Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1161248AbWJRRwK (ORCPT ); Wed, 18 Oct 2006 13:52:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751518AbWJRRwJ (ORCPT ); Wed, 18 Oct 2006 13:52:09 -0400 Received: from dxv00.wellsfargo.com ([151.151.5.40]:5525 "EHLO dxv00.wellsfargo.com") by vger.kernel.org with ESMTP id S1751508AbWJRRwG convert rfc822-to-8bit (ORCPT ); Wed, 18 Oct 2006 13:52:06 -0400 content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 8BIT X-MimeOLE: Produced By Microsoft Exchange V6.0.6603.0 Subject: kernel oops with extended serial stuff turned on... Date: Wed, 18 Oct 2006 12:51:58 -0500 Message-ID: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: kernel oops with extended serial stuff turned on... Thread-Index: Acby3iLx2GtF9mX3SLKt/1ML33gBNw== From: To: X-OriginalArrivalTime: 18 Oct 2006 17:51:58.0778 (UTC) FILETIME=[1BAF69A0:01C6F2DE] X-WFMX: 0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 52109 Lines: 1254 Or maybe it's not exactly an oops..... Unfortunately I do not have the .config for this.... I do know that I had EVERY serial option turned on since I was trying to find a specific device.... See below: Linux version 2.6.18.1 (root@blackhole) (gcc version 3.3.6) #3 Tue Oct 17 22:02:19 PDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000eef0000 (usable) BIOS-e820: 000000000eef0000 - 000000000eeff000 (ACPI data) BIOS-e820: 000000000eeff000 - 000000000ef00000 (ACPI NVS) BIOS-e820: 000000000ef00000 - 000000000f000000 (usable) BIOS-e820: 00000000ffff8000 - 0000000100000000 (reserved) 240MB LOWMEM available. On node 0 totalpages: 61440 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 57344 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 HTCLTD ) @ 0x000f80f0 ACPI: RSDT (v001 HTCLTD HTC20F1 0x06040005 LTP 0x00000000) @ 0x0eefc451 ACPI: FADT (v001 HTCLTD HTC20F1 0x06040005 PTL 0x00000001) @ 0x0eefef64 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040005 LTP 0x00000001) @ 0x0eefefd8 ACPI: DSDT (v001 HTCLTD HTC20F1 0x06040005 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x8008 Allocating PCI resources starting at 10000000 (gap: 0f000000:f0ff8000) Detected 398.205 MHz processor. Built 1 zonelists. Total pages: 61440 Kernel command line: auto BOOT_IMAGE=cris-2.6.18.1-1 ro root=301 log_buf_len=4M log_buf_len: 4194304 No local APIC present or hardware disabled mapped APIC to ffffd000 (015e1000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 233332k/245760k available (3179k kernel code, 11856k reserved, 1649k data, 248k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 803.09 BogoMIPS (lpj=4015461) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0084893f 0081813f 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0084893f 0081813f 0000000e 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 256K (128 bytes/line) CPU: Processor revision 1.3.1.3, 400 MHz CPU: Code Morphing Software revision 4.2.7-8-278 CPU: 20011004 02:04 official release 4.2.7#7 CPU serial number disabled. CPU: After all inits, caps: 0080893f 0081813f 0000000e 00000000 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. CPU: Transmeta(tm) Crusoe(tm) Processor TM5400 stepping 03 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 08a0) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd8b9, last bus=0 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:06.0 PCI quirk: region 8000-803f claimed by ali7101 ACPI PCI quirk: region 8040-805f claimed by ali7101 SMB ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 6 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNK2] (IRQs 5 6 *7 11) ACPI: PCI Interrupt Link [LNK3] (IRQs *5 6 7 11) ACPI: PCI Interrupt Link [LNK4] (IRQs 5 6 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNK5] (IRQs 5 6 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNK6] (IRQs 5 6 7 *11) ACPI: PCI Interrupt Link [LNK7] (IRQs 5 6 7 11) *0, disabled. ACPI: PCI Interrupt Link [LNK8] (IRQs 5 6 7 *11) ACPI: PCI Interrupt Link [LNKU] (IRQs 5 6 7 *11) ACPI: Power Resource [PUSB] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices Generic PHY: Registered new driver SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:07: ioport range 0x40b-0x40b has been reserved pnp: 00:07: ioport range 0x480-0x48f has been reserved pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved pnp: 00:07: ioport range 0x8000-0x803f could not be reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:06.0 PCI: Bus 1, cardbus bridge: 0000:00:05.0 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 10000000-11ffffff MEM window: 12000000-13ffffff PCI: Bus 5, cardbus bridge: 0000:00:05.1 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 14000000-15ffffff MEM window: 16000000-17ffffff PCI: Bus 9, cardbus bridge: 0000:00:0b.0 IO window: 00002800-000028ff IO window: 00002c00-00002cff PREFETCH window: 18000000-19ffffff MEM window: 1a000000-1bffffff PCI: Enabling device 0000:00:05.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:05.1[A] -> Link [LNK3] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:05.1 to 64 PCI: Enabling device 0000:00:0b.0 (0000 -> 0003) ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNK6] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:0b.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered Simple Boot Flag at 0x36 set to 0x1 Total HugeTLB memory allocated, 0 NTFS driver 2.1.27 [Flags: R/W]. Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1 cpcihp_generic: not configured, disabling. vesafb: framebuffer at 0xfd000000, mapped to 0xcf880000, using 937k, total 2048k vesafb: mode is 800x600x8, linelength=800, pages=3 vesafb: protected mode interface info at c9cf:000e vesafb: pmi: set display start = c00c9d33, set palette = c00c9d87 vesafb: pmi: ports = vesafb: scrolling: redraw vesafb: Pseudocolor: size=6:6:6:6, shift=0:0:0:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] Using specific hotkey driver ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) RocketPort device driver module, version 2.09, 12-June-2003 No rocketport ports found; unloading driver. Cyclades driver 2.3.2.20 2004/02/25 18:14:16 built Oct 15 2006 02:35:46 Stallion Multiport Serial Driver: version 5.6.0 Stallion Intelligent Multiport Serial Driver: version 5.6.0 STALLION: failed to register serial memory device kobject_add failed for staliomem with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] subsystem_register+0xf/0x20 [] class_register+0x63/0x90 [] class_create+0x40/0x60 [] stli_init+0x99/0x180 [] istallion_module_init+0x5/0x10 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 STALLION: failed to register serial driver DIGI epca driver version 1.3.0.1-LK2.6 loaded. sx: Specialix IO8+ driver v1.11, (c) R.E.Wolff 1997/1998. sx: derived from work (c) D.Gorodchanin 1994-1996. sx: DTR/RTS pin is RTS when CRTSCTS is on. sx0: specialix IO8+ Board at 0x100 not found. sx1: specialix IO8+ Board at 0x180 not found. sx2: specialix IO8+ Board at 0x250 not found. sx3: specialix IO8+ Board at 0x260 not found. sx: No specialix IO8+ boards detected. MOXA Intellio family driver version 5.1k Tty devices major number = 172 MOXA Smartio/Industio family driver version 1.8 Computone IntelliPort Plus multiport driver version 1.2.14 rc: SDL RISCom/8 card driver v1.1, (c) D.Gorodchanin 1994-1996. rc0: RISCom/8 Board at 0x220 not found. rc1: RISCom/8 Board at 0x240 not found. rc2: RISCom/8 Board at 0x250 not found. rc3: RISCom/8 Board at 0x260 not found. rc: No RISCom/8 boards detected. kobject_add failed for ttyM0 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM1 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM2 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM3 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM4 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM5 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM6 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM7 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM8 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM9 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM10 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM11 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM12 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM13 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM14 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM15 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM16 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM17 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM18 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM19 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM20 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM21 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM22 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM23 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM24 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM25 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM26 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM27 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM28 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM29 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM30 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM31 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 kobject_add failed for ttyM32 with -EEXIST, don't try to register things with the same name in the same directory. [] kobject_add+0xd2/0xe0 [] class_device_add+0x9f/0x2a0 [] class_device_create+0x77/0x90 [] tty_register_device+0x5f/0x70 [] kobj_map+0xec/0x100 [] cdev_add+0x1d/0x30 [] tty_register_driver+0x19a/0x1b0 [] isicom_register_tty_driver+0xac/0xd0 [] isicom_setup+0x13e/0x1d0 [] riscom8_init+0x222/0x230 [] do_initcalls+0x53/0xf0 [] register_irq_proc+0x52/0x70 [] bm_status_read+0x50/0xd0 [] init+0x0/0x120 [] init+0x32/0x120 [] kernel_thread_helper+0x5/0x18 SyncLink serial driver $Revision: 4.38 $ SyncLink serial driver $Revision: 4.38 $, tty major#253 SyncLink MultiPort driver $Revision: 4.38 $ SyncLink MultiPort driver $Revision: 4.38 $, tty major#252 SyncLink GT $Revision: 4.25 $ SyncLink GT no devices found HDLC line discipline: version $Revision: 4.8 $, maxframe=4096 N_HDLC line discipline registered. Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A loop: loaded (max 8 devices) nbd: registered device at major 43 ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 ipw2100: Copyright(c) 2003-2006 Intel Corporation ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.2k ipw2200: Copyright(c) 2003-2006 Intel Corporation orinoco 0.15 (David Gibson , Pavel Roskin , et al) orinoco_cs 0.15 (David Gibson , Pavel Roskin , et al) orinoco_plx 0.15 (Pavel Roskin , David Gibson , Daniel Barlow ) orinoco_pci 0.15 (Pavel Roskin , David Gibson & Jean Tourrilhes ) orinoco_tmd 0.15 (Joerg Dorchain ) orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger ) spectrum_cs 0.15 (Pavel Roskin , David Gibson , et al) airo(): Probing for PCI adapters airo(): Finished probing for PCI adapters Loaded prism54 driver, version 1.2 hostap_cs: 0.4.4-kernel (Jouni Malinen ) hostap_plx: 0.4.4-kernel (Jouni Malinen ) hostap_pci: 0.4.4-kernel (Jouni Malinen ) usbcore: registered new driver zd1201 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:10.0 ACPI: Unable to derive IRQ for device 0000:00:10.0 ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: HMS360404D5CF00, CFA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 7999488 sectors (4095 MB) w/128KiB Cache, CHS=7936/16/63, UDMA(33) hda: cache flushes supported hda: hda1 Yenta: CardBus bridge found at 0000:00:05.0 [1054:0110] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:05.0, mfunc 0x012c1222, devctl 0x64 Yenta: ISA IRQ mask 0x0cd8, PCI irq 5 Socket status: 30000010 Yenta: CardBus bridge found at 0000:00:05.1 [1054:0110] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:05.1, mfunc 0x012c1222, devctl 0x64 Yenta: ISA IRQ mask 0x0cd8, PCI irq 5 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:0b.0 [12a3:ab01] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:0b.0, mfunc 0x01000002, devctl 0x60 Yenta: ISA IRQ mask 0x0000, PCI irq 11 Socket status: 30000010 pccard: PCMCIA card inserted into slot 0 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKU] -> GSI 11 (level, low) -> IRQ 11 ohci_hcd 0000:00:14.0: OHCI Host Controller ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:14.0: irq 11, io mem 0x000e0000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected Initializing USB Mass Storage driver... usb 1-1: new full speed USB device using ohci_hcd and address 2 pccard: PCMCIA card inserted into slot 2 usb 1-1: configuration #1 chosen from 1 choice usb 1-4: new full speed USB device using ohci_hcd and address 3 usb 1-4: configuration #1 chosen from 1 choice hub 1-4:1.0: USB hub found hub 1-4:1.0: 4 ports detected scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-4.1: new full speed USB device using ohci_hcd and address 4 usb 1-4.1: configuration #1 chosen from 1 choice hub 1-4.1:1.0: USB hub found hub 1-4.1:1.0: 3 ports detected usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver aiptek drivers/usb/input/aiptek.c: v1.5 (May-15-2004): Bryan W. Headley/Chris Atenasio drivers/usb/input/aiptek.c: Aiptek HyperPen USB Tablet Driver (Linux 2.6.x) usb 1-4.1.3: new full speed USB device using ohci_hcd and address 5 usb 1-4.1.3: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: ORTEK USB Keyboard Hub as /class/input/input0 input: USB HID v1.10 Keyboard [ORTEK USB Keyboard Hub] on usb-0000:00:14.0-4.1.3 input: ORTEK USB Keyboard Hub as /class/input/input1 input: USB HID v1.10 Device [ORTEK USB Keyboard Hub] on usb-0000:00:14.0-4.1.3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver kbtab drivers/usb/input/kbtab.c: v0.0.2:USB KB Gear JamStudio Tablet driver usbcore: registered new driver usbtouchscreen usbcore: registered new driver powermate usbcore: registered new driver wacom drivers/usb/input/wacom.c: v1.45:USB Wacom Graphire and Wacom Intuos tablet driver usbcore: registered new driver usb_acecad drivers/usb/input/acecad.c: v3.2:USB Acecad Flair tablet driver usbcore: registered new driver appletouch usbcore: registered new driver catc drivers/usb/net/catc.c: v2.8 CATC EL1210A NetMate USB Ethernet driver usbcore: registered new driver kaweth pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver usbcore: registered new driver pegasus drivers/usb/net/rtl8150.c: rtl8150 based usb-ethernet driver v0.6.2 (2004/08/27) usbcore: registered new driver rtl8150 usbcore: registered new driver asix usbcore: registered new driver cdc_ether usbcore: registered new driver gl620a usbcore: registered new driver net1080 usbcore: registered new driver plusb usbcore: registered new driver rndis_host usbcore: registered new driver cdc_subset usbcore: registered new driver zaurus usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for ark3116 usbcore: registered new driver ark3116 drivers/usb/serial/usb-serial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter usbcore: registered new driver belkin drivers/usb/serial/belkin_sa.c: USB Belkin Serial converter driver v1.2 drivers/usb/serial/usb-serial.c: USB Serial support registered for cp2101 usbcore: registered new driver cp2101 drivers/usb/serial/cp2101.c: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07 drivers/usb/serial/usb-serial.c: USB Serial support registered for Reiner SCT Cyberjack USB card reader usbcore: registered new driver cyberjack drivers/usb/serial/cyberjack.c: v1.01 Matthias Bruestle drivers/usb/serial/cyberjack.c: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for DeLorme Earthmate USB drivers/usb/serial/usb-serial.c: USB Serial support registered for HID->COM RS232 Adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Nokia CA-42 V2 Adapter usbcore: registered new driver cypress drivers/usb/serial/cypress_m8.c: Cypress USB to Serial Driver v1.09 drivers/usb/serial/usb-serial.c: USB Serial support registered for Digi 2 port USB adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Digi 4 port USB adapter usbcore: registered new driver digi_acceleport drivers/usb/serial/digi_acceleport.c: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 2 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 4 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport 8 port adapter usbcore: registered new driver io_edgeport drivers/usb/serial/io_edgeport.c: Edgeport USB Serial Driver v2.7 drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport TI 1 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Edgeport TI 2 port adapter usbcore: registered new driver io_ti drivers/usb/serial/io_ti.c: Edgeport USB Serial Driver v0.7 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for funsoft usbcore: registered new driver funsoft drivers/usb/serial/usb-serial.c: USB Serial support registered for Garmin GPS usb/tty usbcore: registered new driver garmin_gps drivers/usb/serial/garmin_gps.c: garmin gps driver v0.23 drivers/usb/serial/usb-serial.c: USB Serial support registered for hp4X usbcore: registered new driver hp4X drivers/usb/serial/hp4x.c: HP4x (48/49) Generic Serial driver v1.00 drivers/usb/serial/usb-serial.c: USB Serial support registered for PocketPC PDA drivers/usb/serial/ipaq.c: USB PocketPC PDA driver v0.5 usbcore: registered new driver ipaq drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan - (without firmware) drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 1 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 2 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan 4 port adapter usbcore: registered new driver keyspan drivers/usb/serial/keyspan.c: v1.1.4:Keyspan USB to Serial Converter Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan PDA drivers/usb/serial/usb-serial.c: USB Serial support registered for Keyspan PDA - (prerenumeration) drivers/usb/serial/usb-serial.c: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) usbcore: registered new driver keyspan_pda drivers/usb/serial/keyspan_pda.c: USB Keyspan PDA Converter driver v1.1 drivers/usb/serial/usb-serial.c: USB Serial support registered for KL5KUSB105D / PalmConnect usbcore: registered new driver kl5kusb105d drivers/usb/serial/kl5kusb105.c: KLSI KL5KUSB105 chipset USB->Serial Converter driver v0.3a drivers/usb/serial/usb-serial.c: USB Serial support registered for KOBIL USB smart card terminal usbcore: registered new driver kobil drivers/usb/serial/kobil_sct.c: 21/05/2004 KOBIL Systems GmbH - http://www.kobil.com drivers/usb/serial/kobil_sct.c: KOBIL USB Smart Card Terminal Driver (experimental) drivers/usb/serial/usb-serial.c: USB Serial support registered for MCT U232 usbcore: registered new driver mct_u232 drivers/usb/serial/mct_u232.c: Magic Control Technology USB-RS232 converter driver z2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for navman usbcore: registered new driver navman drivers/usb/serial/usb-serial.c: USB Serial support registered for ZyXEL - omni.net lcd plus usb usbcore: registered new driver omninet drivers/usb/serial/omninet.c: v1.1:USB ZyXEL omni.net LCD PLUS Driver drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303 usbcore: registered new driver pl2303 drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver drivers/usb/serial/safe_serial.c: v0.0b sl@lineo.com, tbr@lineo.com drivers/usb/serial/safe_serial.c: USB Safe Encapsulated Serial drivers/usb/serial/safe_serial.c: vendor: 0 product: 0 safe: 1 padded: 0 drivers/usb/serial/usb-serial.c: USB Serial support registered for safe_serial usbcore: registered new driver safe_serial drivers/usb/serial/usb-serial.c: USB Serial support registered for Sierra_Wireless usbcore: registered new driver sierra_wireless drivers/usb/serial/usb-serial.c: USB Serial support registered for TI USB 3410 1 port adapter drivers/usb/serial/usb-serial.c: USB Serial support registered for TI USB 5052 2 port adapter usbcore: registered new driver ti_usb_3410_5052 drivers/usb/serial/ti_usb_3410_5052.c: TI USB 3410/5052 Serial Driver v0.9 drivers/usb/serial/usb-serial.c: USB Serial support registered for Handspring Visor / Palm OS drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 3.5 drivers/usb/serial/usb-serial.c: USB Serial support registered for Sony Clie 5.0 usbcore: registered new driver visor drivers/usb/serial/visor.c: USB HandSpring Visor / Palm OS driver drivers/usb/serial/usb-serial.c: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) drivers/usb/serial/usb-serial.c: USB Serial support registered for Connect Tech - WhiteHEAT usbcore: registered new driver whiteheat drivers/usb/serial/whiteheat.c: USB ConnectTech WhiteHEAT driver v2.0 gs_module_init: cannot register gadget driver, ret=-22 pnp: Device 00:09 activated. PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output mk712: device not present input: PC Speaker as /class/input/input2 input: LBPS/2 Fujitsu Lifebook TouchScreen as /class/input/input3 i2c /dev entries driver i2c-pca-isa: i/o base 0x000330. irq 10 Vendor: LEXAR Model: JUMPDRIVE Rev: 1000 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 2030592 512-byte hdwr sectors (1040 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through SCSI device sda: 2030592 512-byte hdwr sectors (1040 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through sda: sda1 sda2 sd 0:0:0:0: Attached scsi removable disk sda usb-storage: device scan complete sdhci: Secure Digital Host Controller Interface driver, 0.12 sdhci: Copyright(c) Pierre Ossman wbsd: Winbond W83L51xD SD/MMC card interface driver, 1.6 wbsd: Copyright(c) Pierre Ossman Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNK8] -> GSI 11 (level, low) -> IRQ 11 ALSA device list: #0: ALI 5451 at 0x1000, irq 11 ip_conntrack version 2.4 (1920 buckets, 15360 max) - 172 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' ieee80211_crypt: registered algorithm 'CCMP' ieee80211_crypt: registered algorithm 'TKIP' Using IPI Shortcut mode ACPI: (supports S0 S1 S3 S4<6>Time: tsc clocksource has been installed. S5) Time: acpi_pm clocksource has been installed. drivers/rtc/hctosys.c: unable to open rtc device (rtc0) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 248k freed EXT3 FS on hda1, internal journal pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xdc000-0xfffff cs: memory probe 0x60000000-0x60ffffff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. airo(eth0): cmd= 111 airo(eth0): status= 7f11 airo(eth0): Rsp0= 2 airo(eth0): Rsp1= 0 airo(eth0): Rsp2= 0 airo(eth0): Doing fast bap_reads airo(eth0): WPA unsupported (only firmware versions 5.30.17 and greater support WPA. Detected 4.25.30) airo(eth0): MAC enabled 0:d:bc:98:c5:4 eth0: index 0x05: , Vpp 5.0, irq 5, io 0x0100-0x013f cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcbfff 0xdc000-0xfffff cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x600fffff cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia2.0 pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. hermes @ 00010140: BAP0 offset timeout: reg=0x8000 id=0xfd0b offset=0x0 eth1: Cannot read hardware identity: error -110 eth1: Incompatible firmware, aborting orinoco_cs: register_netdev() failed pcmcia: request for exclusive IRQ could not be fulfilled. pcmcia: the driver needs updating to supported shared IRQ lines. hermes @ 00010140: BAP0 offset error: reg=0x4000 id=0xfd0b offset=0x0 eth1: Cannot read hardware identity: error -5 eth1: Incompatible firmware, aborting orinoco_cs: register_netdev() failed airo(eth0): cmd= 1 airo(eth0): status= 7f01 airo(eth0): Rsp0= 88 airo(eth0): Rsp1= ff10 airo(eth0): Rsp2= a0 airo(eth0): cmd= 2 airo(eth0): status= 7f02 airo(eth0): Rsp0= 0 airo(eth0): Rsp1= ff10 airo(eth0): Rsp2= a0 airo(eth0): cmd= 1 airo(eth0): status= 7f01 airo(eth0): Rsp0= 88 airo(eth0): Rsp1= ff10 airo(eth0): Rsp2= a0 airo(eth0): cmd= 2 airo(eth0): status= 7f02 airo(eth0): Rsp0= 0 airo(eth0): Rsp1= ff10 airo(eth0): Rsp2= a0 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/