Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     jonas@kwiboo.se, jernej.skrabec@siol.net, robert.foss@linaro.org,
        Laurent.pinchart@ideasonboard.com
Cc:     dri-devel@lists.freedesktop.org, linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 0/2] drm/bridge: dw-hdmi: disable loading of DW-HDMI CEC sub-driver
Date:   Fri, 16 Apr 2021 11:27:35 +0200
Message-Id: <20210416092737.1971876-1-narmstrong@baylibre.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver.

On some SoCs, the CEC functionality is enabled in the IP config bits, but the
CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set
but the DW-HDMI CEC signal is not connected to a physical pin, leading to some
confusion when the DW-HDMI CEC controller can't communicate on the bus.

Jernej Skrabec (1):
  drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC
    driver

Neil Armstrong (1):
  drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driver

 drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +-
 drivers/gpu/drm/meson/meson_dw_hdmi.c     | 1 +
 include/drm/bridge/dw_hdmi.h              | 2 ++
 3 files changed, 4 insertions(+), 1 deletion(-)

-- 
2.25.1