Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Laurent Dufour <ldufour@linux.ibm.com>
To:     mpe@ellerman.id.au, benh@kernel.crashing.org, paulus@samba.org
Cc:     nathanl@linux.ibm.com, linuxppc-dev@lists.ozlabs.org,
        linux-kernel@vger.kernel.org,
        Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Subject: [PATCH] ppc64/numa: consider the max numa node for migratable LPAR
Date:   Thu, 29 Apr 2021 20:19:01 +0200
Message-Id: <20210429181901.17674-1-ldufour@linux.ibm.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

When a LPAR is migratable, we should consider the maximum possible NUMA
node instead the number of NUMA node from the actual system.

The DT property 'ibm,current-associativity-domains' is defining the maximum
number of nodes the LPAR can see when running on that box. But if the LPAR
is being migrated on another box, it may seen up to the nodes defined by
'ibm,max-associativity-domains'. So if a LPAR is migratable, that value
should be used.

Unfortunately, there is no easy way to know if a LPAR is migratable or
not. The hypervisor is exporting the property 'ibm,migratable-partition' in
the case it set to migrate partition, but that would not mean that the
current partition is migratable.

Without that patch, when a LPAR is started on a 2 nodes box and then
migrated to a 3 nodes box, the hypervisor may spread the LPAR's CPUs on the
3rd node. In that case if a CPU from that 3rd node is added to the LPAR, it
will be wrongly assigned to the node because the kernel has been set to use
up to 2 nodes (the configuration of the departure node). With that patch
applies, the CPU is correctly added to the 3rd node.

Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
---
 arch/powerpc/mm/numa.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index f2bf98bdcea2..673fa6e47850 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -893,7 +893,7 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 static void __init find_possible_nodes(void)
 {
 	struct device_node *rtas;
-	const __be32 *domains;
+	const __be32 *domains = NULL;
 	int prop_length, max_nodes;
 	u32 i;
 
@@ -909,9 +909,14 @@ static void __init find_possible_nodes(void)
 	 * it doesn't exist, then fallback on ibm,max-associativity-domains.
 	 * Current denotes what the platform can support compared to max
 	 * which denotes what the Hypervisor can support.
+	 *
+	 * If the LPAR is migratable, new nodes might be activated after a LPM,
+	 * so we should consider the max number in that case.
 	 */
-	domains = of_get_property(rtas, "ibm,current-associativity-domains",
-					&prop_length);
+	if (!of_get_property(of_root, "ibm,migratable-partition", NULL))
+		domains = of_get_property(rtas,
+					  "ibm,current-associativity-domains",
+					  &prop_length);
 	if (!domains) {
 		domains = of_get_property(rtas, "ibm,max-associativity-domains",
 					&prop_length);
@@ -920,6 +925,9 @@ static void __init find_possible_nodes(void)
 	}
 
 	max_nodes = of_read_number(&domains[min_common_depth], 1);
+	printk(KERN_INFO "Partition configured for %d NUMA nodes.\n",
+	       max_nodes);
+
 	for (i = 0; i < max_nodes; i++) {
 		if (!node_possible(i))
 			node_set(i, node_possible_map);
-- 
2.31.1