Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Subject: Re: [PATCH v2 0/2] MCAN: Add support for implementing transceiver as
 a phy
CC:     <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-can@vger.kernel.org>, <netdev@vger.kernel.org>,
        Marc Kleine-Budde <mkl@pengutronix.de>,
        Wolfgang Grandegger <wg@grandegger.com>,
        Rob Herring <robh+dt@kernel.org>,
        "David S . Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>,
        Chandrasekar Ramakrishnan <rcsekar@samsung.com>,
        Kishon Vijay Abraham I <kishon@ti.com>,
        Lokesh Vutla <lokeshvutla@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Grygorii Strashko <grygorii.strashko@ti.com>,
        Faiz Abbas <faiz_abbas@ti.com>
References: <20210415154635.30094-1-a-govindraju@ti.com>
From:   Aswath Govindraju <a-govindraju@ti.com>
Message-ID: <2743eef1-6e20-28e5-769a-26ae8eb15dd6@ti.com>
Date:   Fri, 16 Apr 2021 17:15:04 +0530
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101
 Thunderbird/68.10.0
MIME-Version: 1.0
In-Reply-To: <20210415154635.30094-1-a-govindraju@ti.com>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

Hi all,

On 15/04/21 9:16 pm, Aswath Govindraju wrote:
> The following series of patches add support for implementing the
> transceiver as a phy of m_can_platform driver.
> 
> TCAN1042 has a standby signal that needs to be pulled high for
> sending/receiving messages[1]. TCAN1043 has a enable signal along with
> standby signal that needs to be pulled up for sending/receiving
> messages[2], and other combinations of the two lines can be used to put the
> transceiver in different states to reduce power consumption. On boards
> like the AM654-idk and J721e-evm these signals are controlled using gpios.
> 
> These gpios are set in phy driver, and the transceiver can be put in
> different states using phy API. The phy driver is added in the series [3].
> 
> This patch series is dependent on [4].
> 
> Changes since v1:
> - Used the API devm_phy_get_optional() instead of 
>   devm_of_phy_get_optional_by_index()
> 
> [1] - https://www.ti.com/lit/ds/symlink/tcan1042h.pdf
> [2] - https://www.ti.com/lit/ds/symlink/tcan1043-q1.pdf
> [3] - https://lore.kernel.org/patchwork/project/lkml/list/?series=495365
> [4] - https://lore.kernel.org/patchwork/patch/1413286/
> 

Posted v3 for this series.

Thanks,
Aswath

> Faiz Abbas (2):
>   dt-bindings: net: can: Document transceiver implementation as phy
>   can: m_can: Add support for transceiver as phy
> 
>  .../devicetree/bindings/net/can/bosch,m_can.yaml    |  3 +++
>  drivers/net/can/m_can/m_can.c                       | 10 ++++++++++
>  drivers/net/can/m_can/m_can.h                       |  2 ++
>  drivers/net/can/m_can/m_can_platform.c              | 13 +++++++++++++
>  4 files changed, 28 insertions(+)
>