Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII;
 format=flowed
Content-Transfer-Encoding: 7bit
Date:   Tue, 04 May 2021 20:38:29 +0200
From:   Michael Walle <michael@walle.cc>
To:     Vladimir Oltean <olteanv@gmail.com>
Cc:     xiaoliang.yang_1@nxp.com, Arvid.Brodin@xdin.com,
        UNGLinuxDriver@microchip.com, alexandre.belloni@bootlin.com,
        allan.nielsen@microchip.com, andre.guedes@linux.intel.com,
        claudiu.manoil@nxp.com, colin.king@canonical.com,
        davem@davemloft.net, idosch@mellanox.com,
        ivan.khoronzhuk@linaro.org, jiri@mellanox.com,
        joergen.andreasen@microchip.com, leoyang.li@nxp.com,
        linux-kernel@vger.kernel.org, m-karicheri2@ti.com,
        michael.chan@broadcom.com, mingkai.hu@nxp.com,
        netdev@vger.kernel.org, po.liu@nxp.com, saeedm@mellanox.com,
        vinicius.gomes@intel.com, vladimir.oltean@nxp.com,
        yuehaibing@huawei.com
Subject: Re: [net-next] net: dsa: felix: disable always guard band bit for TAS
 config
In-Reply-To: <20210504181833.w2pecbp2qpuiactv@skbuf>
References: <20210419102530.20361-1-xiaoliang.yang_1@nxp.com>
 <20210504170514.10729-1-michael@walle.cc>
 <20210504181833.w2pecbp2qpuiactv@skbuf>
User-Agent: Roundcube Webmail/1.4.11
Message-ID: <c7618025da6723418c56a54fe4683bd7@walle.cc>
Precedence: bulk

Hi Vladimir,

Am 2021-05-04 20:18, schrieb Vladimir Oltean:
> On Tue, May 04, 2021 at 07:05:14PM +0200, Michael Walle wrote:
>> Hi,
>> 
>> > ALWAYS_GUARD_BAND_SCH_Q bit in TAS config register is descripted as
>> > this:
>> > 	0: Guard band is implemented for nonschedule queues to schedule
>> > 	   queues transition.
>> > 	1: Guard band is implemented for any queue to schedule queue
>> > 	   transition.
>> >
>> > The driver set guard band be implemented for any queue to schedule queue
>> > transition before, which will make each GCL time slot reserve a guard
>> > band time that can pass the max SDU frame. Because guard band time could
>> > not be set in tc-taprio now, it will use about 12000ns to pass 1500B max
>> > SDU. This limits each GCL time interval to be more than 12000ns.
>> >
>> > This patch change the guard band to be only implemented for nonschedule
>> > queues to schedule queues transition, so that there is no need to reserve
>> > guard band on each GCL. Users can manually add guard band time for each
>> > schedule queues in their configuration if they want.
>> 
>> 
>> As explained in another mail in this thread, all queues are marked as
>> scheduled. So this is actually a no-op, correct? It doesn't matter if
>> it set or not set for now. Dunno why we even care for this bit then.
> 
> It matters because ALWAYS_GUARD_BAND_SCH_Q reduces the available
> throughput when set.

Ahh, I see now. All queues are "scheduled" but the guard band only 
applies
for "non-scheduled" -> "scheduled" transitions. So the guard band is 
never
applied, right? Is that really what we want?

>> > Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
>> > ---
>> >  drivers/net/dsa/ocelot/felix_vsc9959.c | 8 ++++++--
>> >  1 file changed, 6 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/net/dsa/ocelot/felix_vsc9959.c b/drivers/net/dsa/ocelot/felix_vsc9959.c
>> > index 789fe08cae50..2473bebe48e6 100644
>> > --- a/drivers/net/dsa/ocelot/felix_vsc9959.c
>> > +++ b/drivers/net/dsa/ocelot/felix_vsc9959.c
>> > @@ -1227,8 +1227,12 @@ static int vsc9959_qos_port_tas_set(struct ocelot *ocelot, int port,
>> >  	if (taprio->num_entries > VSC9959_TAS_GCL_ENTRY_MAX)
>> >  		return -ERANGE;
>> >
>> > -	ocelot_rmw(ocelot, QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port) |
>> > -		   QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
>> > +	/* Set port num and disable ALWAYS_GUARD_BAND_SCH_Q, which means set
>> > +	 * guard band to be implemented for nonschedule queues to schedule
>> > +	 * queues transition.
>> > +	 */
>> > +	ocelot_rmw(ocelot,
>> > +		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM(port),
>> >  		   QSYS_TAS_PARAM_CFG_CTRL_PORT_NUM_M |
>> >  		   QSYS_TAS_PARAM_CFG_CTRL_ALWAYS_GUARD_BAND_SCH_Q,
>> >  		   QSYS_TAS_PARAM_CFG_CTRL);
>> 
>> Anyway, I don't think this the correct place for this:
>>  (1) it isn't per port, but a global bit, but here its done per port.
> 
> I don't understand. According to the documentation, selecting the port
> whose time-aware shaper you are configuring is done through
> QSYS::TAS_PARAM_CFG_CTRL.PORT_NUM.

According to the LS1028A RM:

   PORT_NUM
   Specifies the port number to which the TAS_PARAMS register 
configurations
   (CFG_REG_1 to CFG_REG_5, TIME_INTERVAL and GATE_STATE) need to be 
applied.

I guess this work together with CONFIG_CHANGE and applies the mentions 
registers
in an atomic way (or at a given time). There is no mention of the
ALWAYS_GUARD_BAND_SCH_Q bit nor the register TAS_PARAM_CFG_CTRL.

But the ALWAYS_GUARD_BAND_SCH_Q mention its "Global configuration". That
together with the fact that it can't be read back (unless I'm missing
something), led me to the conclusion that this bit is global for the 
whole
switch. I may be wrong.

But in any case, (2) is more severe IMHO.

>>  (2) rmw, I presume is read-modify-write. and there is one bit 
>> CONFIG_CHAGE
>>      which is set by software and cleared by hardware. What happens if 
>> it
>> 	 will be cleared right after we read it. Then it will be set again, 
>> no?
>> 
>> So if we really care about this bit, shouldn't this be moved to switch
>> initialization then?
> 
> May I know what drew your attention to this patch? Is there something 
> wrong?

-michael