Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Message-ID: <7900502879b346e18727f956965ace34a146c0f1.camel@pengutronix.de>
Subject: Re: [RESEND v4 1/2] dt-bindings: imx6q-pcie: add one regulator used
 to power up pcie phy
From:   Lucas Stach <l.stach@pengutronix.de>
To:     lorenzo.pieralisi@arm.com
Cc:     linux-pci@vger.kernel.org, linux-imx@nxp.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        kernel@pengutronix.de, Richard Zhu <hongxing.zhu@nxp.com>,
        andrew.smirnov@gmail.com, shawnguo@kernel.org, kw@linux.com,
        bhelgaas@google.com, stefan@agner.ch
Date:   Thu, 06 May 2021 18:08:24 +0200
In-Reply-To: <1617091701-6444-2-git-send-email-hongxing.zhu@nxp.com>
References: <1617091701-6444-1-git-send-email-hongxing.zhu@nxp.com>
         <1617091701-6444-2-git-send-email-hongxing.zhu@nxp.com>
Content-Type: text/plain; charset="UTF-8"
User-Agent: Evolution 3.38.4 (3.38.4-1.fc33) 
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Hi Lorenzo,

have those two patches fallen through some crack? AFAICS they are gone
from patchwork, but I also can't find them in any branch in the usual
git repos.

Regards,
Lucas

Am Dienstag, dem 30.03.2021 um 16:08 +0800 schrieb Richard Zhu:
> Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY.
> In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data
> sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design,
> the VREG_BYPASS bits of GPR registers should be cleared from default
> value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be
> turned on.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> index de4b2baf91e8..d8971ab99274 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
> @@ -38,6 +38,9 @@ Optional properties:
>    The regulator will be enabled when initializing the PCIe host and
>    disabled either as part of the init process or when shutting down the
>    host.
> +- vph-supply: Should specify the regulator in charge of VPH one of the three
> +  PCIe PHY powers. This regulator can be supplied by both 1.8v and 3.3v voltage
> +  supplies.
>  
> 
>  Additional required properties for imx6sx-pcie:
>  - clock names: Must include the following additional entries: