 urNLIOuhIeWjR0BocgLQm6mLhNdqLz7jTtC587yw5W/YIUUaIZ5gTY7BLtmzqjIdv/WjtBydpF
 zkFSXU8J3NG1TQh7qXhnU0ya3dFxIHVqUS1WEz8SzWrw4g00xbV+tW4+9fPjnULuHB1b1swfv2
 DmQ=
From:   Eugen Hristev <eugen.hristev@microchip.com>
To:     <devicetree@vger.kernel.org>, <linux-media@vger.kernel.org>,
        <jacopo@jmondi.org>, <robh+dt@kernel.org>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>,
        Eugen Hristev <eugen.hristev@microchip.com>
Subject: [PATCH v3 30/33] dt-bindings: media: add microchip,xisc device bindings
Date:   Tue, 13 Apr 2021 13:57:28 +0300
Message-ID: <20210413105731.610028-31-eugen.hristev@microchip.com>
In-Reply-To: <20210413105731.610028-1-eugen.hristev@microchip.com>
References: <20210413105731.610028-1-eugen.hristev@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Add bindings for the Microchip eXtended Image Sensor Controller.
Based on the atmel,isc.yaml binding.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
---
 .../bindings/media/microchip,xisc.yaml        | 129 ++++++++++++++++++
 1 file changed, 129 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/microchip,xisc.yaml

diff --git a/Documentation/devicetree/bindings/media/microchip,xisc.yaml b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
new file mode 100644
index 000000000000..e3825c4e13f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/microchip,xisc.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2021 Microchip Technology, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/microchip,xisc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip eXtended Image Sensor Controller (XISC)
+
+maintainers:
+  - Eugen Hristev <eugen.hristev@microchip.com>
+
+description:
+  The eXtended Image Sensor Controller (XISC) device provides the video input capabilities for the
+  Microchip AT91 SAM family of devices.
+
+  The XISC has a single internal parallel input that supports RAW Bayer, RGB or YUV video.
+  The source can be either a demuxer from a CSI2 type of bus, or a simple direct bridge to a
+  parallel sensor.
+
+  The XISC provides one clock output that is used to clock the demuxer/bridge.
+
+properties:
+  compatible:
+    const: microchip,sama7g5-isc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: hclock
+
+  '#clock-cells':
+    const: 0
+
+  clock-output-names:
+    const: isc-mck
+
+  microchip,mipi-mode:
+    type: boolean
+    description:
+      As the XISC is usually connected to a demux/bridge, the XISC receives
+      the same type of input, however, it should be aware of the type of
+      signals received. The mipi-mode enables different internal handling
+      of the data and clock lines.
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Input port node, single endpoint describing the input pad.
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          remote-endpoint: true
+
+          bus-width:
+            enum: [8, 9, 10, 11, 12]
+            default: 12
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        required:
+          - remote-endpoint
+          - bus-type
+
+        additionalProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+  - clock-output-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/at91.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    xisc: xisc@e1408000 {
+        compatible = "microchip,sama7g5-isc";
+        reg = <0xe1408000 0x2000>;
+        interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&pmc PMC_TYPE_PERIPHERAL 56>;
+        clock-names = "hclock";
+        #clock-cells = <0>;
+        clock-output-names = "isc-mck";
+
+        port {
+                xisc_in: endpoint {
+                       bus-type = <5>; /* Parallel */
+                       remote-endpoint = <&csi2dc_out>;
+                       hsync-active = <1>;
+                       vsync-active = <1>;
+                       bus-width = <12>;
+                };
+        };
+    };
+
-- 
2.25.1