Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     Pavel Machek <pavel@ucw.cz>, Rob Herring <robh+dt@kernel.org>,
        Thierry Reding <thierry.reding@gmail.com>,
        =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= 
        <u.kleine-koenig@pengutronix.de>, Lee Jones <lee.jones@linaro.org>,
        linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        linux-pwm@vger.kernel.org,
        Marijn Suijten <marijn.suijten@somainline.org>,
        Yassine Oudjana <y.oudjana@protonmail.com>,
        Luca Weiss <luca@z3ntu.xyz>,
        Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Subject: [PATCH v7 4/6] arm64: dts: qcom: sdm845: Enable user LEDs on DB845c
Date:   Thu, 29 Apr 2021 14:15:15 -0700
Message-Id: <20210429211517.312792-5-bjorn.andersson@linaro.org>
In-Reply-To: <20210429211517.312792-1-bjorn.andersson@linaro.org>
References: <20210429211517.312792-1-bjorn.andersson@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The DB845c has 4 "user LEDs", the last one is already supported as it's
just wired to a gpio. Now that the LPG binding is in place we can wire
up the other 3 LEDs as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v6:
- New patch

 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 24 ++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index 2d5533dd4ec2..e00a8dca2c64 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -593,6 +593,30 @@ resin {
 	};
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	qcom,power-source = <1>;
+
+	led@3 {
+		reg = <3>;
+		label = "green:user3";
+
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+
+	led@4 {
+		reg = <4>;
+		label = "green:user2";
+	};
+
+	led@5 {
+		reg = <5>;
+		label = "green:user1";
+	};
+};
+
 /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */
 &q6afedai {
 	qi2s@22 {
-- 
2.29.2