Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Tue, 20 Apr 2021 22:47:29 +0530
From:   Deepak R Varma <mh12gx2825@gmail.com>
To:     Fabio Aiuto <fabioaiuto83@gmail.com>
Cc:     Mauro Carvalho Chehab <mchehab@kernel.org>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        linux-media@vger.kernel.org, linux-staging@lists.linux.dev,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/6] staging: media: atomisp: reformat code comment blocks
Message-ID: <20210420171729.GB193332@localhost>
References: <cover.1618859059.git.drv@mailo.com>
 <7cf7b8253550460e7273c94bae005939000679fd.1618859059.git.drv@mailo.com>
 <20210420084448.GC1411@agape.jhs>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20210420084448.GC1411@agape.jhs>
Precedence: bulk

On Tue, Apr 20, 2021 at 10:44:48AM +0200, Fabio Aiuto wrote:
> On Tue, Apr 20, 2021 at 12:45:04AM +0530, Deepak R Varma wrote:
> > Reformat code comment blocks according to the coding style guidelines.
> > This resolves different checkpatch script WARNINGs around block comments.
> > 
> > Signed-off-by: Deepak R Varma <drv@mailo.com>
> > ---
> >  .../media/atomisp/i2c/atomisp-gc2235.c        |  8 +++----
> >  .../atomisp/i2c/atomisp-libmsrlisthelper.c    |  3 ++-
> >  .../media/atomisp/i2c/atomisp-mt9m114.c       | 22 +++++++++++--------
> >  .../media/atomisp/i2c/atomisp-ov2680.c        |  3 ++-
> >  4 files changed, 21 insertions(+), 15 deletions(-)
> > 
> > diff --git a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> > index 548c572d3b57..a585d73665a6 100644
> > --- a/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> > +++ b/drivers/staging/media/atomisp/i2c/atomisp-gc2235.c
> > @@ -747,10 +747,10 @@ static int startup(struct v4l2_subdev *sd)
> >  
> >  	if (is_init == 0) {
> >  		/* force gc2235 to do a reset in res change, otherwise it
> > -		* can not output normal after switching res. and it is not
> > -		* necessary for first time run up after power on, for the sack
> > -		* of performance
> > -		*/
> > +		 * can not output normal after switching res. and it is not
> > +		 * necessary for first time run up after power on, for the sack
> > +		 * of performance
> > +		 */
> >  		power_down(sd);
> >  		power_up(sd);
> >  		gc2235_write_reg_array(client, gc2235_init_settings);
> > diff --git a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
> > index b93c80471f22..750b3484eb19 100644
> > --- a/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
> > +++ b/drivers/staging/media/atomisp/i2c/atomisp-libmsrlisthelper.c
> > @@ -57,7 +57,8 @@ static int set_msr_configuration(struct i2c_client *client, uint8_t *bufptr,
> >  	 * By convention, the first two bytes of actual data should be
> >  	 * understood as an address in the sensor address space (hibyte
> >  	 * followed by lobyte) where the remaining data in the sequence
> > -	 * will be written. */
> > +	 * will be written.
> > +	 */
> >  
> >  	u8 *ptr = bufptr;
> >  
> > diff --git a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
> > index 465fc4468442..160bb58ce708 100644
> > --- a/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
> > +++ b/drivers/staging/media/atomisp/i2c/atomisp-mt9m114.c
> > @@ -478,7 +478,8 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
> >  	/* Note: current modules wire only one GPIO signal (RESET#),
> >  	 * but the schematic wires up two to the connector.  BIOS
> >  	 * versions have been unfortunately inconsistent with which
> > -	 * ACPI index RESET# is on, so hit both */
> > +	 * ACPI index RESET# is on, so hit both
> > +	 */
> >  
> >  	if (flag) {
> >  		ret = dev->platform_data->gpio0_ctrl(sd, 0);
> > @@ -1019,8 +1020,8 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
> >  		dev->first_gain = AnalogGain;
> >  		dev->first_diggain = DigitalGain;
> >  	}
> > -	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +
> > -	((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8); */
> > +	/* DigitalGain = 0x400 * (((u16) DigitalGain) >> 8) +		*/
> > +	/* ((unsigned int)(0x400 * (((u16) DigitalGain) & 0xFF)) >>8);	*/
> >  
> >  	/* set frame length */
> >  	if (FLines < coarse_integration + 6)
> > @@ -1035,7 +1036,8 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
> >  
> >  	/* set coarse integration */
> >  	/* 3A provide real exposure time.
> > -		should not translate to any value here. */
> > +	 * should not translate to any value here.
> > +	 */
> >  	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
> >  				REG_EXPO_COARSE, (u16)(coarse_integration));
> >  	if (ret) {
> > @@ -1044,7 +1046,7 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
> >  	}
> >  
> >  	/*
> > -	// set analog/digital gain
> > +	 * set analog/digital gain
> >  	switch(AnalogGain)
> >  	{
> >  	case 0:
> > @@ -1069,8 +1071,9 @@ static long mt9m114_s_exposure(struct v4l2_subdev *sd,
> >  	*/
> >  	if (DigitalGain >= 16 || DigitalGain <= 1)
> >  		DigitalGain = 1;
> > -	/* AnalogGainToWrite =
> > -		(u16)((DigitalGain << 12) | AnalogGainToWrite); */
> > +
> > +	/* AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite);
> > +	 */
> 
> this is best recommended for one line comment:
> 
> /* AnalogGainToWrite = (u16)((DigitalGain << 12) | AnalogGainToWrite); */

It then extends beyond 80 character in length. Will that be acceptable?

> 
> 
> 
> >  	AnalogGainToWrite = (u16)((DigitalGain << 12) | (u16)AnalogGain);
> >  	ret = mt9m114_write_reg(client, MISENSOR_16BIT,
> >  				REG_GAIN, AnalogGainToWrite);
> > @@ -1096,7 +1099,8 @@ static long mt9m114_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
> >  }
> >  
> >  /* This returns the exposure time being used. This should only be used
> > -   for filling in EXIF data, not for actual image processing. */
> > + * for filling in EXIF data, not for actual image processing.
> > + */
> >  static int mt9m114_g_exposure(struct v4l2_subdev *sd, s32 *value)
> >  {
> >  	struct i2c_client *client = v4l2_get_subdevdata(sd);
> > @@ -1297,7 +1301,7 @@ static int mt9m114_g_ev(struct v4l2_subdev *sd, s32 *val)
> >  
> >  /* Fake interface
> >   * mt9m114 now can not support 3a_lock
> > -*/
> > + */
> >  static int mt9m114_s_3a_lock(struct v4l2_subdev *sd, s32 val)
> >  {
> >  	aaalock = val;
> > diff --git a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> > index c17615149f46..91dca275a08e 100644
> > --- a/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> > +++ b/drivers/staging/media/atomisp/i2c/atomisp-ov2680.c
> > @@ -732,7 +732,8 @@ static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
> >  	 * existing integrations often wire two (reset/power_down)
> >  	 * because that is the way other sensors work.  There is no
> >  	 * way to tell how it is wired internally, so existing
> > -	 * firmwares expose both and we drive them symmetrically. */
> > +	 * firmwares expose both and we drive them symmetrically.
> > +	 */
> >  	if (flag) {
> >  		ret = dev->platform_data->gpio0_ctrl(sd, 1);
> >  		usleep_range(10000, 15000);
> > -- 
> > 2.25.1
> > 
> > 
> 
> multiline comment format should appear this way:
> 
> 	/*
> 	 * This is a comment, a
> 	 * multiline one.
> 	 */
> 
> with the first line of the comment empty.

Sounds good. The coding style guide also allows the other style for
specific driver types. I will improve this change according to your
feedback and resubmit.

thank you,
deepak.

> 
> thank you,
> 
> fabio