Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Samuel Holland <samuel@sholland.org>
To:     Rob Herring <robh+dt@kernel.org>,
        Maxime Ripard <mripard@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@siol.net>,
        Felipe Balbi <balbi@kernel.org>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:     devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-sunxi@lists.linux.dev, linux-usb@vger.kernel.org,
        linux-kernel@vger.kernel.org, Samuel Holland <samuel@sholland.org>
Subject: [PATCH v2 0/2] Allwinner H6 USB3 device tree updates
Date:   Thu, 29 Apr 2021 22:19:10 -0500
Message-Id: <20210430031912.42252-1-samuel@sholland.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

While implementing support for this USB controller in U-Boot, I noticed
that the reset line alsp affects they PHY. It looks like most platforms
use a separate glue node to represent this, and in fact there is already
a compatible for the H6 listed in drivers/usb/dwc3/dwc3-of-simple.c.

Since this layout matches the usual way of modeling this hardware, it
allows using the existing drivers without adding platform-specific code.


I tried to follow the existing DWC3 glue bindings (most of which are
still .txt). With this version, `make dt_binding_check` still raises a
couple of issues, which I do not know how best to fix:

  - Warning (unit_address_vs_reg): /example-0/usb@5200000: node has a
    unit name, but no reg or ranges property
    => Since there is no MMIO translation, an empty `ranges;` seemed
       appropriate, but it causes this warning.

  - usb@5200000: usb@5200000:phy-names:0: 'usb2-phy' was expected
    => This may be an issue with the snps,dwc3 binding, where the
       `items` list overrides `minItems`. I believe the intention is
       that both PHY references are optional. This implementation has
       only one PHY.

Changes from v1 to v2:
  - Updated the binding to reference the PHY binding by path correctly
  - Dropped DT updates for Pine H64

Samuel Holland (2):
  dt-bindings: usb: Document the Allwinner H6 DWC3 glue
  arm64: dts: allwinner: h6: Wrap DWC3 and PHY in glue layer

 .../usb/allwinner,sun50i-h6-dwc3.yaml         | 75 +++++++++++++++++++
 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   |  6 +-
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    |  6 +-
 .../dts/allwinner/sun50i-h6-tanix-tx6.dts     |  6 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 60 ++++++++-------
 5 files changed, 111 insertions(+), 42 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml

-- 
2.26.3