Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Rob Herring <robh+dt@kernel.org>,
        Jonathan Cameron <jic23@kernel.org>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Pengutronix Kernel Team <kernel@pengutronix.de>,
        David Jander <david@protonic.nl>,
        Robin van der Gracht <robin@protonic.nl>,
        linux-iio@vger.kernel.org, Lars-Peter Clausen <lars@metafoo.de>,
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        Dmitry Torokhov <dmitry.torokhov@gmail.com>
Subject: [PATCH v6 0/3] mainline ti tsc2046 adc driver
Date:   Wed, 28 Apr 2021 09:32:05 +0200
Message-Id: <20210428073208.19570-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

changes v6:
- get blessing from Dmitry Torokhov
- rebase against latest iio/testing
- use simple name for iio_dev->name
- use Jonathan's version for oversampling-ratio description 

changes v5:
- remove type for the settling-time-us property

changes v4:
- spell fixes
- add more comments
- make code more readable
- move scan_buf to the priv
- use FIELD_GET to extract ADC data
- make some multi line code as one line
- do not use atomic API for trig_more_count
- fix build warning on 64bit system
- add NULL check for the devm_kasprintf()
- use return devm_iio_device_register(), without additional error
  printing.

changes v3:
- different spell fixes
- add some notes about driver structure
- rename the trigger to point on the touchscreen nature of it
- rename DT binding to oversampling-ratio
- make sure we have some defaults in case no DT property is set

changes v2:
- rework and extend DT binding properties
- remove touchscreen related code from the IIO ADC driver
- make trigger be active longer then IRQ is requesting. This is needed
  to get "inactive" samples
- make oversampling and settle time configurable

TI TSC2046 is a touchscreen controller based on 8 channel ADC. Since most of
this ADC based touchscreen controller share same set of challenges, it
is better keep then as simple IIO ADC devices attached to a generic
resistive-adc-touch driver.

This driver can replace drivers/input/touchscreen/ads7846.c and has
following advantages over it:
- less code to maintain
- shared code paths (resistive-adc-touch, iio-hwmon, etc)
- can be used as plain IIO ADC to investigate signaling issues or test
  real capacity of the plates and attached low-pass filters
  (or use the touchscreen as a microphone if you like ;) )

Oleksij Rempel (3):
  dt-bindings:iio:adc: add generic settling-time-us and
    oversampling-ratio channel properties
  dt-bindings:iio:adc: add documentation for TI TSC2046 controller
  iio: adc: add ADC driver for the TI TSC2046 controller

 .../devicetree/bindings/iio/adc/adc.yaml      |  12 +
 .../bindings/iio/adc/ti,tsc2046.yaml          | 115 +++
 MAINTAINERS                                   |   8 +
 drivers/iio/adc/Kconfig                       |  12 +
 drivers/iio/adc/Makefile                      |   1 +
 drivers/iio/adc/ti-tsc2046.c                  | 720 ++++++++++++++++++
 6 files changed, 868 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tsc2046.yaml
 create mode 100644 drivers/iio/adc/ti-tsc2046.c

-- 
2.29.2