Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Rob Herring <robh@kernel.org>
To:     Samuel Holland <samuel@sholland.org>
Cc:     Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Maxime Ripard <mripard@kernel.org>, linux-usb@vger.kernel.org,
        Rob Herring <robh+dt@kernel.org>, linux-sunxi@lists.linux.dev,
        Felipe Balbi <balbi@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Jernej Skrabec <jernej.skrabec@siol.net>
In-Reply-To: <20210430031912.42252-2-samuel@sholland.org>
References: <20210430031912.42252-1-samuel@sholland.org> <20210430031912.42252-2-samuel@sholland.org>
Subject: Re: [PATCH v2 1/2] dt-bindings: usb: Document the Allwinner H6 DWC3 glue
Date:   Fri, 30 Apr 2021 10:24:53 -0500
Message-Id: <1619796293.743748.3353974.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Thu, 29 Apr 2021 22:19:11 -0500, Samuel Holland wrote:
> The RST_BUS_XHCI reset line in the H6 affects both the DWC3 core and the
> USB3 PHY. This suggests the reset line controls the USB3 IP as a whole.
> Represent this by attaching the reset line to a glue layer device.
> 
> Signed-off-by: Samuel Holland <samuel@sholland.org>
> ---
>  .../usb/allwinner,sun50i-h6-dwc3.yaml         | 75 +++++++++++++++++++
>  1 file changed, 75 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dts:23.27-50.11: Warning (unit_address_vs_reg): /example-0/usb@5200000: node has a unit name, but no reg or ranges property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dt.yaml: usb@5200000: usb@5200000:phy-names:0: 'usb2-phy' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/allwinner,sun50i-h6-dwc3.example.dt.yaml: usb@5200000: phy-names:0: 'usb2-phy' was expected
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/usb/snps,dwc3.yaml

See https://patchwork.ozlabs.org/patch/1471948

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.