Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2992612AbWJTSaU (ORCPT ); Fri, 20 Oct 2006 14:30:20 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S2992530AbWJTSaQ (ORCPT ); Fri, 20 Oct 2006 14:30:16 -0400 Received: from ug-out-1314.google.com ([66.249.92.169]:51665 "EHLO ug-out-1314.google.com") by vger.kernel.org with ESMTP id S1030334AbWJTSaM (ORCPT ); Fri, 20 Oct 2006 14:30:12 -0400 DomainKey-Signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=klJL+KIqH2YbZeXpeMOhXkDPXzgnKEDJgB1gFqTOpLc+vGZ1oceJs18I5B0g8F59Koj7YJgyAMnJCOy4KjNkF9NexzghHdM2T8VCjEKYnjsTbxQ7vyrdmoUVyHj9r4xD+EVTKXwy4ZbMsexwktZ5YMwpzNUo99qqS4hOAbyw/Q8= Message-ID: <3b0ffc1f0610201130i8f15e49oec2cdc68abb8dbd@mail.gmail.com> Date: Fri, 20 Oct 2006 14:30:08 -0400 From: "Kevin Radloff" To: "Linus Torvalds" , "Alan Cox" , "Jeff Garzik" Subject: Re: Linux 2.6.19-rc2 Cc: "Linux Kernel Mailing List" In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline References: Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11035 Lines: 245 On 10/13/06, Linus Torvalds wrote: > Ok, it's a week since -rc1, so -rc2 is out there. A bit behind, but booting still takes ages on my laptop as libata/ata_piix tries to probe a device that isn't there (I reported this previously against -rc1, but got no response): Linux version 2.6.19-rc2 (root@farstrider) (gcc version 4.1.2 20061007 (prerelease) (Debian 4.1.1-16)) #1 PREEMPT Tue Oct 17 11:40:02 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6f0000 (usable) BIOS-e820: 000000003f6f0000 - 000000003f6fb000 (ACPI data) BIOS-e820: 000000003f6fb000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1014MB LOWMEM available. Entering add_active_range(0, 0, 259824) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 259824 early_node_map[1] active PFN ranges 0: 0 -> 259824 On node 0 totalpages: 259824 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1997 pages used for memmap Normal zone: 253731 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 FUJ ) @ 0x000f5d80 ACPI: RSDT (v001 FUJ FJNB189 0x01070000 FUJ 0x00000100) @ 0x3f6f4c92 ACPI: FADT (v001 FUJ FJNB189 0x01070000 FUJ 0x00000100) @ 0x3f6faf8c ACPI: SSDT (v001 FUJ FJNB189 0x01070000 INTL 0x20030522) @ 0x3f6fab42 ACPI: BOOT (v001 FUJ FJNB189 0x01070000 FUJ 0x00000100) @ 0x3f6faf64 ACPI: DSDT (v001 FUJ FJNB189 0x01070000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0xfc08 Allocating PCI resources starting at 50000000 (gap: 40000000:bec10000) Detected 1100.104 MHz processor. Built 1 zonelists. Total pages: 257795 Kernel command line: root=/dev/sda3 ro acpi_sleep=s3_bios resume2=file:/dev/sda3:0x1f2df40 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=b0348000 soft=b0347000 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1027448k/1039296k available (1660k kernel code, 11372k reserved, 525k data, 120k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffff8000 - 0xfffff000 ( 28 kB) vmalloc : 0xf0000000 - 0xffff6000 ( 255 MB) lowmem : 0xb0000000 - 0xef6f0000 (1014 MB) .init : 0xb0324000 - 0xb0342000 ( 120 kB) .data : 0xb029f263 - 0xb0322a2c ( 525 kB) .text : 0xb0100000 - 0xb029f263 (1660 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2200.79 BogoMIPS (lpj=1100399) Mount-cache hash table entries: 512 CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 1100MHz stepping 05 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 0800) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd982, last bus=3 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region fc00-fc7f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region fc80-fcbf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #03 (-#06) is hidden behind transparent bridge #01 (-#03) (try 'pci=assign-busses') Please report the result to linux-kernel to fix this permanently ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 8 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bus 2, cardbus bridge: 0000:01:0a.0 IO window: 00003400-000034ff IO window: 00003800-000038ff PREFETCH window: 50000000-51ffffff MEM window: 56000000-57ffffff PCI: Bus 3, cardbus bridge: 0000:01:0a.1 IO window: 00003c00-00003cff IO window: 00001000-000010ff PREFETCH window: 52000000-53ffffff MEM window: 58000000-59ffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: d0200000-d02fffff PREFETCH window: 50000000-53ffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x7f set to 0x1 SGI XFS with no debug enabled io scheduler noop registered io scheduler cfq registered (default) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Lid Switch [LID] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 855 Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xd8000000 libata version 2.00 loaded. ata_piix 0000:00:1f.1: version 2.00ac6 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 scsi0 : ata_piix ata1.00: ATA-6, max UDMA/100, 156301488 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix ata2.00: ATAPI, max UDMA/33 ata2.01: qc timeout (cmd 0xa1) ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2.01: qc timeout (cmd 0xa1) ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2.01: qc timeout (cmd 0xa1) ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4) ata2: failed to recover some devices, retrying in 5 secs ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080A 0022 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > sda3 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: CD-ROM MATSHITA UJDA755 DVD/CDRW 1.00 PQ: 0 ANSI: 5 As is actually detected, there's a hard drive on the first channel and a DVD-ROM/CDRW on the second channel. 00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 01:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab) 01:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab) 01:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 03) 01:0a.3 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter (rev 01) 01:0a.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter 01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 01:0d.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) -- Kevin 'radsaq' Radloff radsaq@gmail.com http://thesaq.com/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/